This is the top of the page.
Displaying present location in the site.
  1. Home
  2. Projector
  3. Installation
  4. P502HL-2 / P502WL-2
Main content starts here.

P502HL-2 / P502WL-2

The impressive compact 5,000 lumens projector with a state-of-the-art laser light source

Projector P502HL-2 / P502WL-2

DLP Medalion DLP SmartSource 3D

NaViSet MultiPresenter HDBaseT HDMI

Projector P502HL-2 / P502WL-2

The newest laser technology allows up to 20,000 hours maintenance free operation, ensuring high reliability and low cost of ownership.

Functions and Features

No More Lamp Replacements

Up to 20,000 hours* of maintenance-free operation possible due to the laser light source.

  • *Actual hours may vary depending on usage conditions.

Impressive Image Quality for Various Applications

The latest Texas Instruments DLP™ engine featuring BrilliantColor™ technology offers great 15,000:1 contrast for high brightness images up to 5,000 lumens at Full-HD and WXGA native resolutions.

DLP Medalion

Wide 1.7 × Optical Zoom and H/V Lens Shift

The wide 1.7 × optical zoom, horizontal / vertical lens shift and keystone correction allow flexible setting in various locations.

A Dustproof Design Supported by NEC’s Closed-loop Cooling System

A Dustproof Design

The projector has a dustproof design to prevent the staining of optical components from the ingress of dust and the deterioration of brightness and image quality. Heat within the dustproof units is exhausted from heat sinks, and the external air used for cooling does not directly contact the optical system, so the design offers both excellent dustproofing and cooling.

Tilt-free and Portrait Installation Support

Tilt-free and Portrait Installation Support

The projector can be rotated freely (360°) to point up or down depending on the installation requirements and can be rotated (along with the screen if necessary) to a vertical alignment so that portrait content can be viewed without black bars on the sides when landscape mode is used.

Compatible with Diverse Signal Sources

Built-in HDBaseT Support

Simplify your installations with HDBaseT, which is optimized for video applications and supports uncompressed Full HD digital video, audio, Ethernet, and various control signals. With only a single cable (up to 100 m) to run, infrastructure and labor costs are reduced, installations are significantly easier, and there is no cable clutter to manage. With uncompressed HD video support, images have never been more stunning. What is more, control signals are contained in the same cable.

HDBaseT

USB Viewer

This series projector can deliver a solution when you would prefer to leave your laptop computer behind for a presentation. Simply place your file onto a USB drive and plug it into the projector’s USB port. This allows you to display images stored as JPEGs from optional USB storage.

Dual HDMI Inputs

Among the P502HL-2 series wide selection of inputs is HDMI with HDCP for connecting to high-definition sources such as Blu-ray players, cable boxes, satellite receivers and personal computers.

HDMI

Advanced Networking Capabilities

Multi-screen Projection Function*1

The multi-screen projection function allows for the sharing of screens of multiple devices on various split-screen displays via a wireless or wired LAN. Display information from up to 50*2 PCs, tablet PCs, smart phones, and other network connected devices on a multi-screen display of up to 16 screens. Easily share screens and information regardless of device or operating system.

  • *1:Requires the optional wireless LAN module for wireless connection.
    PCs, Smart phones and tablets require the download and installation of our MultiPresenter software.
  • *2:The connection of 50 devices to the network requires construction of a wireless LAN environment, such as the use of a separate access point.

Multi-screen Projection Function

MultiPresenter

Web sharing function

Without the need for exclusive software, it enables you to share images and files between the projector and computers in the same network by accessing the web server of the projector utilizing the web browser.

Web sharing function

NaViSet Administrator 2

NaViSet Administrator 2

This software is an all-in-one remote support solution that runs from a central location and provides monitoring, asset management and control functionality for a majority of NEC display devices and Windows computers. It is ideal for multi-device installations over larger infrastructures.

Virtual Remote Tool

Virtual RemoteVirtual Remote

The utility software Virtual Remote Tool included on the supplied NEC Projector CD-ROM can display the Virtual Remote (or toolbar) on your computer screen. This allows you to turn the projector power on or off and select signals from a computer display cable (VGA), serial cable, or LAN connection.

