Optimal capabilities with the inclusion of lens shift, 1.7x zoom and centre lens with ceiling mount support.
Functions and Features
Features designed to make installation and maintenance easy.
Vertical lens shift mechanism to adjust the screen position
The projector is equipped with a lens shift function that can easily move the position of the projected image up or down by rotating a dial left or right, which means that the projector does not have to be moved. The focus can also be easily adjusted using a focus lever. The keystone correction function also makes it possible to move the range up or down ±30°.
The 1.7x zoom provides excellent flexibility for installation locations
The projector supports a 1.7x zoom to cover a wide throw distance. When combined with the lens shift mechanism, this makes ceiling mountings much easier.
Ceiling mounting kit for centre lenses (option)
When the projector is hung from the ceiling using the ceiling mounting kit (NP12CM), the lens centre of the projector is positioned at the centre of the mounting kit. This design makes it easy to determine the position of the projector.
A convenient test pattern for picture adjustment
You can check the screen projection condition while setting up the projector by using a test pattern (grid). The projector can be checked independently without having to connect image devices and output test images.
A geometric correction function to enable projection to a screen on an angle
The Geometric Correction Tool (GCT) of included Image Express Utility Lite software enables the projection of images from a computer to screen on an angle and to screens with complex shapes.
An optional cable cover is available
The optional cable cover (NP01CV) can hide cables even in situations where cables standout, such as with ceiling mountings.
Equipped with a large, maintenance-free filter
The large filter has the two-layer construction. It provides excellent dust protection and eliminates the need for regular cleaning. Just replace the filter when you change the lamp.
Advanced functionality designed for ease of operation
A USB display function for simple connection with a single USB cable
The USB display function lets you connect the projector and a computer with a standard USB cable to easily project computer screen images without computer cables.
“No-signal guidance” for easy cable connections
When there is no signal being input, the "No-signal guidance" display appears on the screen. Since you know in a glance where the cable should be inserted, your setup runs smoothly.
Crestron RoomView® support
This support provides unified management, including the ability to switch the power on and off for multiple projectors connected to a network.
Supports wired and wireless LAN (IEEE 802.11b/g/n) and various network controls
- For Microsoft Windows Media Connect, still and video (streaming) images are sent to projectors connected to the network. (Exceeding segments is not supported)
- Files in the shared folders of computers connected to the network can be viewed.*
- WPS (Wi-Fi Protected Setup) is supported. Projectors can be synchronized to an access point and infrastructure wireless LAN connections can be performed automatically.
- Includes an access point connection for improved stability of wireless LAN connections.
- Supports Windows Network Projector and PJ Link
**Model name of the wireless LAN unit varies depending on the country
where the unit is used (or to be used).
NP02LM1 : United States, Canada, Mexico, Taiwan, Brazil, Colombia
NP02LM2 : Europe, United Arab Emirates, Saudi Arabia, Oman, South Africa, Turkey, Ukraine, Egypt, Israel, Australia,New Zealand, Japan, Thailand, China, Hong Kong, Singapore, South Korea, Sri Lanka, Pakistan, Vietnam, India, Indonesia, Philippines, Peru, Chile, Argentina, Ecuador
NP02LM3 : Russia
Supports Virtual Remote Tool for operation of projectors from a computer
*Use the included Virtual Remote Tool software.
Added functions for the economical use of energy and the reduction of total cost of ownership
Equipped with an automatic Eco Mode to automatically control picture brightness
Eco Mode reduces light intensity automatically and imperceptibly when switching from white screens like charts or bright images to a dark screen or image. This function can reduce the power consumption by up to 24%. Both the projector and its remote are equipped with an Eco button for easy setting of Eco Mode.
Lengthen lamp lifetime
Using Eco Mode can increase the lamp lifetime to 5000 hours*.Furthermore, the low-energy design keeps power consumption to 0.2W(100-130V AC)/
0.4W(200-240V AC)during standby (Power-saving Mode), which helps reduce total cost of ownership.
*For P350X. This is not a guaranteed value.
The Carbon Meter lets you visually check the amount CO2 you reduced
Equipped with an abundance of handy functionality.
