This is the top of the page.
Displaying present location in the site.
  1. Home
  2. DLP Cinema Projector
  3. Series 2 DLP Cinema Projectors
  4. NC1200C
Main content starts here.

NC1200C

Highlights

Designed for auditoriums with screens up to 14meter/46-feet wide, NEC's NC1200C DLP cinema projector provides a mesmerizing movie-going experience. Delivering precise 2K (2048 x 1080) resolution, 3-D capabilities and high contrast images (2200:1), this model is easy to operate, extremely user-friendly and requires minimal maintenance.

  • 3-D content utilizes the projector's full 2K resolution using triple flash technology for smooth motion
  • Memory functions for lens position and lamp output
  • Lamp changes from the back of projector
  • Direct selection buttons for eight stored projector configurations
  • Auto lamp brightness control
  • Standard film projector lamps can be used (lamp adapter required)

Specifications

Model Name NC1200C
Projection system 3 chip DMD reflection method
DLP® Chip specifications
(size and resolution)
0.98 inches, 2048 x 1080
Brightness 9,700lm with USHIO DXL-20SN3 lamp
Supported Screen Sizes(maximum) Width 14m / 46ft *1
Contrast Ratio 2200:1 (full on/off)
Primary lens (option) NC-60LS12Z 1.2 to 1.8:1 zoom
NC-60LS14Z 1.4 to 2.05:1 zoom
NC-60LS16Z 1.59 to 2.53:1 zoom
NC-60LS19Z 1.9 to 3.25:1 zoom
NC-60LS24Z 2.4 to 3.9:1 zoom
NC-60LS39Z 3.9 to 6.52:1 zoom
Lens adjustment function Motorized focus, zoom, horizontal/vertical shift, light shutter (dowser) / Lens memory stores lens setting (shift/zoom/focus) / Range of shift is dependent on lens
Lamp Bulbs NEC certified digital Xenon lamp bulbs 2.0kW
Cooling Method
  • Liquid cooling inside, air cooling with dust-preventing electrostatic filter
  • Total thermal dissipation: 13000BTU
  • Projector exhaust: Top mounted
  • Demand of exhaust dust: 350CFM (10m³/min)
External Controls LAN port [RJ-45] x 1 / USB port [Type A] x 1 / Serial port (RS-232C) [D-sub(9-pin) x 1 / General Purpose I/O [D-sub (37-pin)] x 1 / General purpose I/O for 3D (D-sub [15-pin] x 1)
Input Terminals HD-SDI port [BNC] x 4 / DVI port [DVI-digital] x 2
Noise level Less than 62 dB
Power Supply For C1 connections *2 200 to 240V AC 50/60Hz single phase,
(Projector power supply + Lamp power supply)
For C2 connections *3 100 to 240V AC 50/60Hz single phase(Projector power supply)
200 to 240V AC 50/60Hz single phase (Lamp Power Supply)
Operating environment Operational temperatures: 50°F - 95°F / 10°C - 35°C   Humidity: 10% - 85% (non-condensing)
Storage temperatures: 14°F - 122°F / -10°C - 50°C    Humidity: 10% - 85% (non-condensing)
Regulations USA: UL60950 FCC Class A / Canada: CSA60950 ICES-003 Class A /
Europe: EN60950 EN55022 1988. Class A/EN55024-1998/EN61000-3-11/EN61000-3-12 (Marking: TUV-GS, CE) /
Oceania: EN60950 AS/NZS3548 Class A 1995/+A 1/2:1997 / Japan: J60950 VCCI Class A (Marking PSE, S-TUV) /
Asia: EN60950 CISPR Pub22 / Korea: K00022 Class A/K00024/K61000-3-11 (Marking IMC)
External Dimensions 27.6 x 39 x 19.8inch /700 x 990 x 503mm   Excluding lens, lens hood and exhaust stack. Including feet
Weight 203lbs. / 92kg (excluding lens and lamp bulb)
  • *1:Subject to installation conditions. Maximum screen size is under the conditions of 14-ft-L @ screen gain 1.8
  • *2:When the AC power to the projector power supply and the lamp power supply are provided by a single cable
  • *3:When the AC power to the projector power supply and the lamp power supply are provided by separate cables

Specifications are subject to change without prior notice.

External Diagram

External Diagram

Options

Interface

Equipped with expansion slots to support a multitude of diverse input formats.

  • Easy access to all important electronic boards from one side
  • Just one side panel to remove

NC1200C (NC-80LB01 built in)

NC1200C (NC-80LB01 built in)

Product configuration table(projector/signal input board/switcher)

2 slots system for 4 different boards NC-80MB01 NC-80LB01 NC-80DS01
3rd party vendors' IMB Signal Input board
-Enigma(for legacy server)
-Input terminals
Dual HDSDI x 2
DVI(HDCP) x 2
Signal Input board w/o Enigma
-Input terminals
Dual HDSDI x 2
DVI(HDCP) x 2
NC1200C
(NC-80LB01 built in)
option standard
Use with 2K legacy server
Use with IMB
  • ◎:Required   Ο:Option for showing alternative content

Availability of NC1200C-A/NC2000C-A/NC3200S-A is negotiable

Lenses (for 0.98" DC2K)

Lenses

Wide Converter Lens (x1.26)

NC-80LS13F

Use of the Wide Converter Lens requires the NC-AT02(installation stand)

Air Filters

others

  • NC-12RD01, RearDuctKit for NC1200C

Download

Top of this page