GT6000
The dual lamp mode system provides superior brightness and many hours of continuous operation
The GT6000 supports SXGA+ (1400x1050) real, and outstanding brightness of 5,300 ANSI lumens is achieved.
By introducing the 1.4' Poly Silicon TFT LCD panel (SXGA+ (1400x1050) real) with the newly developed Micro Lens Array (MLA) and the 275 W DC dual lamp mode, outstanding brightness of 5,300 ANSI lumens (using the GT20ZL lens) is achieved.
It is also possible to provide high brightness projection at a maximum of 10,600 ANSI lumens through a stack configuration with two projectors.
With Advanced AccuBlend, NEC's unique resolution technology, images can be displayed in higher order resolutions up to UXGA (1600 x 1200 pixels).
New LSIs for sharper, more vivid image quality
This projector uses two new NEC LSIs. The first is a 10-bit video decoder LSI that significantly lowers cross colours and cross luminance caused by three dimensional Y/C separation (with NTSC signals), and the second provides a Contrast Enhancement function that uses the characteristics of the human eye to achieve picture quality with a greater feeling of contrast. For optimum quality with movies and video, the projector also incorporates a high performance LSI for de-interlacing using Faroudja DCDiTM technology. The result is reproduction of all images with extremely high contrast (700:1) and overall quality.
The long life lamp (GT60LPS) running in Eco mode provides many hours of continuous operation.
The long life lamp can be used in conjunction with either of the dual lamp modes: Normal mode and Eco Mode.In the Eco Mode or with the long-life lamp, the projector affords many hours of continuous operation and drastically reduces the cost and labour of replacing lamps. This projector is the best choice for the diverse needs of graphic artists or for controlling and monitoring where the projector will be in use for many hours - mini theatres, halls, art galleries, museums, libraries and video libraries - anywhere high definition images with outstanding brightness are required.
3D Reform simply corrects distorted images projected from an angled position*
The 3D Reform function, using the newly developed ASIC which implements NEC's unique image conversion technology, corrects 3D distortions, not obtainable with four direction trapezoid correction, to project more beautiful images. Distorted images can be corrected by clicking the four corners of the image on the screen with a USB mouse, operating the remote controller, or the button on the main unit.
Trapezoidal distortion can be corrected vertically +/- 40 degrees and horizontally +/- 30 degrees. Since the correction can be made in one-degree increments, precision image correction is possible.
Since the corrected data can be stored, you can display square images anytime in places, such as a conference room, where the projector is permanently installed.
With the Geometric Correction function capable of projecting square images onto cylindrical or spherical screens, applications for large-sized projection are expanded.
* Under some environmental conditions, the projector may not set up.
Electric Zoom and Focus, Power Driven Lens Shift function (in both vertical and horizontal directions) is standard and five types of optional lenses are available.
In addition to the Zoom and Focus function for adjusting the zoom and focus of the projection lens, the Power Driven Lens Shift function adjusts the position of the projected image without changing the position of the projector. Since the lenses can be shifted in both the vertical and horizontal directions and the lens position for the respective Zoom, Focus, and Lens shift input signals can be individually stored in the memory, projector installation is more flexible.
* The Power Driven Lens Shift function is not available for the GT10RLB lens and the GT06RLB lens.
Nine types of optional lenses from the short focus type to the long focus type are available. Choose the optimum lens according to the installation location of the projector, such as a conference room, lecture hall, concert hall, or event venue.
* The amount of shift and brightness may vary depending on the lens used.
Maximum Possible Range
Model GT12ZLB GT13ZLB GT19ZLB GT20ZL GT24ZLB GT34ZLB GT48ZLB
Lens Shift A ±0.5V ±0.32V ±0.39V ±0.5V ±0.39V ±0.39V ±0.5V
B ±0.32H ±0.19H ±0.24H ±0.32H ±0.24H ±0.24H ±0.32H
H : width of projected image, V : height of projected image
Range of Lens Shift
Model GT12ZLB GT13ZLB GT19ZLB GT20ZL GT24ZLB GT34ZLB GT48ZLB
Vertical 18.59° to 12.36° 12.05° to 9.22° 10.39° to 7.49° 11.30° to 8.18° 8.06° to 5.14° 5.33° to 3.42° 4.54° to 2.96°
Horizontal 16.02° to 10.60° 9.59° to 7.32° 8.56° to 6.15° 9.67° to 7.00° 6.63° to 4.22° 3.29° to 2.81° 3.88° to 2.53°
If the lens shifts in both a vertical and horizontal direction, there are some directions (the four corners) where the lens shifting angle will be smaller than this. The respective values are design values and may contain errors within +/- 5%.
