This is the top of the page.
Displaying present location in the site.
  1. Home
  2. Download
  3. Projector
  4. Software & Driver
  5. Software
  6. Image Express Utility 2.0 , Desktop Control Utility 1.0
Main content starts here.

Image Express Utility 2.0 for Windows XP
Desktop Control Utility 1.0 for Windows XP

Software which can be downloaded from this page is the latest version of NEC Projector User Supportware which is stored in the CD-ROM which is attached with NEC Projector.

You can start the program and clicked "Help" to get version information.

To use "Image Express Utility 2.0" and "Desktop Control Utility 1.0" on computers on which a personal firewall is running, it may be necessary to make certain settings on the personal firewall. If the computer cannot communicate properly with the projector, try changing the personal firewall settings.
For instructions on making the personal firewall settings, either refer to the software's operating instructions or contact the software manufacturer's customer support center.

Image Express Utility 2.0 for Windows XP

Version : Ver. 2.17.263

Overview:

This software cannot be installed in Windows Vista / 7 / 8.
Uses an original compression algorithm to transfer high-quality images from your personal computer to the projector at high speed over the network.

  • High-speed and high-quality image transfer based on an original compression algorithm.
  • Simultaneous projection by multiple projectors.
  • " Easy Connection " function allows easy setup of wireless LAN.
  • Allows projected images to be sent to and saved on personal computers.
  • 1-Click switching of presenter.
  • Central management of the personal computer to project from.

Correction point to Ver. 2.17.263

Ver. 2.15.257 → Ver. 2.17.263

  • Support of
    • NP-PA721X/NP-PA621X/NP-PA671W/NP-PA571W/NP-PA621U/NP-PA521U
  • Solved the problem that the mouse cursor is not transmitted to the projector when using the extended monitor.
  • Fixed some minor problems.

Supported Projector (MODEL NO.)

  • LT265 / LT245 ( Firmware Version : 1.04 or later )
  • WT615 / LT610 ( Firmware Version : 1.08 or later )
  • LT380 / LT280
  • VT800
  • NP3250 / NP3250W / NP2250 / NP1250 / NP3151W / NP3150 / NP2150 / NP1150 / NP2000 / NP1000 / NP905 / NP901W
  • NP-P420X / NP-P350X / NP-P350W
  • NP-PA600X / NP-PA500X / NP-PA550W / NP-PA500U
  • NP-PX800X / NP-PX700W /NP-PX750U
  • NP-PH1000U
  • NP-P501X / NP-P451X / NP-P451W / NP-P401W
  • NP-PA721X / NP-PA621X / NP-PA671W / NP-PA571W / NP-PA621U / NP-PA521U

Desktop Control Utility 1.0 for Windows XP

Version : Ver. 2.17.263

Overview:

This software cannot be installed in Windows Vista / 7 / 8.
Uses a network connection to operate a remote personal computer from the projector.

  • A USB mouse is connected to the projector, and is used to operate the personal computer.
  • By using Desktop Control Utility 1.0, you can project presentation materials (such as PowerPoint slideshows) from the projector without moving your personal computer to the conference room.

Correction point to Ver. 2.17.263

Ver. 2.15.257 → Ver. 2.17.263

  • Support of
    • NP-PA721X/NP-PA621X/NP-PA671W/NP-PA571W/NP-PA621U/NP-PA521U
  • Solved the problem that the mouse cursor is not transmitted to the projector when using the extended monitor.
  • Fixed some minor problems.

Supported Projector (MODEL NO.)

  • LT265 / LT245 ( Firmware Version : 1.04 or later )
  • WT615 / LT610 ( Firmware Version : 1.08 or later )
  • LT380 / LT280
  • VT800
  • NP3250 / NP3250W / NP2250 / NP1250 / NP3151W / NP3150 / NP2150 / NP1150 / NP2000 / NP1000 / NP905 / NP901W
  • NP-P420X / NP-P350X / NP-P350W
  • NP-PA600X / NP-PA500X / NP-PA550W / NP-PA500U
  • NP-P501X / NP-P451X / NP-P451W / NP-P401W
  • NP-PA721X / NP-PA621X / NP-PA671W / NP-PA571W / NP-PA621U / NP-PA521U

Operating Environment

Supported Hardware IBM PC/AT compatible computers
CPU Sender Personal Computer
  • Pentium MMX processor required
  • Pentium III 800MHz or higher recommended
Recipient Personal Computer (Image Express Utility 2.0)
  • Pentium III 800MHz required
  • Pentium 4 1.6GHz or higher recommended
Memory Windows XP
  • 128 MB required
  • 192 MB or higher recommended
*More memory may be necessary if running other applications at the same time.
Supported OS Windows XP Home Edition Service Pack 2 or later
Windows XP Professional Service Pack 2 or later
Windows XP Tablet PC Edition 2005 or later
(Windows XP Tablet PC Edition Service Pack 2 or later )
* " Easy Connection " function is only available when logged onto Windows XP as a user with " Computer Administrator " privileges.
This software cannot be installed in Windows Vista / 7 / 8.
Graphics Processor [ Windows Experience Index > Graphics ] is 3.0 or higher recommended
Network Environment Wired or wireless LAN required
Resolution VGA (640×480) required
XGA (1024×768) recommended
Screen Colors High Color (15 bit, 16 bit)
True Color (24 bit, 32 bit) (recommended)
* 256 or fewer colors are not supported.

Installation instruction

Installer common for Windows Japanese/English/Chinese(simplified) edition.
Execute the installer and the setup wizard will be activated. Follow the guidance of the wizard to install the software.

When installing / uninstalling software in Windows XP, you must log on as a user with " Computer Administrator " rights.
If former version of " Image Express Utility 2.0 " or " Desktop Control Utility 1.0 " is already installed on your computer, please uninstall it before proceeding to the installation process.

Go to download

Choose a filename from the following list.

language file name file size
English Image Express Utility 2.0
IEU20XP_217263.exe 
44.0MB
Desktop Control Utility 1.0
DCU10XP_217263.exe 
6.16MB
Network Setup Guide
NP3250_network_guide_E.pdf
4.04MB

Top of this page