LCD Monitor MultiSync LCD5710


57 full HD (1920 x 1080 pixels) LCD panel

57 full HD (1920 x 1080 pixels) LCD panel is employed. Display vivid, high quality images from the next generation DVD format.
The display delivers superior performance that is visible even in bright locations by achieving a high brightness of 450cd/m2, a high contrast ratio of 1000:1, and a wide viewing angle.

Top of this page


The Response Improvement Circuit improves the response times for Gray-to-Gray tones. More advanced performance can be achieved by reducing ghosting and noise when displaying motion pictures.

Top of this page

Numerous input connectors cover a wide range of signals

A variety of different sources can be used to display images with the DVI-D and mini D-SUB 15pin connector for PC signals, S-Video connector for video signals, and the HD connector for digital video signals.
Highly reliable BNC connectors are employed for many of the connections to provide the appropriate specifications for business use.

Top of this page


Resolution Full HD 1920 X 1080
Model MultiSync LCD5710
  Analog Input Digital Input
LCD Module   57" / 145.0cm diagonal
Pixel Pitch: 0.6518mm
Resolution: 1920 x 1080 dots
Colour: Over 16 million colours (depending on video card used)
Brightness: 450cd/m2 (Typ.)
Contrast Ratio: 1800:1
Viewing Angle:

178° (typ) @ CR>10
178° (typ) @ CR>10
Design View Distance: 1500mm
Frequency Horizontal: 15.625/15.734kHz, 31.5kHz - 91.1kHz 31.5kHz - 91.1kHz
Vertical: 50.0/58.0 - 85.0 Hz
Pixel Clock 25.0MHz - 165.0MHz
Viewable Size 1251.4 x 703.9mm
Input Signal PC-Input: Video: Analog RGB 0.7V p-p TMDS
Input Impedance 75Ohm
Composite sync on Green Video: 0.3Vp-p Neg. (video 0.7Vp-p Pos.)
Sync: Separate: TTL level (Pos./Neg.)
Input Impedance 2.2KOhm (RGB3: 2.2k ohm/75 ohm selectable)
Input-terminal: BNC (R,G,B,H,V) 15pin Mini D-sub DVI-D (Digital)
VIDEO Input: Composite 1.0V p-p Input Impedance 75Ohm BNC and RCA-INPUT
Y/C Y:0.7V p-p C:0.283V p-p Input Impedance 75Ohm S-TERMINAL-INPUT
Component 1.0/0.7V p-p Input Impedance 75Ohm BNC-INPUT
RS-232C In: 9 Pin Mini D-sub
Out: 9 Pin D-sub (with daisy chain)
Output Signal PC-Input:
(RGB3 only)
Video: Analog RGB Video: 0.7V p-p with 75 ohm terminated
Sync: Separate HV sync: TTL level (Posi / Nega) with 2.2k ohm terminated
Output-terminal: BNC (R,G,B,H,V)
VIDEO Output: BNC 1 Output, Composite 1.0V p-p with 75 ohm terminated
AUDIO Output: RCA PIN-JACK L/R: 1 Output, 0.15Vrms with 1k ohm terminated
Speaker Output: External Speaker Jack 7W + 7W (8 ohm)
Resolutions Supported 640 x 480 at 60Hz to 85Hz
800 x 600 at 50Hz, 60Hz to 85Hz
1024 x 768 at 50Hz, 60Hz to 85Hz
1280 x 768 at 50Hz, 60Hz to 85Hz
1360 x 768 at 50Hz, 60Hz to 85Hz
1280 x 1024 at 60Hz to 85Hz
1600 x 1200 at 60Hz
1920 x 1080 at 60Hz*................................................. Maximum Resolution
* Recommended Resolution
NTSC/PAL/SECAM/4.43NTSC/PAL60 Component: 480i, 480p, 720p, 1080i
Power Supply 3.9 - 1.65A @ 100-240VAC, 50/60Hz
5 - 40°C
20 - 80% (Without condensation)
-20 - 60°C
10 - 90% (Without condensation) / 90% - 3.5% x (Temp - 40°C) regarding over 40°C
Dimension Net:

1357.8 (W) x 792.8 (H) x 164 (D) mm (Without stand)
1357.8 (W) x 825.1 (H) x 480 (D) mm (With stand)
1587 (W) x 965 (H) x 377 (D) mm
Weight Net:
66.0Kg (With stand), 62.0Kg (Without stand)
VESA compatible arm
mounting interface
3 x 200mm x 200mm (8 Holes)
2 x 200 mm x 200 mm (6 Holes)
Complied Regulatory and Guidelines UL60950-1/CSA C22.2 No.60950-1/ TUV-GS/EN60950-1/NOM/IRAM/CCC/BSMI
Power Management VESA DPM
Plug & Play VESA DDC2B, DDC/CI
Accessories User's manual, Power Cord, Video Signal Cable, Remote Control,
AA Battery x 2, Clamp x 3, Screw x 9, CD-ROM,
Ferrite Core x 2, Curled head Screw for stand x 2, Band x 2, Speaker plug x 1set, Main power switch cover
NOTE: Technical specifications are subject to change without notice.

Top of this page


MultiSync LCD5710 Dimension

Top of this page


1 ) AC IN connector
Connects with the supplied power cord.
7 ) AUDIO IN 1, 2, 3
Connecting equipment such as a DVD player, HDTV device, or Laser disc player.
2 ) RGB 1 IN (DVI-D)
To input digital RGB signals from a computer.
* This connector does not support analog input.
To output the audio signal from the AUDIO IN 1, 2 and 3
3 ) RGB 2 IN (mini D-Sub 15 pin)
To input analog RGB signals from a personal computer or other RGB equipment
VIDEO IN connector (BNC and RCA): To input a composite video signal. BNC and RCA connectors are not available at the same time. (Use only one input).
VIDEO OUT connector (BNC): To output the composite video signal from the VIDEO IN connector.
S-VIDEO IN connector (DIN 4 pin): To input the S-video (Y/C separate signal).
4 ) RGB 3 IN [R, G, B, H, V] (BNC)
To input analog RGB signals from a computer or other RGB equipment.
5 ) RGB OUT connector (BNC)
To output the signal from RGB 3.
10 ) EXTERNAL CONTROL (D-Sub 9 pin)
IN connector: Use when operating the LCD monitor from the RGB equipment like a computer.
Out connector: To connect multiple MultiSync LCD5710 monitors.
6 ) DVD/HD connector (BNC)
Connecting equipment such as a DVD
player, HDTV device, or Laser disc player.
To output the audio signal from AUDIO 1, 2 or 3 jack.

Top of this page

  • Although TFT colour LCD panels are produced with advanced technologies of very high accuracy, there may be some missing or defective pixels. Please note these phenomena are unavoidable.
  • Be advised that processing original images, such as compressing or extending, for public display on a wide screen TV in a public area whether or not for profit may infringe rights protected under copyright laws.
  • To connect the display to an Apple's Mac Series, an adapter (optional) may be required. Confirm the shape of the connector on your Apple's Mac Series. No adapter is required for connecting to a model with the mini D-sub 15-pin VGA connector.
  • The specifications and designs described in this site may be changed without notice.
  • Colours printed on this site may differ slightly from the actual product.
  • Confirm the terms of the guarantee certificate and store it carefully.
  • Read the operation manual carefully for proper use of the product.
  • Images on the screen are pasted. Software shown on the screen is used for demonstration purposes only and may not be available commercially.
  • All brand and product names are registered trademarks of their respective holders.
    Further trademark information


Top of this page

End of main content.