Functions and Features
TCO Certified makes it easy to choose a projector that gives the best possible image quality for your needs and at the same time has minimal environmental impacts.
A new measurement called "TCO Image Size" specifies the maximum projected size for excellent image quality.
NEC NP510W and NP410W are the projectors to be awarded the TCO Certification (TCO Projector 1.0).
For more details about TCO Certified Projectors: http://www.tcodevelopment.com/pls/nvp/Document.show?cid=4146&mid=562
User-friendly operability and superior flexibility in installation and projection
Quick start & Direct Power Off
Your projector is setup and ready to display your presentation about 4 seconds after powering on, with the NEC Quick Start function.
The Quick Power Off function stops the cooling fan immediately after turning off the power to the projector, which makes it possible to remove the projector quickly. For a rapid shut down, the projector can be turned off without powering off the projector using the Direct Power Off function and a power strip equipped with a switch and breaker.
The ECO function saves power and reduces CO2 emissions
Carbon meter for visualizing ecology
The projector employs the Carbon Meter indicating the reduced amount of CO2 emissions in Eco Mode. Visually confirm the numerical value indicating the reduction in CO2 emissions in comparison with Normal Mode operation.
Variety of functions for user-friendly operation on different occasions
By using passwords, the projector cannot be used by unauthorized persons. It is impossible to project an image unless the proper password is entered.
Since the main unit has a security chain opening, unauthorized removal of the projector is prevented by inserting the security cable or wire commercially available into the opening.
Built-in 7W speaker for integrated audio solutions
The built-in 7W monaural speaker on the main unit outputs audio from computer, video, and S-video inputs.
Multiple input/output terminals
Multiple input/output terminals include analogue RGB, DVI-I(digital), video, and S-video. By using the DVI-RGB adapter, analogue RGB signals can be connected from two computers.
Auto Vertical Keystone Correction
|The projector will automatically detect and correct vertical inclination and trapezoidal distortions. The angle is adjustable vertically within a range of about +/-30 degrees from the projected angle.|
Wall Colour Correction for vivid images even without a screen
Without a screen, projected images are affected because of the colour of the wall or blackboard you are projecting on to. The built-in colour correction for projecting images on a coloured wall or blackboard in this projector means that the colour tones of the projected image is approximate to those that are projected on to a white screen. The following nine colour options are available : whiteboard, blackboard, blackboard (grey), light yellow, light green, light blue, sky blue, light rose, and pink.
*Selecting [WHITEBOARD] reduces lamp brightness.
Wired LAN Connectivity
Connect a LAN cable to the LAN port (RJ-45) on the main unit of the projector to control the projector from a remote PC via the network; for instance, use the PC to turn the power to the projector on and off or switch input signals.
WXGA panel for wide-format images
The projector´s WXGA panel (1280 x 800) displays the same wide- format WXGA resolution images such as laptop computers and DVDs.
One-touch operation switches the remote controller into Eco mode
Virtual Remote Function is easy and convenient to set up on the projector
Virtual Remote Function
The included Virtual Remote Tool utility software allows to operate the power on/off or switch inputs on the projector from your PC by using the supplied VGA signal cable. The Easy Setup function is employed in addition to the ordinary Virtual Remote Tool. With this function, projector can be set up simply by following the instructions shown on the screen for easy setup.
Click with our website to download the Virtual Remote Tool utility and the PC Control Utility Pro .
Throwing Distance and Screen Size
(Aspect Ratio 16:10)
|Throwing Distance (m)||Bottom
NEC Projector Throw Distance Calculator : NP510W/NP410W
|LCD Panel||3LCD, 3-chip optical engine / Dichroic mirror separation-prism convergence system|
|0.59 inch LCD with Micro Lens Array
(Aspect Ratio 16:10)
|Resolution *1||1280 × 800 pixels|
|Lens||Manual Zoom / Focus, Zoom ratio 1-1.2,