Other Networking Capabilities

  • Simple Access Point
  • PC Control Utility 4.0 for Windows
  • PC Control Utility 5.0 for Mac
  • Miracast™
  • CRESTRON ROOMVIEW™ with emergency function
  • AMX BEACON
  • HTTP server
  • PJLink

Other Useful Features and Functions

  • Powerful 20-watt speaker provides the volume levels needed for large rooms
  • Virtually instant start up with the laser light source
  • Auto power-on via the HDMI 1, HDMI 2 and RGB (15-pin) input connectors when a signal is detected from a computer
  • Sleep timer can be set to automatically turn off the projector at set countdown times
  • Power management automatically turns off the projector when an incoming signal is not detected from any of the inputs
  • No-signal guidance for easy cable connections
  • Intuitive plug and play setup and operation
  • PC-based geometric correction and 3D Reform™ function
  • SmartSource™ 3D Ready
  • Includes a remote with the control ID registration function, which allows operation of multiple projectors with a single remote
  • Wall colour correction for vivid images even without a screen
  • DICOM simulation
  • Security bar / Kensington lock / Control panel lock and password lock
  • Low power consumption (0.36 W in 240 V AC stand-by mode) minimizes energy costs
  • The carbon metre lets you check the amount of CO2 you reduced by using ECO Mode

Terminals

Terminals

Specifications

Model Number NP-P502HL-2 NP-P502WL-2
Method Reflection by single DMD chip
Specifications of main parts  
  Main panel Size 0.65" (aspect ratio: 16:9) 0.65" (aspect ratio: 16:10)
Pixels*1 (1,920 dots × 1,080 lines) 1,024,000 (1,280 dots × 800 lines)
Projection lenses Zoom Manual (zoom ratio 1.7)
Focus Manual
Lens shifting Manual (H: ±25%, V: +62%, –0%) Manual (H: ±28%, V: +59%, –0%)
Light source Blue laser diode
Light source
(laser diode) Life*2
20,000 hours
Optical unit C/W type (DLP), colour separation by colour wheel; time-multiplexing colour wheel method
Light output*3*4 ECO mode off 5,000 lm
ECO 1 mode Approx. 80%
ECO 2 mode Approx. 50%
Contrast ratio*4 (all white / all black) 20,000:1 with dynamic contrast
Screen size 30 to 300 inches
Colour reproducibility 10-bit signal processing (approx. 1.07 billion colours)
Quietness (ECO2 / ECO1 / ECO mode off) 31 dB / 33 dB / 39 dB
Synchronization rate Horizontal 15 to 100 kHz (24 kHz or greater for RGB inputs)
Vertical 50 to 120 Hz
Max. display resolution
(horizontal × vertical)
Analogue: 1,920 × 1,200 (with Advanced AccuBlend) /
Digital: 1,920 × 1,080 (with Advanced AccuBlend)
Keystone correction Horizontal Manual (approx. ±25 degrees)
Vertical Manual (approx. ±30 degrees)
Input / output connectors  
  Computer input Mini D-Sub 15-pin × 1
  Audio input Stereo mini jack × 1
HDMI® input TypeA 19-pin HDMI® connector (HDCP, audio) × 2
HDBaseT™ RJ45 (Ethernet 100Base-TX / HDBaseT, audio) × 1
Video input RCA × 1
  Audio input RCA × 2 (L / R)
Computer output Mini D-Sub 15-pin × 1
Audio output Stereo mini jack × 1
PC control D-Sub 9-pin × 1
USB port Type A for USB memory × 1, Type B for service × 1
Ethernet port RJ-45 (10 / 100Base-TX) × 1, W-LAN (USB type A) × 1 for wireless LAN unit
3D SYNC Synchronized signal output for 3D use × 1
Built-in speaker 20 W monaural × 1
Usage environment Operating temperature: 5 to 40°C*5, operating humidity: 20 to 80% (with no condensation)
Storage temperature: –10 to 50°C, storage humidity: 20 to 80% (with no condensation)
Operating altitude: 0 to 2,600 m (1700 to 2,600 m: Set [FAN MODE] to [HIGH])
Power supply 100 – 240 V AC, 50/60 Hz
Power consumption ECO mode off 464 W (100 – 130 V ) / 442 W (200 – 240 V )
ECO1 362 W (100 – 130 V ) / 347 W (200 – 240 V )
ECO2 236 W (100 – 130 V ) / 231 W (200 – 240 V )
STANDBY (NORMAL) Less than 0.36 W
STANDBY (NETWORK) Less than 2.3 W
Rated input current 5.7 – 2.3 A
Dimensions (W × H × D) 469 × 137 × 365 mm (net dimensions, not including protruding parts)
Weight 8.7 kg (net weight)
  • *1:Effective pixels are more than 99.99%.
  • *2:Time at which the laser light source is at half brightness; not a guarantee time.
  • *3:Light output value when the [PRESET] mode is set to [HIGH-BRIGHT].
  • *4:Compliant with ISO21118-2005.
  • *5:When surrounding temperature is 35 – 40°C, [PRESET] becomes [ECO] mode automatically.

