 |
 |
 |
 |
| *Images on the screen are synthesized inlaid pictures. | |
Features
Design considering long life and durability
Settings for the cooling fan reduce the load on the panel
The cooling fan turns according to the operating conditions of the panel and the location where the panel is installed, reducing the load on the panel under continuous use for a long time.
Enhanced heat-resistant components are employed
Enhanced heat-resistant components are employed in the electrolytic rectifier and the power supply circuits. Stable continuous operation for a long time within the operational environmental temperature range can be achieved.
Design considering the load on the power supply
Durable against voltage fluctuations in the power supply
Minimize influence from voltage fluctuations in the power supply such as malfunctions or hang-ups.
The load on the power supply can be reduced by employing the Power On Delay Function
When operating multiple monitors, the function prevents the overcurrent that may occur when the power is turned on by shifting the timing for turning the power on to the respective monitors with the breaker on. (You can select a value among the preset values within a range from 0 to 50 seconds.)
Scheduling function automatically turns ON/OFF the power
The Scheduling function automatically manages the power ON/OFF in the standard configuration.Set the automatic power ON/OFF with a simple operation by choosing either one of Everyday, Every day of the week and Every week (up to 7 settings). Furthermore, the power save mode moves to the pause state automatically if there are no input signals.
The Dual Picture Function activates the main and sub screens simultaneously to display a variety of images.
Various kinds of the main/sub (2 screens) display function includes PiP (Picture-in-Picture), where the sub screen is displayed on the main screen, and PoP (Picture-out-Picture), where the sub screen is displayed on the side of the main screen. Select the optimum display formation according to the uses and the purposes.
The monitor can be installed in any form anywhere - choose landscape or portrait mode and hang the panel from the ceiling or mount it on the wall.
The monitor can be installed according to the available space, the images to be displayed and the purpose of the display.
Choose between landscape mode and portrait mode, as well as an installation on the ceiling or mounted on the wall. (Compliant with VESA standards)
With the RS-232C connector, various kinds of control of the monitor are available.
Specifications
| Model | MultiSync LCD4615 | MultiSync LCD3215 | |||
| LCD Module | 46" / 1168 mm diagonal | 32" / 800 mm diagonal | |||
| Pixel Pitch: | 0.530mm | 0.511mm | |||
| Resolution: | 1920 x 1080 dots | 1366 x 768 dots | |||
| Colour: | Over 16 million colours (depending on video card used) | ||||
| Brightness: | 450cd / m2 (Typ.) | 500cd / m2 (Typ.) | |||
| Contrast Ratio: | 3000:1 | 800:1 | |||
| Viewing Angle: Horizontal: Vertical: |
178° (typ) @ CR>10 178° (typ) @ CR>10 |
||||
| Design View Distance: | 1300mm | 875mm | |||
| Frequency | Horizontal: | 15.625/15.734kHz, 31.5kHz - 91.1kHz | |||
| Vertical: | 50.0 - 85.0 Hz | ||||
| Pixel Clock | 25.0MHz - 165.0MHz | ||||
| Viewable Size | 1018.08 × 572.67mm | 697.7 x 392.3mm | |||
| Input Signal | RGB1 | DVI-D 24pin | Digital RGB | DVI (HDCP) VGA60, SVGA60, XGA60, WXGA60, SXGA60*1, UXGA60*1, 1920 × 1080*1 (60Hz) |
|
| RGB2 | 15pin Mini D-sub | Analog RGB | 0.7V p-p / 75 ohm VGA60, SVGA60, XGA60, WXGA60, SXGA60*1, UXGA60*1, 1920 × 1080*1 (60Hz) |
||
| Sync | Separate: TTL level (Pos./Neg.) | ||||
| RGB3 | BNC (R,G,B,H,V) | Analog RGB | 0.7V p-p / 75 ohm VGA60, SVGA60, XGA60, WXGA60, SXGA60*1, UXGA60*1, 1920 × 1080*1 (60Hz) |
||
| Sync | Separate: TTL level (Pos./Neg.) | ||||
| DVD/HD | RCA (Y, Cb/Pb, Cr/Pr) |
Component | Y : 1.0Vp-p/75ohm, Cb/Cr (Pb/Pr) : 0.7Vp-p/75 ohm HDTV/DVD: 1080i@60Hz, 1080p@60Hz, 720p@50Hz/60Hz, 576p@50Hz, 480p@60Hz, 576i@50Hz, 480i@60Hz |
||
| VIDEO(S) | Mini DIN 4 pin | S-VIDEO | Y: 1.0Vp-p/75 ohm C: 0.286Vp-p/75 ohm (NTSC), 0.3Vp-p/75 ohm (PAL/SECAM) NTSC/PAL/SECAM/4.43NTSC/PAL60 | ||
| VIDEO | BNC RCA |
Composite | 1.0V p-p / 75 ohm NTSC / PAL / SECAM / 4.43NTSC / PAL60 |
||
| Output Signal | RGB | 15pin Mini D-sub | Analog RGB | 0.7V p-p with 75 ohm terminated Separate HV sync: TTL level (Posi / Nega) |
|
| VIDEO | BNC | Composite | 1.0V p-p with 75 ohm terminated | ||
| AUDIO | AUDIO Input | RCA (L/R) X2
STEREO Mini Jack |
Analog Audio | Stereo L/R 0.5Vrms | |
| AUDIO Output | RCA (L/R) | Analog Audio | Stereo L/R 0.5Vrms | ||
| Speaker Output | External Speaker Jack 7W + 7W (8 ohm) | ||||
| Control | RS-232C In: | 9 Pin D-sub | |||