This supports wireless and wired LAN. The lamp lifetime and error messages will be sent via e-mail notification.
The LAN port (RJ-45) is standard. By using a commercially available wired LAN cable (Ethernet cable), collectively manage and control the projector from your PC through a network. If you install the optional wireless LAN card (SWL-2100N) in the PJ card slot on the projector and set up a network connection, you can project PC images supporting wireless LAN without using a video signal cable. For a conference using multiple PCs, it is not necessary to connect cables, and the speaker does not need to move. Furthermore, the Mail Notification Function transmits information about the lamp lifetime or error messages from the projector to three destinations for effective maintenance services.
The Mail Notification Function and the HTTP Server Function are not available for Macintosh computers.
<For details of the LAN connection>
USB memory and a USB memory card reader can be used.
A flash memory card and USB memory can be connected to project images stored in USB memory or used as a protection key. Furthermore, by connecting a commercially available USB memory card reader, you can handle data in various kinds of memory cards or use various kinds of memory cards as a protection key.
For available USB memory and USB memory cards, please click here.
A variety of input ports and a comprehensive array of system control interfaces
This projector supports input signals including BNC, DVI-D, analogue RGB, component, S-video, and composite, as well as the high definition standards of BS broadcasting (D1 to D5). For system control, it is possible to configure the system to the users needs including operation and control of the status of the projector through USB, the link mode, and wireless and wired LAN (RJ-45) as well as RS-232C.
Furthermore, two optional slots accommodate optional SDI and RGB boards for superior system expandability.
Seamless Switch
Seamless Switch provides image transitions when switching the signal source.Select from three options: Wipe overlays the image in any direction from side to side or top to bottom; Box in contracts the image from the edge to the center; and Box out expands the image from the center to the edge.Select the transition speed from the three options of High, Standard, and Low.
 
Specifications
  GT6000
LCD Panel *1 1.4" (1,400x1,050) p-Si TFT LCD x 3 With Micro Lens Array
Lens Motorized Zoom / Focus / Shift ±0.32 H / ±0.5 V (GT20ZL)
Lamp 275 W DC x 2 (Normal Mode)
Lamp Life *2 2000 H (Normal Mode) / 3000 H (Eco Mode)
Image Size 40 - 300" (with GT20ZL)
Light Output Normal Mode 5300 ANSI lumens (with GT20ZL)
Eco Mode 4100 ANSI lumens (with GT20ZL)
Resolution Native Resolution SXGA+ (1,400X1,050)
Maximum Resolution UXGA (1,600X1,200) With Advanced AccuBlend
Contrast Ratio 700 : 1
Optical Unit Light Gate, Integrator, XDP
Synchronization
Range
Horizontal 15 - 100 kHz (RGB : 24 KHz or over)
Vertical 48 - 120 Hz
Video Bandwidth RGB : 100 MHz
Colour Reproduction Full Colour, 16.7Million Colours Simultaneously
Input
Terminals
1 DVI Digital Input 1 DVI-D RGB (Digital) T.M.D.S Specification
