This is the top of the page.
Displaying present location in the site.
  1. Home
  2. Download
  3. Projector
  4. Software & Driver
  5. File Description
Main content starts here.

File Description

Firmware

MultiPresenter Stick (DS1-MP10RX) Update Software

This software will update your firmware with the following features.
New features in Version 1.02

  • Check file format of image file if it can be registered as wallpaper.

New features in Version 1.01

  • Support connecting to networks via wired LAN. (*)
  • Automatically select the wireless LAN channel.
  • Limit the communication speed of MultiPresenter function.
  • PIN code-connection in all wireless LAN operation modes.

(*) About the confirmed wired network adapters.

NP-P502H/NP-P502W/NP-P452H/NP-P452W/NP-CR5450H/NP-CR5450W Update Software

This software will update your firmware with the following features.

New features in Ver.1.05

  • Incorporation of requirements set out under the EU Radio Equipment Directive (RED) 2014/53/EU.
  • Improvement of connectivity with PJLink / Crestron RoomView®.

New features in Ver.1.04

  • Enhanced features for MultiPresenter.
    • Addition of PIN CODE connection.
    • Addition of INTELLIGENT CONNECTION.
  • Improvement of connection capability with Image Express Utility 2.0.

NP-P502HL-2/NP-P502WL-2/NP-P502HL/NP-P502WL/NP-CR5450HL/NP-CR5450WL Update Software

This software will update your firmware with the following features.

New features in Ver.3.01

  • Incorporation of requirements set out under the EU Radio Equipment Directive (RED) 2014/53/EU.
  • Improvement of connectivity with PJLink / Crestron RoomView®.

New features in Ver.3.00

  • Enhanced features for MultiPresenter.
    • Addition of PIN CODE connection.
    • Addition of INTELLIGENT CONNECTION.
  • Improvement of connection capability with Image Express Utility 2.0.

New features in Ver.2.02

  • Enhaunced features of the WEB SHARING.
    • Supporting multiple languages.
    • Addition of the SAVE BUTTON.
    • Addition of the DELETE ALL PAGES.
  • Improvement of connectivity with the Miracast function.

NP-PA653U/PA703W/PA723U/PA803U/PA853W/PA903X Update Software

This software will update your firmware with engineering changes shown below.

The improvement in Ver.1.04

  • Improvement of function when using Option Lens NP41ZL.
  • Added compatibility for Option Lens NP43ZL.

NP-PA653UL/NP-PA803UL Update Software

This software will update your firmware with engineering changes shown below.

The improvement in Ver.1.04

  • Added compatibility for Option Lens NP43ZL.

NP-UM352W Update Software

This software will update your firmware with the following features.

New features in Ver.1.09

  • ncorporation of requirements set out under the EU Radio Equipment Directive (RED) 2014/53/EU.
  • Improvement of connectivity with PJLink / Crestron RoomView®.

New features in Ver.1.08

  • Improvement of the behavior of REMOTE PEN OFF/ON button in APPS MENU.

MT1075 Update Software

This software will update your firmware and setting data with the following features.
New features in Ver.1.04

  • Power management function is improved.

NP2000 / NP1000 Update Software

This software will update your firmware and setting data with the following features.
New features in Ver.1.05

  • Corrections to the error status display for HTTP server / SNMP / PJLink
  • Corrections to bugs and problems with PJLink

VT770 Update Software

This software will update your firmware and setting data with the following features.
New features in Ver.1.06

  • Supported optional USB memory (NP01MD).

in Ver.1.05

  • Support of USB READER "ImageMate USB 2.0 Reader/Writer SDDR-93-03"
  • Improvement of the San Disk products USB memory and USB card reader recognition.

WT615 / WT610 Update Software

This software will update your firmware and setting data with the following features.
New features in Ver.1.09

  • Improvement of connection capability by Wireless LAN.
  • Improvement of connection capability with Image Express Utility 2.0.
  • Available for Image Express Utility 2.0 ( Ver.2.05 )

Software

MultiPresenter

MultiPresenter is an application software which enables you to display your device's screen(computer, smart phone, etc.) on the receiver device(projectors) via wired or wireless LAN.

NEC Software Utility Installation Guide (4th edition)

"NEC Software Utility Installation Guide" gives an overview and describes the use of the following software. Look over this guide in conjunction with the Help function of the software programs.

  • Dynamic Image Utility 2.0
  • Image Express Utility 1.0
  • Viewer PPT Converter 2.0

Desktop Control Utility 1.0

"Desktop Control Utility 1.0" is software that operates the desktop screen of a personal computer at a remote location from the projector by using a network.

  • A commercially available USB mouse is connected to the projector to operate the personal computer.
  • By using Desktop Control Utility 1.0, you can project presentation materials (such as PowerPoint slideshows) from the projector without moving your personal computer to the conference room.

