Beginning of this page.
Jump to main content.

Please note that JavaScript and style sheet are used in this website,
Due to unadaptability of the style sheet with the browser used in your computer, pages may not look as original.
Even in such a case, however, the contents can be used safely.

NEC NEC Display Solutions, Ltd.
Site menu starts here.
Skip site menu.
End of site menu.
Displaying present location in the site.
Home > Monitor> LCD Monitor | MultiSync LCD3090WQXi / LCD3090WQXi-BK
Menu starts here.
Skip menu.
End of menu.

LCD Monitor MultiSync LCD3090WQXi / LCD3090WQXi-BK


spec
For the landscape mode For the portrait mode
For the landscape mode

Since several graphic tool windows, such as Illustrator, Photoshop and Flash, can be displayed without overlapping each other, deterioration of efficiency during creative operations can be prevented. Furthermore, by employing the IPS LCD panel, changes in brightness and tone due to alterations in the view angle can be reduced, so that multiple users can confirm images on the screen smoothly and accurately.

For the portrait mode

The Pivot function allows the horizontal monitor to rotate 90° into portrait modes. With the monitor in portrait mode, it is then possible to display an entire page of a newspaper or a website at once. Since you can execute edit, design, layout and proofreading operations without scrolling the screen with this function, you can set up more efficient working environments.

Top of this page

Features

By employing the IPS LCD panel, the display has been expanded to a size that had not been possible before, for a significant improvement in working efficiency.

The 29.8-inch WQXGA (2560 x 1600) wide + high definition screenWith the 30-inch WQXGA (2560 x 1600) wide + high definition screen, overwhelming expression capability that had not been possible before has been materialized. A lot of information can be displayed on the screen simultaneously without scrolling the screen. It is also possible to display the tool pallet or multiple windows without overlapping each other. By employing the IPS method wide LCD panel, the monitor has superior expression capabilities, for instance colour tones may not change at all while viewing from an angle, so that working efficiency can be improved dramatically. This monitor is the optimum solution for creative video editing, graphics, CAD and DTP as expressions and ideas are not cut off.


Colour Feedback System

With the built-in colour sensor, unstable brightness and chromaticity immediately after turning on the power are compensated automatically to make them stable within several minutes. Changes in brightness due to changes with the passage of time will also be compensated to keep brightness stable.

Materializing a wide colour gamut of 107% to Adobe® RGB and 102% to NTSC

The colour gamutThe colour gamut of the ordinary CRT monitor appreciated by professionals is mainly 72% to NTSC. The LCD3090WQXi materializes a colour gamut of 107% to Adobe® RGB and 102% to NTSC, which largely surpasses that for the CRT monitor. The monitor is capable of reproducing precisely original colours contained in Adobe® RGB data and exhibits superior performance responding to the strict requirements of professional production sites requiring highly accurate colour reproducibility.

Top of this page


Self-Calibration function

On the LCD3090WQXi, the calibration software is incorporated into the main unit, so that calibration of the Gamma property, the white point and the brightness can be executed by simply connecting to the external USB sensor* without a PC.
* Only i1 Display 2 of x-rite can be used.


Copy Calibration function

The copy calibration function, useful in a multi-display environment, is employed. It is possible to obtain the measured values (white point, brightness) from other monitors obtained with the external sensor and copy the values to the LCD3090WQXi.
* Only i1 Display 2 of x-rite can be used.


The two-system input capable of connecting two PCs

The two-system inputTwo connectors, the DVI-D connector capable of inputting signals from a PC in Digital to Digital mode, and the DVI-I connector capable of inputting either analogue or digital signals. Both of the input connectors support the copyright protection system, HDCP and the Dual Link.

The Stand Height Adjustment function

The Stand Height Adjustment functionThe unique stand and slim supports are applied. With the Stand Height Adjustment function raising/lowering the height of the monitor up to 190 mm, the monitor can be set at a visible position for the user or as necessary for the use environments.

Top of this page

Specifications

MultiSync LCD3090WQXi/LCD3090WQXi-BK

Model MultiSync LCD3090WQXi/LCD3090WQXi-BK Notes
LCD Module Diagonal: 756 mm/29.8 inches Active matrix; thin film transistor (TFT) liquid crystal display (LCD); 0.251 mm dot pitch
Viewable Image Size: 756 mm/29.8 inches
Native Resolution
(Pixel Count):
2560 x 1600
Input Signal Video:
Sync:
ANALOG 0.7 Vp-p / 75 Ohms
Separate sync TTL Level
Horizontal sync Positive / Negative
Vertical sync Positive / Negative
Composite sync. Positive/Negative
Sync on Green
(Video 0.7V p-p and Sync Negative 0.3V p-p)
Digital Input: DVI (with HDCP)
Display Colors 16,777,216 Depending on display card used.
Synchronization Range Horizontal:

