This is the top of the page.
Displaying present location in the site.
  1. Home
  2. Monitor
  3. Non current Products
  4. MultiSync X401S
Main content starts here.

40" MultiSync X401S

Thinner and lighter for sleek, discreet digital signage.

MultiSync X401S


Model Viewable Image Size Brightness Maximum display pixels Viewing angle Contrast ratio
X401S 40" Maximum value 700cd/m²
Standard value 500cd/m²
1,920 x 1,080 Horizontal 178°
Vertical 178°

White LED backlight technology enables a super slim and light weight design, providing you with unprecedented layout and installation flexibility


Ultra sleek and lightweight - that's the NEC new super-slim series

Ultra sleek and lightweight - that's the NEC new super-slim series

The display can be installed both horizontally and vertically to accommodate various installation requirements. It can also be placed face up embedded on the floor or a table to facilitate more creative digital signage configurations.

An extremely thin and lightweight body

An extremely thin and lightweight body

The thin body of 43.3 mm makes digital signage possible without disturbing the aesthetic of the room or the design space, even when mounted on a wall or a pillar. The weight has been reduced by about 28% compared to our P series models, which greatly simplifies installation.

Face-up/down installation is also possible

Face-up installation is also possible

The display can be installed both horizontally and vertically to meet various installation requirements. It can also be floor mounted or table top mounted face up while continuing to operate.

Full HD LCD in a slim 18.0 mm bezel

Full HD (1920×1080) large LCD panel comes in a slim 18.0 mm bezel.

10W monaural speaker built-in to easily emit messages

10W monaural speaker built-in

A built-in 10W monaural speaker effectively adds audio to in-store product advertising.

Advanced green technologies provide a lower total cost of ownership

This series comes packed with eco-friendly features, decreasing energy consumption, lowering your expenses over the lifecycle of the display and contributing to environmental awareness.

  • The panel employs white LED backlight and contains no mercury to minimise the effects on the environment. Furthermore, the energy consumption, and thereby CO₂ emissions, have been reduced by 24% compared to our P series.
  • An ambient light sensor ensures consistent brightness regardless of the lighting conditions, while allowing the user to set the brightness level to a pre-determined lower level to automatically compensate and reduce the brightness, thereby decreasing power consumption.
  • A carbon footprint meter helps track and calculate the conservation of greenhouse gas emissions in real time.
  • Real-time clock/round-the-clock scheduling allows advanced scheduling of monitor powering up/ down, increasing panel lifetime, reducing power consumption and saving the time and expense of finding and purchasing a third-party scheduling solution.

24/7 usage

The professional-grade construction of the panel contributes to 24/7 usage, overall longer panel life, lower likelihood of Mura effect from localized heat, virtually no image retention and the ability to use in landscape or portrait orientation.

Customizable Fan control

Customizable Fan control

Ambient light sensor

Ambient light sensor

Calibration function for multi displays

Calibrator for colour setting uses dedicated calibration software* and commercially available colour sensor* when colour differences occur with each display due to aging changes, simplifying colour alignment.

Calibration function for multi displays

For better expandability and installability

Option slot mounted to extend functions

With OPS-SBC module

Installing the Display controller (SBC*) into the expansion slot of the display will allow you to mount the display on a ceiling or a wall without the bother of looking for extra space.

  • *OPS (open pluggable specification) is an open standard for Digital signage set up by Intel Corporation in Oct- 2010.

When switching from a display

Daisy chain function for digital signal

Daisy chain function for digital signal

DVI-D IN and DVI-D OUT connectors enable daisy chaining of digital signals preventing signal degradation during transmission.

  • *The number of connectable units is nine.The number of connectable units may vary depending on the equipment used,and the use of DVI-D cables and DVI-D splitters.


Model X401S
Viewable Size (Diagonal) 40”
Panel Technology S-PVA
Native Resolution 1920 x 1080
Pixel Pitch 0.461 mm
Brightness (typical/Maximum) 500 cd/m² / 700 cd/m²
Contrast Ratio (typical) 3500:1
Active Screen Area (W X H) 885.6 x 498.2 mm
Response Time (Typical) 8ms ( G to G )
Input Terminals RGB1 (Digital) DVI-D
RGB2 (Digital) Dispaly Port
RGB3 (Analog) Mini D-sub 15 pin
RGB4 (Analog) -
Video 1 Composite (BNC & sharing with Mini D-sub 15 pin)
Video 2 S-Video (sharing with Mini D-sub 15 pin)
Video 3 HDMI
Component Video 1
Sharing with Mini D-sub 15 pin
Audio Audio 1 (Stereo Mini Jack), HDMI, DisplayPort
Output Terminal RGB(Analog) -
RGB (Digital) DVI-D
Video -
Audio Stereo Mini Jack
External Control RS-232C in / out for multiple monitor control, Ethernet, DDC / CI, IR
Speaker Output External Speaker 10W + 10W
Internal Speaker 10W Monaural
Additional Features Advanced thermal capabilities, Sealed professional panel, Expansion slot, Ethernet control and communication, Tilematrix (10 x 10), Tilecomp, Programmable lookup tables,Plug and play (DDC/CI, DDC2B), PIP (remote), POP, 6-axis colour adjustment, Multi-level programmable zoom, Scheduler (with RTC), Sharpness/softness, Off-timer (countdown),Screen saver, Main power switch, 10-bit gamma, Auto Brightness (signal input), Windows 7 certified, IR, Portrait-capable, Metal rear cabinet,Handles, Ambient light sensor, Carbon footprint meter, Colour temperature adjustment (2600-10000K)
Power Requirements 2.7 A @ 100-120V, 1.1 A @ 220-240 V
Power Consumption (typical) 110W
Power Consumption - Standby Mode <0.5W
Bezel Width (L/R, T/B) 18.0 mm / 18.0 mm
Dimensions (without stand; WxHxD) 925.1 x 537.1 x 43.3 mm (without OPS)
925.1 x 537.1 x 56.0 mm (with OPS)
Packaging Dimensions (WxHxD) 1068.0 x 700.0 x 224.0 mm
Net Weight 14.9 kg
Gross Weight (without pallet) 21.0 kg
VESA Hole Configuration 300 x 300 mm (M6, 4 holes)
Operating Temperature 0-40°C (0-35°C:When installed face up / down and with OPS-SBC.)
Operating Humidity 20-80% (without condensing)
Included Power cord, