NP-PA653U/PA703W/PA723U/PA803U/PA853W/PA903X Update Software
Introduction of the Software
The NP-PA653U/PA703W/PA723U/PA803U/PA853W/PA903X Update Software (hereafter, " Software ") will update your firmware with the following features.
FIRMWARE | Version 1.04 |
---|
Changed Items
NP-PA653U/PA703W/PA723U/PA803U/PA853W/PA903X Update Software
This software will update your firmware with engineering changes shown below.
The improvement in Ver.1.04
- Improvement of function when using Option Lens NP41ZL.
- Added compatibility for Option Lens NP43ZL.
CAUTION
Improper updating procedures or disconnecting the power cord from the projector during data writing can result in projector not turning on or return the software in factory default version.
Read this document carefully and avoid improper updating.
Should a power failure, lightning, accidental shutdown or noise occurrence during writing of data, the projector may fail to function properly.
In the worst case, this can lead to damage to the equipment.
Target customer
Customers who use the following model:
NP-PA653U
NP-PA703W
NP-PA723U
NP-PA803U
NP-PA853W
NP-PA903X
Updating
Please refer to "Go To Download" and "NP-PA653U_series Firmware Data Update Procedure - (r170803).pdf" in "NP-PA653U_series_Firmware_Updatefiles.zip".
Go to download
Click the filename in the following list.
download file | file name | file size |
---|---|---|
NP-PA653U / PA703W / PA723U / PA803U / PA853W / PA903X Update Software | NP-PA653U_series_Firmware_Updatefiles.zip | 15.9MB |