For medium-sized screens,the NEC NC1600C digital cinema projector delivers high quality output and ease of operation. Managers can set lens position and lamp output using memory functions, and perform lamp changes easily from the back of projector. Other features include optional touch screen control, auto lamp brightness control, and compatibility with most standard film projector lamps. *5
Suitable for screens up to 20M (65ft) *3 *6
Precise 2K (2048 x 1080) resolution
High contrast 2000:1 images
Easy to operate
- Industry’s FIRST memory functions for lens zoom, position/focus and lamp output *4
- Industry’s FIRST Lamp changes from the back of projector *1
- Direct selection buttons for 8 stored projector configurations
- Projector can be controlled from an optional touch screen
- Auto lamp brightness control
- Standard Film projector lamps can be used *5 (requires adapter available from NEC)
- Built-in webserver allows basic control from any web browser
Minimal maintenance
- DLP chip shielding prevents dust, oil and smoke particles from settling on DLP chip surface *3
- Self-contained liquid cooling system - no external reservoir
*1 Among DLP Cinema Projectors, according to a survey conducted by NEC in June, 2007.
*2 Integrated-type" means projector head and lamp power supply unit are integrated in the projector
*3 Subject to installation conditions.
*4 Various aspect ratios and corresponding brightness levels can be stored and retrieved automatically.
*5 Recommended standard film projector lamp bulbs will be listed on here.
*6 This can be achieved under the below instllation conditions.
1) At screen gain 1.8/14ft-1
2) Use USHIO DXN-40SN 4kW lamp
*2 Integrated-type" means projector head and lamp power supply unit are integrated in the projector
*3 Subject to installation conditions.
*4 Various aspect ratios and corresponding brightness levels can be stored and retrieved automatically.
*5 Recommended standard film projector lamp bulbs will be listed on here.
*6 This can be achieved under the below instllation conditions.
1) At screen gain 1.8/14ft-12) Use USHIO DXN-40SN 4kW lamp Specifications
| Projection method | 3-chip DLP chip reflection method | |||||||||||||||||||||||||||
| DLP chip specification Size, Type, Resolution | 0.98", 12° tilt angle, 2048 x 1080 pixels | |||||||||||||||||||||||||||
| Light Output*1 | 17,000 ANSI Lumens*2 | |||||||||||||||||||||||||||
| Supported screen sizes | minimum |
-at screen gain 1.3 / 14ft-l 5 meters (16 feet) *3 | ||||||||||||||||||||||||||
| maximum |
-at screen gain 1.8 / 14ft-l 20 meters (65 feet) *2
-at screen gain 1.3 / 14ft-l 17 meters (56 feet) *2 |
|||||||||||||||||||||||||||
| Contrast ratio | 2200 : 1 or above (full on / off) | |||||||||||||||||||||||||||
| Primary lenses | 1.30 to 1.75:1 zoom "NC-60LS13Z" *4 | (Note : select according to magnifications of installation environment) |
||||||||||||||||||||||||||
| 1.40 to 2.05:1 zoom "NC-60LS14Z" | ||||||||||||||||||||||||||||
| 1.59 to 2.53:1 zoom "NC-60LS16Z" | ||||||||||||||||||||||||||||
| 1.90 to 3.25:1 zoom "NC-60LS19Z" | ||||||||||||||||||||||||||||
| 2.40 to 3.90:1 zoom "NC-60LS24Z" | ||||||||||||||||||||||||||||
| 3.90 to 6.52:1 zoom "NC-60LS39Z" | ||||||||||||||||||||||||||||
| Lamp bulbs | NEC certified digital Xenon lamp bulbs 2.0kW, 4.0kW Compatible standard film projector lamp bulbs |
|||||||||||||||||||||||||||
| Standard 2kW / 3kW film lamp bulbs *5 (4kW film lamps cannot be used for NC1600C) |
||||||||||||||||||||||||||||
| DLP Cinema functions | CineLinkTM, CineCanvasTM, CinePaletteTM, CineBlackTM | |||||||||||||||||||||||||||
| Lens adjustment functions | Motorized focus, zoom, horizontal/vertical shift, light shutter(dowser) * Range of motorized shift is dependent on lens |
|||||||||||||||||||||||||||
