Beginning of this page.
Jump to main content.

Please note that JavaScript and style sheet are used in this website,
Due to unadaptability of the style sheet with the browser used in your computer, pages may not look as original.
Even in such a case, however, the contents can be used safely.

NEC NEC Display Solutions, Ltd.
Site menu starts here.
Skip site menu.
End of site menu.
Displaying present location in the site.
> Projector Lineup > MT1065 > The method to confirm the version of the MT1060/1065 firmware
Menu starts here.
Skip menu.
The method to confirm the version of the MT1060/1065 firmware
End of menu.

The method to confirm the version of the MT1060/1065 firmware

If the firmware version is Ver.1.09 or later, the version information will be displayed on [Advanced Menu]/[Help]/[Information]/[Page 4]. If this page is displayed, it means that the projector is equipped with the AUTO 3D Reform, and the USB memory device and USB memory card reader can be used. If the firmware version is earlier than Ver.1.09, [Page 4] will not be displayed on [Advanced Menu]/[Help]/[Information]. To use the AUTO 3D Reform, you need to download the update file from the download page and install the firmware upgrade.
The USB memory device and the USB memory card reader can be used if the last alphabetic character of the serial number attached to the main unit of the MT1060/MT1065 is "J" or higher, even when [Page 4] is not displayed. If the last alphabetic character comes before "J", you will need to download the update file from the download page and install the firmware upgrade.

Top of this page

Copyright NEC Display Solutions. All rights reserved.