

The ECO MODE reduces power consumption, and the Carbon Meter indicates the accumulated amount of reduced carbon dioxide. The energy-saving 26-inch/24-inch/22-inch wide models and the 19-inch standard LCD monitors are optimum solutions for enterprises introducing multiple monitors.
24-inch wide LCD monitor with built-in stereo speaker equipped with 2-system Input (Digital/Analogue) and the USB Hub Function
![]() |
![]() ![]() |
Features
The ECO function saves on power consumption and reduces CO2 emissions.
ECO MODE saves power consumption
Lower power consumption by reducing the brightness to the lowest level that can be used for normal operation.
The maximum brightness can be set to 60%. The amount of CO2 emissions is indicated under the brightness adjustment bar.
Once the power is turned on in ECO MODE, the ECO indicator is displayed as a reminder to consider the environment.
If the power is turned on when the ECO MODE is OFF, the indicator will show that the ECO mode is turned off.
Carbon Meter (the function indicating the accumulated amount of the reduced carbon dioxide)
The accumulated amount of reduced CO2 emissions (kg) as a result of saving on power consumption with the ECO MODE.
* The reduced amount of CO2 is calculated on the CO2 electric power conversion value of the 2006 edition of OECD (Organisation for Economic Co-operation and Development).
Pivot Function* to display in portrait mode
Portrait mode is available by rotating the panel 90°. Portrait mode is suitable for displaying documents, images or websites.
* Dedicated software is separately required for portrait mode.
The Stand Height Adjustment Function is capable of adjusting the height within the range of 110 mm.
With the Stand Height Adjustment Function raising/lowering the height of the monitor up to 110 mm, the monitor can be set at a visible position for the user or as necessary for the use environments. The angle of the monitor can also be adjusted vertically and horizontally.
LED Brightness Adjustment Function
The brightness of the power supply lamp is adjustable, so that it will not interfere with displayed images when viewing dark scenes or in a multi-display environment.
Application:EA261WM/EA261WM-BK/EA241WM/EA241WM-BK/EA191M/EA191M-BK
The 2-system Input (Digital/Analogue) is available in standard configuration.
With the 2-system Input, it is possible to connect two PCs to the monitor at the same time and control them independently. The DVI-D connector for digital signals and the Mini-S-SUB15 pin for analogue signals are used. The button on the front panel switches the input signals. For digital input, initial settings for the screen are not required. It is possible to reproduce real images with significantly less signal deterioration.
The USB Hub Function making possible to connect various kinds of peripheral devices
By attaching importance to expandability, 1 x the upstream port, 2 x the downstream port (on the backside) and 2 x the downstream port (on the side panel) are provided in standard configuration. Various peripheral devices supporting the USB interface such as memory and a mouse can be connected.


Application:EA261WM/EA261WM-BK/EA241WM/EA241WM-BK/EA221WM/EA221WM-BK
The monitor has built-in Stereo Speakers.
The main unit of the monitor has stereo speakers (output 1W+1W). Contents having various kinds of digital sounds can reproduce.