| Cooling method |
|
|||||||||||||||||||||||||||
| Fan noise | Less than 63 dB | |||||||||||||||||||||||||||
| Power supply voltage | 200 to 240V AC, 50/60Hz, single phase * Power cord not included in the projector package and shall be procured by exhibitors |
|||||||||||||||||||||||||||
| Rated input current | 30A Max | |||||||||||||||||||||||||||
| Power consumption | 5500W (T.B.D) | |||||||||||||||||||||||||||
| Environment | Operational temperatures |
10°C to 35°C (41°F to 95°F) , humidity : 10% to 80% (non- condensing) | ||||||||||||||||||||||||||
| Storage temperatures |
-10°C to 50°C (14°F to 122°F), humidity : 10% to 80% (non-condensing) | |||||||||||||||||||||||||||
| Regulations |
|
|||||||||||||||||||||||||||
| External dimensions | Projector : 700 (W) × 990 (D) × 503 (H) (mm)
 27.6 (W) × 39.0(D) × 19.8 (H) (inch) * Excluding lens, lens hood and exhaust stack. |
|||||||||||||||||||||||||||
| Weight | Projector : Approx.99kg / 218 lb * Excluding lens and removable handle. |
|||||||||||||||||||||||||||
*Specifications are subject to change without prior notice.
| *1 | Measured at center screen |
| *2 | This can be achieved under using USHIO DXN-40SN 4kW lamp |
| *3 | Subject to installation conditions |
| *4 | Anamorphic lens cannot be used with following primary lenses due to the limitation of the anamorphic lens
If actual lens magnifications for CS display doesn't fit the attached primary lens, please change into a primary lens fittable for CS display. |
| *5 | Recommended standard film projector lamp bulbs will be listed on here. |
Input / Output terminal
| Type | Name | Description | Quantity |
| Input Terminals | HDSDI port | BNC | 2 |
| DVI port | DVI-digital | 2 | |
| External control |
PC card slot | For compact flash memory card or wireless LAN card |
1 |
| LAN port | RJ-45 | 2 | |
| USB port | Type A | 1 | |
| Serial port(RS-232C) | D-sub (9-pin) | 1 | |
| General Purpose Input / Output | D-sub (37-pin) | 1 | |
| Remote control connector | Stereo mini | 1 |
Standard supplied accessories *1
- Remote control unit
- Cable for remote control unit (16 m / 629 inch)
- User’s manual
- Film lamp adapter, for 2.0kW / 3.0kW film projector lamp bulbs
*Lens adapter is built in the NC1600C primary lenses
Optional accessories *1
- Pedestal for NC2500S and NC1600C projection head "NC-PD02"
- Air filter for replacement "NC-16AF01"
*This air filter should be replaced whenever a new lamp bulb is replaced. - Touch panel controller "NC-TP6402" & Holder arm "NC-TH6402"
- Lamp house
*Not lamp house, but reflector (supplied as Service part from NECDS) - Anamorphic lens x1.25 "AL 1.25-E" motorized anamorphic turret "NC-AT02"
- Multi-Media Switcher for alternative content
Built-in type Multi-Media Switcher with Video input & Analogue RGB input "MM2000B"
*Standalone type Multi-Media switcher with Video input & Analogue RGB input "MM2000"- 【Optional input Board for Multi-Media Switcher】
- Single HD / SDI Input Board "MM-SDI-E"
- DVI-D Input board (Dual link) "MM-DVI-E"
- HDCP compliant DVI-D Input board (single link) "MM-70DV01"
- Analogue RGB Input Board "MM-RGB-E"
- Video Input Board "MM-VIDEO-E"
- Film lamp adapter, for 3.0kW film projector lamp bulbs "NC-25CL02"
Recommended standard film projector lamp bulbs
| *1 | Standard supplied accessories and Optional accessories are subject to change without notice. |
Dimensions
System configration
DLP, DLP Cinema and their respective logos are registered trademarks or trademarks of Texas Instruments.
CineLink,CineCanvas,CinePalette and CineBlack are trademarks of Texas Instruments.
All other trademarks are the property of their respective owners.
CineLink,CineCanvas,CinePalette and CineBlack are trademarks of Texas Instruments.
All other trademarks are the property of their respective owners.