Built-in monaural speaker with a powerful 10 W output
The projector allows you to project images without a computer. Simply insert a USB
memory device loaded with image data directly into the projector. In addition to still
images in JPG, BMP, and PNG formats and video files in MPG and WMV formats,
PowerPoint* and Adobe® PDF* files can also be displayed without a computer.
*Limited to specific fonts, etc.
Basic DICOM mode allows simple display of medical images
The projector is preset with gradation
characteristics for medical images (similar to DICOM standards). You can display medical images stored as DICOM files for presentations at academic conferences, etc.
*Cannot be used for the display of images for medical diagnosis.
The Quick start function starts projection a mere 3 seconds after the power is switched on
Quick Cooling and Direct Power Off allow speedy clean-up and transfer after use
Designed for a low noise level of 29dB* (in Eco Mode) that doesn't disturb conferences or lessons
The RPM of the fan has been reduced and operation noises have been suppressed for a substantial reduction in noise.
The security function uses password settings and key locks to prevent unauthorized use
Throwing Distance and Screen Size
P420X/P350X (Aspect ratio 4:3)
|Wide||Tele||At Lens Shift 0||At Lens Shift Maximum|
P350W（Aspect ratio 16:10）
|Wide||Tele||At Lens Shift 0||At Lens Shift Maximum|
|LCD Panel||0.63 inch LCD with Micro Lens Array (Aspect Ratio 4:3)
Dichroic mirror separation-prism convergence system
|0.59 inch LCD with Micro Lens Array
(Aspect Ratio 16:10)
Dichroic mirror separation-prism
|Resolution *1||1024 x 768 pixels||1280 x 800 pixels|
|Lens||Manual Zoom / Manual Focus, Zoom ratio 1 to 1.7,
Throw ratio 1.3 to 2.2, F1.7-2.0, f=17.4-29.0mm
|Lens Shift||Vertical : Max +0.5||Vertical : Max +0.6|
(195W in ECO1)
(170W in ECO1)
(195W in ECO1)
|Lamp Life *2 (Eco Mode On / Eco Mode Off)||3500H / 3000H||5000H / 4000H||3500H / 3000H|
|Image Size (Projection Distance)||25 to 300 inch (0.64m to 13.8m)||25 to 300 inch
(0.68m to 14.58m)
|Colour Reproduction||10-bit signal processing (1.07 billion colours)
(VIEWER, NETWORK : 16.7 million colours)
|Light Output *3 *4||Eco Mode Off||4200 ANSI lumens||3500 ANSI lumens|
|Eco Mode On||ECO1 : 75%|
|Contrast Ratio (White / Black) *4||2000:1|
|Maximum Resolution||Analog||UXGA (1600 x 1200) with Advanced AccuBlend|
|Digital||HDTV (1920 x 1080) with Advanced AccuBlend|
|Scan Rate||Horizontal||15Hz to 100Hz (RGB : 24Hz to 85Hz)|
|Vertical||50Hz to 120Hz (HDMI : 50Hz to 85Hz)|
|Keystone Correction||Vertical||Manual Approx.±Max 30 degrees|
|Input Terminals||2 Computer Input||2 D-Sub Mini 15pin
||VGA, SVGA, XGA, XGA+, WXGA, WXGA+, SXGA, SXGA+, UXGA
RGB : 0.7Vp-p/75Ω
H/V Sync : 4.0Vp-p/TTL Level
|2 Stereo Mini Jack||Stereo L/R 0.5Vrms/22kΩ or over|
|2 D-Sub Mini 15pin
(Shared with Computer IN)
|Y : 1.0Vp-p/75Ω(with Sync)
Cb, Cr (Pb, Pr) : 0.7Vp-p/75Ω
Compatible signals : 480i, 480p, 720p, 1080i, 1080p /60Hz, 576i, 576p, 720p, 1080i/50Hz
DVD Progressive (50/60Hz)
|Audio Input is Shared with Computer IN||Same as Computer IN|
|1 HDMI Input||1 HDMI Type A||VGA, SVGA, XGA, WXGA, SXGA / 480p, 576p, 720p, 1080i, 1080p
DeepColor, LipSync, T.M.D.S. Specification, with H.D.C.P.