| Power Supply | 2.4 - 1.0A @ 100-240VAC, 50/60Hz | 1.4 - 0.6A @ 100-240VAC, 50/60Hz | |||
| Operational Environment | Temperature: Humidity: Altitude: |
5 - 40°C (landscape), 5 - 35 °C (portrait) 20 - 80% (Without condensation) 0-3000m |
|||
| Storage Environment | Temperature: Humidity: |
-20 - 60°C 10 - 90% (Without condensation) / 90% - 3.5% x (Temp - 40°C) regarding over 40°C |
|||
| Dimension | Net: Gross: |
1121.5 (W) x 664.7 (H) x 129.8 (D) mm (Without stand) 1270 (W) x 769 (H) x 275 (D) mm |
789 (W) x 476.3 (H) x 133 (D) mm (Without stand) 926 (W) x610 (H) x 286 (D) mm |
||
| Weight | Net: Gross: |
23.9Kg 29.5Kg |
13.1Kg 17.7Kg |
||
| VESA compatible arm mounting interface | 200 mm x 200 mm (4 Holes) | ||||
| Complied Regulatory and Guidelines | UL60950-1/CSA C22.2 No.60950-1/TUV-GS/EN60950-1 FCC-B/DOC-B/EN55022-B/EN55024/EN61000-3-2/ EN61000-3-3/CE/GOST-R |
||||
| Power Management | VESA DPM | ||||
| Plug & Play | VESA DDC2B, DDC/CI | ||||
| Accessories | Setup manual, Power Cord, Video Signal Cable, Remote Control, AAA Battery x 2, Clamp x 2, Screw for Main swich cover x 2, Screw for Clamp x 2, CD-ROM, Thumbscrew for stand x 2, Main switch cover, Table-top stand(option), Stereo speakers(option) | Setup manual, Power Cord, Video Signal Cable, Remote Control, AAA Battery x 2, Clamp x 2, Screw for Main swich cover x 2, Screw for Clamp x 2, CD-ROM, main switch cover, Table-top stand(option), Stereo speakers(option) | |||
Dimensions
MultiSync LCD4615
MultiSync LCD3215
Terminals
| 1 ) | AC IN connector Connects with the supplied power cord. |
8 ) | AUDIO OUT To output the audio signal from the AUDIO IN 1, 2 and 3 jack to an external device (stereo receiver, amplifier, etc.). |
| 2 ) | RGB 1 IN (DVI-D) To input digital RGB signals from a computer or HDTV device having a digital RGB output. * This connector does not support analog input. |
9 ) | VIDEO INPUT / OUTPUT Connector VIDEO IN connector (BNC and RCA): To input a composite video signal. BNC and RCA connectors are not available at the same time (Use only one input). VIDEO OUT connector (BNC): To output the composite video signal from the VIDEO IN connector. VIDEO(S) IN connector (Mini DIN 4 pin): To input the VIDEO(S) (Y/C separate signal). |
| 3 ) | RGB 2 IN (mini D-Sub 15 pin) To input analog RGB signals from a personal computer or from other RGB equipment. |
||
| 4 ) | RGB 3 IN [R, G, B, H, V] (BNC) To input analog RGB signals or signals from other RGB equipment. This is also to connect equipment such as a DVD player, HDTV device and Set-Top-Box. |
10 ) | EXTERNAL CONTROL (D-Sub 9 pin) Connect RS-232C input from external equipment such as a PC in order to control RS-232C functions. |
| 5 ) | RGB OUT (mini D-Sub 15 pin) To output the signal from the RGB2 and RGB3 IN connector to an input on a separate device. |
11 ) | EXTERNAL SPEAKER TERMINAL To output the audio signal from AUDIO 1, 2, 3. Note: This speaker terminal is for optional speaker. SP-3215 for MultiSync LCD3215, SP4020-4620 for MultiSync LCD4215, SP-4615 for MultiSync LCD4615. When you use SP4020-4620 for LCD4215, please use SP4020-4620 with large extension blocks (included in speaker), as if being mounted on LCD4620. (LCD4215 is not mentioned in SP4020-4620 manual). |
| 6 ) | DVD/HD IN [Y,Cb/Pb,Cr/Pr](BNC) Connecting equipment such as a DVD player, HDTV device, or Set-Top-Box. |
||
| 7 ) | AUDIO IN 1,2,3 To input audio signal from external equipment such as a computer, VCR or DVD player. |
Options
Table-top stand
ST-4620
ST-3215
Stereo speakers
SP-4615
Installation Example : SP-4615
SP-3215
- Although TFT colour LCD panels are produced with advanced technologies of very high accuracy, there may be some missing or defective pixels. Please note these phenomena are unavoidable.
- Be advised that processing original images, such as compressing or extending, for public display on a wide screen TV in a public area whether or not for profit may infringe rights protected under copyright laws.
- To connect the display to an Apple's Mac Series, an adapter (optional) may be required. Confirm the shape of the connector on your Apple's Mac Series. No adapter is required for connecting to a model with the mini D-sub 15-pin VGA connector.
- The specifications and designs described in this site may be changed without notice.
- Colours printed on this site may differ slightly from the actual product.
- Confirm the terms of the guarantee certificate and store it carefully.
- Read the operation manual carefully for proper use of the product.
- Images on the screen are pasted. Software shown on the screen is used for demonstration purposes only and may not be available commercially.
- All brand and product names are registered trademarks of their respective holders.
Further trademark information