Excellent picture quality with PVA TFT
Stable and excellent picture quality with NTAA (Non-Touch-Auto-Adjustment) and PVA TFT display
Application:EA191M/EA191M-BK
Specifications
Model | MultiSync EA241WM / EA241WM-BK | Notes | |
LCD Module | Diagonal: | 61.1 cm / 24.0 inches | Active matrix; thin film transistor (TFT) liquid crystal display (LCD); 0.270 mm dot pitch |
Viewable Image Size: | 61.1 cm / 24.0 inches | ||
Native Resolution (Pixel Count): |
1920 × 1200 | ||
Input Signal | Video: Sync: |
ANALOG 0.7 Vp-p/75 Ohms Separate sync.TTL Level Positive/Negative Composite sync.TTL Level Positive/Negative Sync on Green (Video 0.7 Vp-p and Sync Negative 0.3 Vp-p) |
Digital Input: DVI-D with HDCP |
Display Colours | 16,777,216 | Depends on display card used. | |
Synchronization Range | Horizontal: Vertical: |
31.5 kHz to 81.1 kHz (Analog) 31.5 kHz to 81.1 kHz (Digital) 56.0 Hz to 75.0 Hz (Over SXGA: 60Hz) |
Automatically Automatically Automatically |
Viewing Angle | horizontal 170° / vertical 160° (CR > 10) | ||
Brightness | 400 cd/m² | ||
Contrast Ratio (typ.) | 1000 : 1 | ||
Image Formation Time (Typ.) | 5ms | ||
Resolutions Supported | 720 × 400*1 : VGA text 640 x 480*1 @ 60 Hz to 75 Hz 800 x 600*1 @ 56 Hz to 75 Hz 832 x 624*1 @ 75 Hz 1024 x 768*1 @ 60 Hz to 75 Hz 1152 x 870*1 @ 75 Hz 1280 x 1024*1 @ 60 Hz to 75 Hz 1400 x 1050*1 @ 60 Hz 1440 x 900*1 @ 60 Hz 1600 x 1200*1 @ 60 Hz 1680 x 1050*1 @ 60 Hz 1920 x 1200 at 60 Hz......................... |
Some systems may not support all modes listed. NEC DISPLAY SOLUTIONS cites recommended resolution for optimal display performance. |
|
Active Display Area | Landscape:Horiz.: Vert.: Portrait: Horiz.: Vert.: |
518 mm / 20.4 inches 324 mm / 12.8 inches 324 mm / 12.8 inches 518 mm / 20.4 inches |
|
USB Hub | I/P: Port: Load Current: |
USB Specification Revision 2.0 Upstream 1 Downstream 4 Maximum 0.5A per port |
|
Speakers | Practical Audio Output: | 1.0 W + 1.0 W | |
Power Supply | AC 100-240 V ~ 50/60 Hz | ||
Current Rating | 1.25-0.65 A (with USB and Audio) | ||
Dimensions | Landscape: Portrait: Height Adjustment: |
558.6 mm (W) × 437.0 - 547.0 mm (H) × 272.4 mm (D) 22.0 inches (W) × 17.2 - 21.5 inches (H) × 10.7 inches (D) 366.2 mm (W) × 574.1 - 646.7 mm (H) × 272.4 mm (D) 14.4 inches (W) × 22.6 - 25.4 inches (H) × 10.7 inches (D) 110.0 mm / 4.3 inches (Landscape condition) 72.6 mm / 2.8 inches (Portrait condition) |
|
Weight | 10.5 kg (23.1 lbs) | ||
Environmental Considerations | Operating Temperature: | 5°C to 35°C / 41°F to 95°F | |
Humidity: | 20% to 80% | ||
Altitude: | 0 to 6,562 Feet / 0 to 2,000 m | ||
Storage Temperature: | -10°C to 60°C / 14°F to 140°F | ||
Humidity: | 10% to 85% | ||
Altitude: | 0 to 40,000 Feet / 0 to 12,192 m |
NOTE: Technical specifications are subject to change without notice.
Dimensions
MultiSync EA241WM/EA241WM-BK
- An adapter (optional) may be required to connect the display to an Apple computer. Confirm the shape of the connector on your Apple computer. No adapter is required to connect a model with the 15pin Mini D-sub VGA connector.
- This product satisfies the criteria for the International Energy Star Program as a participating company in the International Energy Star Program.
- The specifications and designs described in this site may be changed without notice.
- Colours printed on this site may differ slightly from the actual product.
- Confirm the terms of the warranty certificate and store carefully.
- Read the operation manual carefully for proper use of the product.
- For product prices with open prices, contact your retail dealer.
- Images on the screen are pasted.
- All brand and product names are registered trademarks of their respective holders.
Further trademark information