Max Resolution : XGA@60Hz
1 Stereo Mini Jack Stereo L / R 0.5Vrms / 22kΩ or over
RGB1 Input 5 BNC RGBHV (Analogue) VGA, SVGA, XGA, SXGA,
UXGA (With Advanced AccuBlend)
RGB 0.7 Vp-p / 75Ω Positive Polarity
H/V Sync 4.0 Vp-p / TTL Polarity
Composite Sync 4.0 Vp-p / TTL Level
Sync on G 0.3 Vp-p / 75Ω Negative Polarity
2 RCA pin Stereo L (Mono) / R 0.5Vrms / 22k Ω or over
RGB2 Input 1 D-Sub Mini 15pin RGBHV (Analogue) VGA, SVGA, XGA, SXGA,
UXGA (With Advanced AccuBlend)
RGB 0.7 Vp-p / 75 Ω Positive Polarity
H/V Sync 4.0 Vp-p / TTL Polarity
Composite Sync 4.0 Vp-p / TTL Level
Sync on G 0.3 Vp-p / 75 Ω Negative Polarity
1 Stereo Mini Jack Stereo L / R 0.5Vrms / 22k Ω or over
2 Component Input
(Sharing With
RGB1 & RGB2)
3 BNC (Sharing With RGB1)
1 D-Sub Mini 15pin
(Sharing With RGB2)
Y 1.0 Vp-p / 75 Ω Positive Polarity
Cb · Cr (Pb · Pr) 0.7 Vp-p / 75 Ω Positive Polarity
1125p (1080p), 1125i (1080i), 750p (720p),
625p (576p), 525p (480p), 525i (480i), / 60Hz
1080i / 50Hz, Progressive PAL-scan / 50Hz
DVD Component Video Signal (15kHz)
2 RCA pin (Sharing With RGB1) Stereo L (Mono) / R 0.5Vrms / 22k Ω or over
1 Stereo Mini Jack (Sharing With RGB2) Stereo L / R
1 Video Input 1 BNC Composite Video NTSC / NTSC4.43 / PAL /
PAL-60 / SECAM
1.0 Vp-p / 75 Ω
2 RCA pin Stereo L (Mono) / R 0.5Vrms / 22k Ω or over
1 S-Video Input 1 Mini DIN-4pin Y 1.0 Vp-p / 75 Ω
C 0.286 Vp-p / 75 Ω
2 RCA pin Stereo L (Mono) / R 0.5Vrms / 22k Ω or over
2 Option Slots 2 Option board RGB (BNC x 5)
SDI (HD & SD)
2 PC-Card Slots PC-Card PCMCIA type II
LAN Port 1 RJ-45
Output
Terminals
RGB Output 1 D-Sub Mini 15pin
AUDIO Output 2 RCA pin Stereo (L / R) Variable Audio
Built-In Speaker 5W + 5W
Control
Terminals
USB Port 1 A Type
USB Port 1 B Type Remote Mouse
Ex.Control 1 D-Sub Mini 15pin External Control
Remote Control Input 1 Stereo Mini Jack External Control
Remote Control Output 1 Stereo Mini Jack External Control
PC Control Input 1 D-Sub Mini 9pin RS-232C
PC Control Output 1 D-Sub Mini 9pin RS-232C
SC.Trigger 1 Stereo Mini Jack 12V 100mA
Keystone Correction H max ± 30 degrees : V max ± 40 degrees
Environment Operational Temperatures 32°- 95°F (0° To 35°C), 20 - 80% Humidity (Non-Condensing)
Storage Temperatures 14°- 122°F (-10° To 50°C), 20 - 80% Humidity (Non-Condensing)
Power Requirement 100 - 120 V AC / 200 - 240 V AC, 50 Hz / 60 Hz
Power Consumption 800 W (Lamp Normal Mode) 660 W (Lamp Eco Mode) 1 W (Standby)
Input Current 8.0 A (100 - 120 V AC) / 4.0 A (200 - 240 V AC)
Regulations UL Approved (UL 1950, CSA 950)
Meets DOC Canada Class B requirements
Meets FCC Class B requirements
Meets AS / NZS 3548 Class B
Meets EMC Directive (EN 55022 : 1998, EN 55024-1998, EN 61000-3-2, EN 61000-3-3)
Meets Low Voltage Directive (EN 60950, TUV GS Approved)
Dimensions (WxHxD) 518 mm x 242 mm x 548 mm (Not Including Protrusions)
Net Weight 18.4Kg (Not Including Lens)
*1 : LCD panel technology consists of fine picture cells with more than 99.99% of the cells being active.
*2 : Lamp life is defined as the average time span for the brightness of the lamp to be reduced by half, it does not refer to the warranty period for the lamp.