Dynamic Image Utility 2.0

  • Converts PowerPoint files, JPEG images, and other files and creates slides that can be displayed with the viewer function of the projector.
  • Captures portions of the image from the screens of word processors, spreadsheets, browsers, and other programs for use in presentations.
  • By saving the created slides on a flash memory card (*1) and inserting the card into the PC Card slot of the projector, the slides can be projected to the screen without connecting a personal computer.
  • The connection of personal computers and projectors by means of a network environment (*2) or connection with USB cable(*3) or serial cable allows the following uses. (In a network environment or USB cable connection(*3), support of multiple units is permitted.)

(1) Images and slides can be sent from the personal computer to the projector and then projected to the screen. When using Microsoft PowerPoint 2000/2002/2003, slides can be sent synchronized with the slide show page feed.
(2) A personal computer can be used to switch the projector power on/off, control the adjustment of image quality and other settings, and to display the remaining lamp life

eBeam Interactive

Like a USB mouse, using the electronic pen enables you to operate the personal computer. Furthermore, assuming that the projector screen as a white board, any characters and figures can be drawn on it using the electronic pen.

Geometric Correction Tool

"The Geometric Correction Tool " corrects geometrical distortion of an image projected onto a special shaped screen such as a cylindrical screen, and a spherical screen from the projector. This program allows you to control the projector via a computer. .

Image Express Utility 1.0

  • Using a network environment (*2), this program enables the screen image displayed by the personal computer to be sent to the projector and then projected to a screen.
  • Two methods are available for sending the screen image to the projector. "Continuous Transmit" automatically sends the screen image of the personal computer at a fixed interval. "Single Frame Transmit" sends the screen image by clicking the screen button (or pressing a key).

Image Express Utility 2.0

"Image Express Utility 2.0" is a software tool used to send the screen of your personal computerto the projector via a network, without the signal cables.

  • NEC's original compression algorithm allows high-quality images to be sent over the networkat high speed, from your personal computer to the projector.
  • Images can be sent from a personal computer to not only one projector but also to two ormore projectors at the same time.

Image Express Utility 2 for Mac OS (Intel)

  • "Image Express Utility 2 for Mac OS" is a software program to send images on the computer intoshscreen to a projector via wireless/wired LAN to project them on the screen.
  • "Image Express Utility 2 for Mac OS (Intel)" runs on Mac OS X 10.4.4 (Intel) or higher. It doesnot run on Mac OS (PowerPC).

Image Express Utility 2 for Mac OS (PowerPC)

  • "Image Express Utility 2 for Mac OS" is a software program to send images on the computer intoshscreen to a projector via wireless/wired LAN to project them on the screen.
  • "Image Express Utility 2 for Mac OS" runs on Mac OS X 10.2.8 or higher.

Image Express Utility Lite

Image Express Utility Lite is software that projects a PC's display on a projector. It allows the PC's display to be transferred to a projector using the network with high quality and at high speed.

  • USB Display
    • Computer's screen image can be projected via a USB cable, without connecting a computer cable (VGA).
    • Just connecting the computer and the projector over a USB cable will make the USB Display function available (Plug & Play) even without installing Image Express Utility Lite on the computer.
  • Image transmission
    • The screen of your computer can be sent to the projector via a wired or wireless network without a computer cable (VGA).
    • By using "EASY CONNECTION" function, the complicated network settings can be simplified and the computer will automatically connect to the projector.
  • Geometric Correction Tool (GCT)
    • The Geometric Correction Tool (GCT) function allows you to correct distortion of images projected even from an angle.
      [NOTE] For the models M350X/M300X/M260X/M230X/M300W/M260W, Import, Export and Delete of the "Geometric Correction" setting cannot be done to the projector when the firmware version is "1.01" or lower.
  • Sound transmission
    • When connected to a projector supporting the sound transmission function, the sound is transmitted along with the images.
      * For the available models of this function, please refer to "Supported Projector" column.
  • Movie streaming
    • Movie files on your computer can be transferred to the projector via the network and played on the projector.
      * For the available models of this function, please refer to "Supported Projector" column.
  • Multiple connections
    • It enables that the multiple terminals connects to a projector.
    • The screen images of the multiple terminals can be displayed on the projector's screen, by the split screen mode or the full screen mode.
      * For the available models of this function, please refer to "Supported Projector" column.

Image Express Utility Lite for Mac OS

Image Express Utility Lite for Mac OS is software that projects a computer's display on a projector. It allows the computer's display to be transmitted to a projector using the network with high quality and at high speed. Image Express Utility Lite for Mac OS runs on Mac OS X 10.6 or 10.7, 10.8, 10.9, 10.10 and 10.11. It doesnot run on Mac OS (PowerPC).

  • The screen of your computer can be sent to the projector via a wired or wireless network without a VGA cable.
  • By using "EASY CONNECTION" feature, the complicated network settings can be simplified and the computer will automatically connect to the projector.
  • The screen of your computer can be sent to up to four projectors at the same time.