|HDMI support audio||Audio format : LPCM
Number of channel : 2ch
Sampling Frequency : 32/44.1/48kHz
Sampling bit : 16/20/24-bit
|1 S-Video Input||1 Mini DIN-4pin||Y : 1.0Vp-p/75Ω C : 0.286Vp-p/75Ω|
|1 RCA pin x 2||Stereo L (MONO)/R : 0.5Vrms/22kΩ or over|
|1 Video Input||1 RCA pin||Compatible signals : NTSC/NTSC4.43/PAL/PAL-N/PAL-M/PAL-60/SECAM
Compatible Video : 1.0Vp-p/75Ω
|Audio Input is Shared with S-Video||Same as S-Video|
|Output Terminals||1 RGB Output||1 D-Sub Mini 15pin||Only Computer 1 input can be output|
|1 Audio Output||1 Stereo Mini Jack||Stereo L/R 0.5Vrms/22kΩ or over, Selected Audio Signal can be output|
|USB Port||1 Type A||USB2.0 (for USB memory)|
|1Type B||USB2.0 (for PC)|
|Wired LAN Port||1 RJ-45||10BASE-T / 100BASE-TX|
|Wireless LAN (USB Port)||1 Type A||IEEE 802.11 b/g/n (Optional USB Wireless LAN Unit required)|
|Control Terminals||PC Control||1 D-sub 9pin||RS-232C|
|Built-In Speaker||10W Monaural|
|Quietness (Eco Mode On/ Eco Mode Off)||30dB / 36dB||29dB / 35dB||30dB / 36dB|
|Environment||Operational Temperatures||5°C to 40°C ([ECO MODE] selected automatically at 35°C to 40°C),
20% to 80% Humidity (Non-Condensing)
|Storage Temperatures||-10°C to 50°C, 20% to 80% Humidity (Non-Condensing)|
|Power Requirement||100 to 240V AC, 50Hz/60Hz|
|Input Current||3.9A - 1.7A||3.5A - 1.5A||3.9A - 1.7A|
|Power Consumption||Eco Mode Off||100 - 130V||358W||311W||358W|
|200 - 240V||343W||302W||343W|
|Eco1 Mode||100 - 130V||271W||239W||271W|
|200 - 240V||264W||236W||264W|
|Standby Mode||100 - 130V / 200 -240V||9W|
|Power-saving Mode||100 - 130V||0.2W|
|200 - 240V||0.4W|
|Calorific Value||100 - 130V
||1222BTU (Max)||1061BTU (Max)||1222BTU (Max)|
|200 - 240V||1170BTU (Max)||1030BTU (Max)||1170BTU (Max)|
|Dimensions (W x H x D)||398mm x 115mm x 282mm (Not Including Protrusions)|
|Accessories||Remote control, Batteries(AAA x 2), Computer cable, Power cord,
User's manual(CD-ROM), Quick setup guide, Important information
|Regulations||For United States||UL Approved (UL 60950-1), Meets FCC Class B Requirements|
|For Canada||C-UL Approved (CSA 60950-1), Meets DOC Canada Class B Requirements|
|For Asia/Oceania||IEC60950-1, Meets AS/NZS CISPR.22 Class B|
|For Korea||KC (safety : K60950-1, EMC : K00022, K00024, K61000-3-2)|
|For China||GB4943, GB9254, GB17625.1|
|For Russia||Gost R 60950-1, 51318.22, 51317.3.2. /3.3.|
|*1 :||Effective pixels are more than 99.99%.|
|*2 :||Lamp life is defined as the average time span for the brightness of the lamp to be reduced by half, it dose not refer to the warranty period for the lamp.|
|*3 :||This is the light output value (ANSI lumens) when the [PRESET] mode is set to [HIGH-BRIGHT]. If any other mode is selected as the [PRESET] mode, the light output value may drop slightly.|
|*4 :||Compliance with ISO21118-2005|
|All specifications are subject to change without notice.|
Remote Control (included accessory)
Ceiling mount kit
Wireless LAN unit