Features
World's narrowest* bezel achieving seamless video
Bezel width of only 6.7mm (with multi configuration), demonstrating
the power of impressive large screen video wall with seamless
expressiveness without the discomfort.
*For 46" LCD（As of March 2009, company survey）
Max. 10 x 10 Multi Screen Configurations
Maximum 10 horizontal & vertical multi screen configuration available using tile matrix function enables 460" video wall. Multi screen configurations can be transported and installed to existing buildings easier than compared to super 100" large screen displays.
AMBIENT Mode Automatically Adjust Brightness
Functions newly loaded for automatically controlling display brightness
to the perfect brightness recognizing changes to surrounding
brightness by connecting the optional sensor
unit to this device. Power usage at
eco-standby reduced to maximum 0.5W. No
excess power used contributing to global
environment preservation.
Max. Brightness 700cd/m2, Contrast Ratio 3000:1
Employs high quality 46"（1366 x 768）WXGA LCD panel. Produces or many devices connected. beautiful images for high brightness, high contrast ratio viewing, suppressing color reversal even when viewed from an angle with a horizontal and vertical viewing angle of 178°
Multi Screen Color Alignment Compatibility at Shipment
X461UN is shipped after brightness and color temperature adjusted
separately*. This pre-adjusted shipment realizes easy installation and
good image quality of video walls.
* Set within Brightness 500cd/m2, Color Temperature 10000k range.
Calibration Function for Multi Screen Aging
Uses dedicated calibration software and commercially available color sensor when color differences occur with each display due to aging changes, simplifying color alignment.
Color Alignment Settings
3 Steps for Calibration
- Launches dedicated calibration software to measure monitor brightness and color temperature with color sensor for each LCD.
- Sets target brightness/color temperature/gamma values after measurement.
- Executes batch calibration.
Control using network connection with LAN Control
Simplifies central control of multiple displays
Supports remote control through multi connection using RS-232C and LAN control using connection via network. Display operations and setting can be changed from 1 host computer.
Power ON/OFF Switch Display Input Adjust Contrast/BrightnessCheck Internal Temperature Check Input Signal Status Change Screen Size"Self Diagnostics Function" for Quick, Easy Problem Finding
Failure location detection/clarification and fast recovery response with 1 or many devices connected.
* Effective with RS-232C and LAN control.
Backlight Lighting Status Power Monitoring Temperature Increase in Main Unit* Remote control and "Self Diagnostics Function" require separate control application development.
Specifications
| Model | MultiSync X461UN | |
| Panel Technology | S-PVA TFT | |
| Active Screen Area（W x H）［mm］ | 1018.4 x 572.5 | |
| Screen Size ［nch/cm］ | 46/117.0 | |
| Viewing Angle（typ.） | 178° horizontal / 178° vertical（typ. at contrast ratio 10:1） | |
| Screen Aspect Ratio | 16:9 | |
| Pixel Pitch［mm] | 0.746 x 0.746 | |
| Contrast Ratio（typ.） | 3000:1 | |
| Brightness（typ.）［cd/m2］ | 500 at 5°C - 40°C（factory setting）, 650 at 5°C - 20°C, 700 at 5°C - 8°C | |
| Response Time（typ.）［ ms］ | 8（tr + tf; grey-to-grey）; 16（6 white/black; 10 black/white） | |
| Colours［million］ | 16.77 | |
| Horizontal Frequency［kHz］ | 31.5 - 91.1（analog and digital） | |
| Vertical Frequency［Hz］ | 50.0 - 85.0 | |
| Optimum Resolution | 1360 x 768 at 60 Hz | |
| Native Resolution | 1366 x 768 at 60 Hz | |
| Other Resolutions | 1920 x 1080* ; 1366 x 768; 1440 x 1050; 1680 x 1050; 1600 x 1200; 1280 x 1024; 1280 x 768; 1024 x 768; 832 x 624; 800 x 600; 720 x 400; 640 x 480 |
|
| Video Input | Analog: 5 x BNC, Component, Composite（via BNC and RCA）; 1 x S-Video; 1 x Dsub 15; Digital: 1 x DVI-D（with HDCP）; HDMI 1.3 |
