This is the top of the page.
Displaying present location in the site.
  1. Home
  2. Projector
  3. Peripheral Equipment
  4. NP01SW1 / NP01SW2 (HDBaseT™ Solution)
Main content starts here.

NP01SW1 / NP01SW2 (HDBaseT™ Solution)

Ultimate solution for large meeting rooms, classrooms, rental and staging

NP01SW1 / NP01SW2

HDBaseT HDMI MHL

NEC’s HDBaseT™ Selector and Receiver box is a smart solution that combines the advantages of HDBaseT™ and an easy-to-use control box. This solution offers uncompressed HD multimedia content, including 4K resolution, through a single network cable of up to 100 m*1.

  • *1:For 4K signals, up to 70 m

Based upon HDBaseT™ technology, the all new NP01SW1/2 is a cross-product solution allowing for an easy installation of a projector or public display through a single network cable connection. The ultimate flexibility of HDBaseT™ allows the transmission of uncompressed HD multimedia content over cable distances of up to 100 m, overcoming the traditional limitations of current cable technologies, reducing installation cost and therefore making this the ultimate solution for larger meeting rooms, classrooms, rental and staging, etc.
Additionally, with support for multiple input sources including HDMI®, MHL™ and MIC, the NP01SW1/2 lets you switch between devices with a click of a button. A simple and smart plug & play solution which can be connected directly to HDBaseT™ enabled devices. Even devices that are not HDBaseT™ compliant can easily be upgraded via the optional receiver box or the SB-07BC receiver.

Delivering Genuine Benefits

One cable solution for classrooms and meeting rooms

  • Signal transmission via single HDBaseT™ connection
  • Support for video, audio, device control and USB functions*2 via HDBaseT™

Easy to use

  • Easy to connect HDMI® and MHL™ supported devices
  • Easy to select input signals
  • Easy to control projector or public display

Cross-product solution

  • Direct connection with HDBaseT™ enabled projector and public display models (up to 100 m)
  • Non HDBaseT™ enabled models can be connected via HDBaseT™ Receiver box*3 or SB-07BC OPS module
  • *2: NEC’s USB-Display, USB-Viewer, IWB and Touch panel functions using USB backchannel in NP01SW2
  • *3:Up to 30 m

Specifications

MODEL NP01SW1
Interface Selector
NP01SW1
NP01SW2
Interface Selector + Receiver box
NP01SW2
Maximum resolutions (HDMI®) 4,096 × 2,160@30 Hz (4K)
1,920 × 1,080@50/60 Hz (1080p)
1,920 × 1,200@60 Hz (WUXGA@RB)
1,920 × 1,080@50/60 Hz (1080p)
Maximum pixel clock frequency up to 300 MHz up to 165 MHz
CONNECTIVITY  
  HDMI HDMI® in × 3 (HDMI3 incl. MHL™ support)
HDCP / Deep colour: 8/10/12-bit supported/3D/4K

audio input
LPCM sampling frequency: 32/44.1/48 kHz
(depend on display unit)
Selector : HDMI® in × 3 (HDMI3 incl. MHL™ support)
Receiver box: HDMI® out × 1
HDCP / Deep colour: 8/10/12-bit supported*1/3D*2

audio input
LPCM sampling frequency: 32/44.1/48 kHz
(depend on display unit)
Microphone (mini jack) Dynamic / Condenser microphone in × 1
USB*3 - USB 2.0 Type A × 1, USB 2.0 Type B × 1
For using NEC’s USB Display function,
Interactive White Board Kit,
Projector Viewer function,
Public display Touch panel function, etc.
LAN (RJ-45)*4 100Base-TX × 1 -
HDBaseT™ (RJ-45) For HDBaseT™ compliant products × 1 For connecting selector and receiver × 1
D-sub 9 pin For service × 1 Selector: for service × 1,
Receiver: for control × 1
IR For transmit remote control signals -
HDBaseT™ cable length (TMDS clock <225M Hz): up to 100 m
(TMDS clock >= 225M Hz): up to 70 m
CAT5e STP or higher (Recommended thickness AWG23)
up to 30 m
CAT6a STP or higher
(Recommended thickness AWG23)
POWER  
  Power consumption /
Stand-by
21 W / 0.1 W
Power requirement 100-240 V 50/60 Hz / 1.4 A
ENVIRONMENTAL CONDITIONS  
  Operating temperature and humidity 5°C to 40°C, 20% to 80% (without condensation)
Storage temperature and humidity -10°C to 50°C, 20% to 80% (without condensation)
PHYSCICAL SPECIFICATIONS  
  Net weight 1.4 kg 1.4 kg / 0.5 kg (receiver)
Gross weight 3.1 kg 3.9 kg
Net dimensions
(W × H × D)
285 × 64 × 187 mm 285 × 64 × 187mm / 126 × 52 × 119 mm (receiver)
Gross dimensions
(W × H × D)
354 × 175 × 255 mm 354 × 175 × 333 mm
ACCESSORIES (included) HDBaseT™ Selector,
AC adapter and power cord (1.5 m),
mounting kit, installation manual
HDBaseT™ Selector,
HDBaseT™ Receiver box,
AC adapter and power cord (1.5 m),
HDMI® cable (0.5 m),
RS232C cable (0.5 m), mounting kit,
installation manual
  • *1:1080p signal supports up to a 8-bit signal. 1080i, 720p and SDTV signals support up to a 12-bit signal.
  • *2:Supports 720p
  • *3: USB-A and USB-B ports cannot be used simultaneously.
  • *4: Not support for PoE

Device Connection Examples

Connecting to a projector or display equipped a HDBaseT™ port

Device_Connection_Examples_1

Connecting to a projector or display not equipped a HDBaseT™ port

Using the receiver box included with the NP01SW2

Device_Connection_Examples_2

Interface

Connection terminal section (inputs)

Connection terminal section

Operation button/indicator section

Operation button

Receiver box

Receiver box

  • HDBaseT and the HDBaseT Alliance logo are trademarks of the HDBaseT Alliance.
  • The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing Administrator, Inc. in the United States and other countries.
  • MHL and the MHL logo are trademarks, registered trademarks or service marks of MHL, LLC in the United States and/or other countries.
  • All other trademarks are the property of their respective owners.
  • The images in this brochure are samples.
  • All specifications are subject to change without notice.
    All rights reserved.
    Further trademark information

Top of this page