Vertical:
24.0 kHz to 93.8 kHz (Analog)
31.5 kHz to 98.7 kHz (Digital)
24.0 Hz to 85 Hz
Automatically
Automatically
Automatically
Viewing Angles Horizontal:
Vertical:
178属 (CR > 10)
178属 (CR > 10)
Brightness 350 cd/m² *2
Contrast Ratio (typ.) 1000 : 1 *2
Image Formation Time 12 ms (Typ.) 6 ms (Gray to gray Typ)
Resolutions Supported
(Some systems may not support
all modes listed).
640 x 400*1 at 56 Hz (Analog)
640 x 480*1 at 60 Hz to 85 Hz
720 x 350*1 at 70 Hz to 85 Hz
720 x 400*1 at 70 Hz to 85 Hz
800 x 600*1 at 56 Hz to 85 Hz
832 x 624*1 at 75 Hz
1024 x 768*1 at 60 Hz to 85 Hz
1125 x 870*1 at 75 Hz
1152 x 900*1 at 66 Hz
1280 x 800*1 at 60 Hz
1280 x 960*1 at 60 Hz to 85 Hz
1280 x 1024*1 at 60 Hz to 85 Hz
1400 x 1050*1 at 60 Hz to 75 Hz
1440 x 900*1 at 60 Hz to 85 Hz
1600 x 1200*1 at 60 Hz to 75 Hz (Analog), at 60 Hz (Digital)
1680 x 1050*1 at 75 Hz (Analog)
1920 x 1200*1 at 60 Hz
1920 x 1440*1 at 60 Hz (Digital)
2560 x 1600 at 30 Hz
2560 x 1600 at 60 Hz (Digital)................
480P (720 x 480*1 at 60 Hz)
576P (720 x 576*1 at 50 Hz)
720P (1280 x 720*1 at 50 Hz to 60 Hz)
1080P (1920 x 1080*1 at 50 Hz to 60 Hz)




















NEC DISPLAY SOLUTIONS cites
recommended resolution for optimal display performance.
Active Display Area Landscape:Horiz.:
Vert.:
Portrait: Horiz.:
Vert.:
641 mm/25.2 inches
401 mm/15.8 inches
401 mm/15.8 inches
641 mm/25.2 inches
Power Supply AC 100-240 V ~ 50/60 Hz
Current Rating 1.76-0.77A (with option) For reference 1.6A (without option)
For Mexico 2.0A
Speakers Practical Audio Output: 1+1 watts
Dimensions Net:
Landscape:
Portrait:
Height Adjustment:

687.3 mm (W) x 478.6 - 668.6 mm (H) x 342.8 mm (D)
446.8 mm (W) x 703.5 - 788.9 mm (H) x 342.8 mm (D)
190 mm / 7.5 inches
Gross: 833 mm (W) x 649 mm (H) x 476 mm (D)
Weight Net:
Gross:
19.1 kg (42.0 lbs)
27.2 kg
Environmental Considerations Operating Temperature: 5°C to 35°C/41°F to 95°F
Humidity: 30% to 80%
Altitude: 0 to 9,842 Feet/0 to 3,000 m
Storage Temperature: -10°C to + 60°C / 14°F to 140°F
Humidity: 10% to 85%
Altitude: 0 to 40,000 Feet/0 to 12,192 m

Top of this page

*1 Interpolated Resolutions: When resolutions are shown that are lower than the pixel count of the LCD module, text may appear different. This is normal and necessary for all current flat panel technologies when displaying non-native resolutions full screen. In flat panel technologies, each dot on the screen is actually one pixel, so to expand resolutions to full screen, an interpolation of the resolution must be done.
*2 Condition: UNIFORMITY is OFF.
  NOTE: Technical specifications are subject to change without notice.

Top of this page

Dimensions


MultiSync LCD3090WQXi / LCD3090WQXi-BK Dimension

Top of this page

Options

Shading hood

90HD30

Shading hoodThe dedicated shading hood reduces the influence of the environmental lights.
By using this product, it is possible to reduce reflections from environmental lights, such as fluorescent lamps, on the screen. The window is provided on the top side, so that the monitor can be calibrated when this product is mounted.

* This product is dedicated to the monitor in landscape mode only. This cannot be used in portrait mode.

  • An adapter (optional) may be required to connect the display to an Apple computer. Confirm the shape of the connector on your Apple computer. No adapter is required to connect a model with the 15pin Mini D-sub VGA connector.
  • This product satisfies the criteria for the International Energy Star Program as a participating company in the International Energy Star Program.
  • The specifications and designs described in this site may be changed without notice.
  • Colours printed on this site may differ slightly from the actual product.
  • Confirm the terms of the warranty certificate and store carefully.
  • Read the operation manual carefully for proper use of the product.
  • For product prices with open prices, contact your retail dealer.
  • Images on the screen are pasted.
  • All brand and product names are registered trademarks of their respective holders.
    Further trademark information

Top of this page


End of main content.
Copyright NEC Display Solutions, Ltd. All rights reserved.