|
| Video Output | Analog: 5 x BNC, Composite（via BNC） | |
| Audio Input | 2 x RCA, 1 x 3.5 mm Head-jack | |
| Audio Output | 1 x RCA | |
| Option Slot | Built-in PC, DVI daisy chain board, HD-SDI board | |
| Plug & Play Safety and Ergonomics |
VESA DDC2Bi UL/C-UL or CSA; FCC Class B; TUV GS; VCCI; CE; C-tick; PSB; CCC |
|
| Power Consumption（typ.）［W］ | 200（at 500 cd/m2）; 330（max.） | |
| Power Management | VESA DPMS | |
| Power Requirements | 100 - 120/220 - 240 V; 3.6/1.45 A; internal power supply | |
| Operating Temperature［°C］ | +5 to +40** | |
| Operating Humidity［%］ | 20 to 80 | |
| VESA Mounting Interface［mm］ | 300 x 300（FDMI）; 4 holes | |
| Dimensions （W x H x D）［mm］ |
（Net） |
1025.7 x 579.8 x 128.1 |
| （Gross） | 143.25 x 96.8 x 46.4 | |
| Bezel Width［mm］ |
4.6 top/left; 2.7 bottom/right | |
| Features | 10 bit LUT for calibration, 10 x 10 Tile Matrix with up 100 IDs through RS232, copy display settings through RS232, user controllable back up fans with 2 speeds; TCP / IP control, external ambient light + IR sensor |
|
| Weight ［kg］ | （Net） |
29.3 |
| （Gross） | 43.5 | |
| Supported Video Signals | NTSC; PAL; SECAM | |
| Video Modes | 480i; 480p; 576i; 576p; 2 x 720p（50 and 60 Hz）; 2 x 1080i（50 and 60 Hz）; 2 x 1080p（50 and 60 Hz） |
|
| Audio Functions | Amplifier: 2x 15 Watt, no optional speakers | |
| Remote Control | RS-232C（9 pin D-Sub） Input + Output; Dsub 15 and DVI-D（DDC/CI）; Remote Control IR | |
| Colour Versions | Black Front Bezel/Black Back Cabinet | |
| Accessories | Setup manual, Power Cord, Video Signal cable, Stereo Mini plug cable (3.5 ), Clamp x 3, Screw x 9, CD-ROM, Thumbscrew for stand x 2, Cable cover |
|
Dimensions
Terminals
Options
Remote Control Kit
KT-RC
【Kit Contents】
Remote Controller/Sensor Unit/
Unit Connection Cable
Independent Stand
ST-4620
Horizontal Positioning
Dedicated Independent Stand
DVI Daisy Chain Board
SB-L008WU
・Equipped with DVI-D（Input）
and DVI-D（Through Out）
Attached to option slot
・Can connect up to Max.
9 with daisy chain
・Power Save Mode not available
・Includes one（1）2m DVI-D cable
Over Frame Kit
KT-46UN-OF
Plate set for covering monitors sides
（horizontal and vertical）
【Kit Contents】
・Frame Top x 1 ・Frame Left x 1
・Frame Bottom x 1 ・Corner x 4
・Frame Right x 1
・Joint x 4
Wall Mount Kit
WM-46UN-L（Horizontal Installed Type）
WM-46UN-P（Vertical Installed Type）
Multi screen configuration support jig set equipped
with micro adjustment function（horizontal/vertical）
【Kit Contents】
・Wall Side Jig（Top）x 1 ・Wall Side Jig（Bottom）x 1
・Display Jig（Top）x 2 ・Display Jig（Bottom）x 2 ・Adjustment Pin x 2
・Stopper x 2 ・Attachment Screw x 20 ・Hexagonal Wrench x 1
- Although TFT colour LCD panels are produced with advanced technologies of very high accuracy, there may be some missing or defective pixels. Please note these phenomena are unavoidable.
- Be advised that processing original images, such as compressing or extending, for public display on a wide screen TV in a public area whether or not for profit may infringe rights protected under copyright laws.
- To connect the display to an Apple's Mac Series, an adapter (optional) may be required. Confirm the shape of the connector on your Apple's Mac Series. No adapter is required for connecting to a model with the mini D-sub 15-pin VGA connector.
- The specifications and designs described in this site may be changed without notice.
- Colours printed on this site may differ slightly from the actual product.
- Confirm the terms of the guarantee certificate and store it carefully.
- Read the operation manual carefully for proper use of the product.
- Images on the screen are pasted. Software shown on the screen is used for demonstration purposes only and may not be available commercially.
- All brand and product names are registered trademarks of their respective holders.
Further trademark information