These specifications and the product’s design are subject to change without notice.

Throw distance and screen size

Throw distance and screen size

P502HL-2 Full HD (Aspect ratio 16:9)

Screen
size
Screen width
(cm)
Screen height
(cm)
Throw distance L (m) Height H (cm)
Wide Tele 0% V  – 62% V
30" 66.4 37.4 0.79 1.39 −18.7  –  4.3
40" 88.6 49.8 1.07 1.86 −24.9  –  5.8
50" 110.7 62.3 1.34 2.34 −31.1  –  7.2
60" 132.8 74.7 1.62 2.81 −37.4  –  8.7
80" 177.1 99.6 2.17 3.76 −49.8  –  11.6
100" 221.4 124.5 2.72 4.71 −62.3  –  14.5
120" 265.7 149.4 3.28 5.66 −74.7  –  17.4
150" 332.1 186.8 4.11 7.08 −93.4  –  21.7
200" 442.8 249.1 5.49 9.45 −124.5  –  28.9
250" 553.4 311.3 6.87 11.82 −155.7  –  36.2
300" 664.1 373.6 8.25 14.19 −186.8  –  43.4

P502WL-2 WXGA (Aspe ct ratio 16:10)

Screen
size
Screen width
(cm)
Screen height
(cm)
Throw distance L (m) Height H (cm)
Wide Tele 0% V  – 59% V
30" 64.6 40.4 0.81 1.42 −20.2  –  3.4
40" 86.2 53.8 1.09 1.9 −26.9  –  4.6
50" 107.7 67.3 1.37 2.39 −33.7  –  5.7
60" 129.2 80.8 1.66 2.87 −40.4  –  6.9
80" 172.3 107.7 2.22 3.84 −53.8  –  9.2
100" 215.4 134.6 2.78 4.81 −67.3  –  11.5
120" 258.5 161.5 3.35 5.78 −80.8  –  13.8
150" 323.1 201.9 4.19 7.23 −101.0  –  17.2
200" 430.8 269.2 5.6 9.65 −134.6  –  23
250" 538.5 336.5 7.01 12.08 −168.3  –  28.7
300" 646.2 403.9 8.43 14.5 −201.9  –  34.5
  • *Stated projection distances are standard values.
  • *The values in the tables are design values and may vary.

Cabinet dimensions

Dimensions

Accessories

Remote control (included accessory)

Options

Wireless LAN unit*1
NP05LM1-5*2

Cable cover
NP08CV

  • *This product is classified as Class 2 of IEC60825-1 Second edition 2007-03. The laser module is equipped in this product.
    DO NOT STARE INTO THE LENS WHILE IN USE
  • *The projector can be unplugged during its cool down period after it is turned off. Parts of the projector will become heated during operation.
    Use caution when picking up the projector immediately after it has been operating.
  • *Use caution when putting the projector in the soft case immediately after the projector has been operating.The projector cabinet is hot.

NEC is a registered trademark of NEC Corporation.
MultiPresenter and Virtual Remote are the trademark of NEC Display Solutions, Ltd. in Japan, and other countries.
NaViSet is a trademark or registered trademark of NEC Display Solutions, Ltd. in Japan, the United States and other countries.
DLP and the DLP logo are registered trademarks or trademarks of Texas Instruments. BrilliantColor™ is a trademark of Texas Instruments.
SmartSource™ 3D is a trademark of Texas Instruments. Blu-ray is a trademark of the Blu-ray Disc Association.
The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing Administrator, Inc. in the United States and other countries.
HDBaseT and the HDBaseT Alliance logo are trademarks of the HDBaseT Alliance.
iOS is a trademark or registered trademark of Cisco in the United States and other countries and is used under license.
Android is a trademark of Google Inc.
Miracast is a trademark or registered trademark of Wi-Fi Alliance.
CRESTRON and CRESTRON ROOMVIEW are trademarks or registered trademarks of Crestron Electronics, Inc.
AMX is a trademark or registered trademark of AMX LLC in the United States and other countries.
Trademark PJLink is a trademark applied for trademark right in the United States of America and other countries.
All other trademarks are the property of their respective owners. The images in this brochure are samples.
Further trademark information

Top of this page