MirrorOp Sender Lite for Mac

MirrorOp Sender Lite for Mac is software program for connecting the projector and computer by wireless LAN, sending the computer’s screen to the projector and projecting it on the projector’s screen.The computer’s screen can be projected on the projector’s screen wirelessly.

MirrorOp Lite for Windows

MirrorOp Lite for Windows is software program for connecting the projector and computer by wireless LAN, sending the computer’s screen to the projector and projecting it on the projector’s screen.The computer’s screen can be projected on the projector’s screen wirelessly.

PC Control Utility 1.0

Software used to control a projector with a personal computer. It can be changed the background image, which is displayed in the absence of an input signal.

  • *This function is used with the projector and the personal computer connected by a serial cable.

PC Control Utility 3.0

"PC Control Utility 3.0" is software that allows you to operate the projector from the personalcomputer when the personal computer and the projector are connected with LAN (wired or wireless) or a serial cable(RS-232C).

PC Control Utility Pro 3.0

"PC Control Utility Pro 3.0" is a program for controlling the projector connected through various communications methods (LAN or serial), for operating and managing the projectors.

PC Control Utility Pro 4 / 5 for Mac OS

The software controls the power on/off switching, the input signal switching, and other functions of the connected projector, and manages the lamp usage time and wide variety of other information.
The software also permits control of the projector according to a specified schedule, and can send e-mail when an error has occurred with the projector.

PtG2 Converter (for Windows)

PtG2 Converter is MobiShow®-proprietary software for conversion of Powerpoint from .ppt into .ptg2 format.

Viewer PPT Converter 2.0

  • Converts files created with Microsoft PowerPoint 95/97/2000/2002/2003 to an independent index format with a simple operation to enable direct playback with the viewer function of the projector.
  • When using Microsoft PowerPoint 2000/2002/2003, Viewer PPT Converter 2.0 can be started from PowerPoint (by means of add-in registration to PowerPoint).

Viewer PPT Converter 3.0 (Supported Windows 2000)

"Viewer PPT Converter 3.0" is software that converts files created with PowerPoint 95/97/2000/2002/2003/2007 into an index file that can be displayed with the viewer function of the projector.

  • If PowerPoint 2000/2002/2003/2007 is installed in your personal computer, you can activate Viewer PPT Converter 3.0 from PowerPoint (PPT Converter add-in is automatically registeredto PowerPoint).

Viewer PPT Converter 3.0

"Viewer PPT Converter 3.0" is software that converts files created with PowerPoint 95/97/2000/2002/2003/2007/2010 into an index file that can be displayed with the viewer function of the projector.

  • If PowerPoint 2000/2002/2003/2007/2010 is installed in your personal computer, you can activate Viewer PPT Converter 3.0 from PowerPoint (PPT Converter add-in is automatically registeredto PowerPoint).

Viewer Utility

Software used to change screen, image file, PowerPoint® file of the personal computer into the format which can be displayed using the viewer feature of the projector.

Virtual Remote Tool (Supported Windows2000)

"Virtual Remote Tool" is software for operating a projector from a computer; the projector is connected with a computer connection cable (signal cable).

The following projector operations are possible from the personal computer:

  • Power on / off
  • Input signal switching
  • Muting (temporarily disabling audio / video)
  • Freezing (locking the projected image)
  • Operating Remote Control

[Note]
Use the supplied VGA signal cable for your projector. This function may not work depending on the specifications of your connected computer or your graphics adaptor and the version of your driver.

Virtual Remote Tool

This is software for operating a projector connected by LAN (wired or wireless), serial connections (RS-232C) or computer connection cable (signal cable) from the computer.
The following projector operations are possible from the personal computer:

  • Power on / off
  • Input signal switching
  • Muting (temporarily disabling audio / video)
  • Freezing (locking the projected image)
  • Operating Remote Control
  • The logo image transmission

[Note]
Logo image transmission and computer cable connection are not possible depending on the projector types.
Use the supplied VGA signal cable for your projector. This function may not work depending on the specifications of your connected computer or your graphics adaptor and the version of your driver.

IWB Setup Software / EyeRIS NEC edition

"IWB Setup Software / EyeRIS NEC edition" is driver and calibration software for Interactive White Board Kit and a camera device on supported projector.

E-board software [eBeam]

As well as entering notes and text on the screen, it can also operate as a mouse. You can save diagrams written in PowerPoint as Objects.

Patch

ArcSoft MediaImpression Version Upgrade Patch

  • The patch to upgrade the ArcSoft MediaImpression contained in the Projector application CD-ROM.

Ulead Photo Explorer 8.0 SE Basic for NEC Projector Update Patch for Windows Vista

  • This is the Patch which enabels you to use Ulead Photo Explorer 8.0 SE Basic for NEC Projector (“PEX8”) on Windows Vista®.

Top of this page