All specifications are subject to change without notice.
Throwing Distance and Image Size
Dimensions
Terminals
Option Lens
Model GT06RLB GT10RLB GT12ZLB*1 GT13ZLB*1 GT19ZLB*2
Lens type Wide short focus fixed lens Short focus
fixed lens
Short focus
zoom lens
Short focus
zoom lens
Medium range
zoom lens
Zoom/Focus manual (Focus Only) Power
(Focus Only)
Power Power Power
Zoom Ratio 0.6:1 1:1 1.2-1.7:1 1.2-1.5:1 1.7-2.2:1
Lens
Shift*2
Vertical - - ±0.5V*4 ±0.32V*4 ±0.39V*4
Horizontal - - ±0.32H*4 ±0.19H*4 ±0.24H*4
Weight 4.0kg 1.7kg 3.3kg 2.0kg 1.7kg
Screen Size 40-120" 40-250" 40-300" 40-300" 40-300"
Brightness 2-Lamp Mode Normal Mode 4200 ANSI 4200 ANSI 4400 ANSI 4400 ANSI 4800 ANSI
Eco Mode 3300
3300
3400 3400 3700
Long Life Lamp (GT60LPS) 2100 2100 2200 2200 2400
1-Lamp Mode Normal Mode 2100 2100 - - 2400
Eco Mode 1600 1600 - - 1800
Long Life Lamp (GT60LPS) 1100 1100 - - 1200
Model GT20ZL*2 GT24ZLB*2 GT34ZLB*2 GT48ZLB*2
Lens type Medium range
zoom lens
Medium range
zoom lens
Long focus
zoom lens
Long focus
zoom lens
Zoom/Focus Power Power Power Power
Zoom Ratio 2.0-2.6:1 2.2-3.2:1 3.2-4.8:1 4.8-7.1:1
Lens
Shift*2
Vertical ±0.5V*4 ±0.39V*4 ±0.39V*4 ±0.5V*4
Horizontal ±0.32H*4 ±0.24H*4 ±0.24H*4 ±0.32H*4
Weight 2.0kg 1.8kg 1.7kg 2.6kg
Screen Size 40-300" 60-400" 80-500" 80-500"
Brightness 2-Lamp Mode Normal Mode 5300 ANSI 4200 ANSI 4000 ANSI 4600 ANSI
Eco Mode 4100 3300 3100 3600
Long Life Lamp (GT60LPS) 2600 2100 2000 2300
1-Lamp Mode Normal Mode 2600 2100 2000 2300
Eco Mode 2100 1600 1500 1800
Long Life Lamp (GT60LPS) 1300 1100 1000 1200
*1: GT12ZLB / GT13ZLB cannot be used in the 1-lamp mode.
*2: When using the projector with the lens, it is recommended to select "Dual" in the Lamp Settings menu.
This will provide the best performance when operating the projector.
*3: If the lens shifts in both a vertical and horizontal direction, there are some directions (the four corners) where the lens shifting angle will be smaller than this. The respective values are design values and may contain errors within +/- 5%.
*4: H : width of projected image, V : height of projected image
GT06RLB will be available in June 2004. GT12RLB will be available in August 2004.
Optional Accessories
Replacement Lamp (GT60LP) [Standard]
Replacement Lamp (GT60LPS) [Long Life]
Ceiling Mounting Kit (GT60CM)
SDI Interface Board (MM-SDI) *1
RGB Interface Board (MM-RGB)*2
*1: The MM-SDI is an SDI board with 3 x BNC connectors for an expansion slot on the projector. The MM-SDI board allows for connecting the projector with a commercial type digital VTR (D5-VTR) compatible with digital serial component signals.
*2: The MM-RGB is an RGB board with 5 x BNC connectors for an expansion slot on the projector.
 
Model codes, specifications and available options may differ by region.
For detailed information, please contact the NEC sales company or dealer in your area.

Faroudja is a registered trademark of Faroudja Laboratories,Inc. DCDi is a Trademark of Faroudja Laboratories,Inc.All brand and product names are registered trademarks of their respective holders. Further trademark information