Throw ratio 1.5-1.8:1, F1.7-2.0, f=19.8-23.7mm
|Lamp (Eco Mode / Normal Mode)||170W / 230W AC|
|Lamp Life *2 (Eco Mode / Normal Mode)||5000H / 4000H|
|Image Size (Projection Distance)||21 to 300 inches (0.8m to 11.9m)|
|Colour Reproduction||16.7Million Colours Simultaneously, Full Colour|
|Light Output *3 *4||Normal Mode||3000 ANSI lumens||2600 ANSI lumens|
|Eco Mode||Approx.70% of Normal Mode|
|Contrast Ratio (White / Black) *4||500 : 1||400:1|
|Maximum Resolution||Analog||UXGA (1600 x 1200) with Advanced AccuBlend|
|Digital||SXGA+(1400 x 1050) with Advanced AccuBlend|
|Scan Rate||Horizontal||15kHz to 100kHz (RGB : 24kHz or over)|
|Vertical||50Hz to 120Hz|
|Keystone Correction||Vertical||Auto/Manual Approx.± Max 30 degrees|
|Input Terminals||2 Computer Input||1 D-Sub Mini 15pin
(Computer 1 IN)
|VGA, SVGA, XGA, WXGA, WXGA+, SXGA, SXGA+, UXGA / 480i, 480p, 576i, 576p, 720p, 1080i
RGB : 0.7Vp-p/75Ω , H/V Sync : 4.0Vp-p/TTL Level , Composite Sync : 4.0Vp-p/TTL Level Positive/Negative Polarity, Sync on G : 1.0Vp-p/75Ω(with Sync) Negative Polarity
(Computer 2 IN)
|DVI-I connector (29pins) DVI digital (with H.D.C.P*5), DVI analog Maximum resolution SXGA/60Hz,
Specification is same as Computer 1 IN
|2 Stereo Mini Jack||Stereo L/R 0.5Vrms/22kΩ or over|
|1 D-Sub Mini 15pin
(Sharing with Computer 1 IN)
|Y:1.0Vp-p/75Ω(with Sync), Cb/Cr(Pb/Pr):0.7Vp-p/75Ω,
DTV : 480i, 480p, 720p, 1080i/60Hz, 576i, 576p, 1080i/50Hz, DVD Progressive (50/60Hz)
|Audio input is sharing with computer 1 IN||Specification is same as Computer 1 IN|
|S-Video Input||1 Mini DIN-4pin||Y:1.0Vp-p/75Ω, C:0.286Vp-p/75Ω|
|1 RCA pin x 2||Stereo L (MONO)/R : 0.5Vrms/22kΩ or over|
|Video Input||1 RCA pin||NTSC/NTSC4.43/PAL/PAL-N/PAL-M/PAL-60/SECAM|
|Audio Input is Sharing with S-Video||Specification is same as S-Video IN|
|Output Terminals||RGB Output||1 D-Sub Mini 15pin||Only Computer 1 In can be output|
|Audio Output||1 Stereo Mini Jack||Stereo L/R 0.5Vrms/22kΩ or over, Selected Audio Signal input from Computer1(Component), Computer2, S-Video or Video|
|LAN Port||RJ - 45||100BASE-TX/10BASE-T|
|Control Terminals||PC Control||1 D-sub 9pin||RS-232C|
|Built-In Speaker||7W Monaural|
|Quietness (Eco Mode / Normal Mode)||29dB / 35dB|
|Environment||Operational Temperatures||5°C to 40°C (Eco Mode selected automatically at 35°C to 40°C), 20% to 80% Humidity (Non-Condensing)|
|Storage Temperatures||-10°C to 50°C, 20% to 80% Humidity (Non-Condensing)|
|Power Requirement||100 to 240V AC, 50Hz/60Hz
(G version : 200 to 240V AC, 50Hz/60Hz)
|Input Current||100 - 130V||3.8 / 1.5A|
|200 - 240V||1.8A|
|Power Consumption||Normal Mode||100 - 130V||312W|
|200 - 240V||294W|
|Eco Mode||100 - 130V||237W|
|200 - 240V||228W|
|Standby Mode||100 - 130V||10W|
|200 - 240V||10W|
|Power-saving Mode||100 - 130V||0.6W|
|200 - 240V||0.7W|
|Heat Dissipation||100 - 130V||1065BTU (Max)|
|200 - 240V||1003BTU (Max)|
|Dimensions (W x H x D) (Not Including Protrusions)||308mm x 93.5mm x 262mm|
|Accessories||Lens cap, Remote control, Batteries(AAA x 2), VGA signal cable(1.8m), Power cable, Soft Case, DVI to VGA adapter, User's manual(CD-ROM), Quick setup guide|
|Regulations||UL/C-UL Approved (UL 60950-1, CSA 60950-1)
Meets DOC Canada Class B requirements
Meets FCC Class B requirements
Meets AS/NZS CISPR.22 Class B
Meets EMC Directive (EN55022, EN55024, EN61000-3-2, EN61000-3-3)
Meets Low Voltage Directive (EN60950-1, TÜV GS Approved)
|*1 :||Effective pixels are more than 99.99%.|
|*2 :||Lamp life is defined as the average time span for the brightness of the lamp to be reduced by half, it dose not refer to the warranty period for the lamp.|
|*3 :||This is the light output value (ANSI lumens) when the [PRESET] mode is set to [HIGH-BRIGHT]. If any other mode is selected as the [PRESET] mode, the light output value may drop slightly.|
|*4 :||Compliance with ISO21118-2005|
|*5 :||What is HDCP/HDCP technology?
HDCP is an acronym for High-bandwidth Digital Content Protection. High bandwidth Digital Content Protection (HDCP) is a system for preventing illegal copying of video data sent over a Digital Visual Interface (DVI). If you are unable to view material via the DVI input, this does not necessarily mean the projector is not functioning properly. With the implementation of HDCP, there may be cases in which certain content is protected with HDCP and might not be displayed due to the decision/intention of the HDCP community (Digital Content Protection, LLC).
|All specifications are subject to change without notice.|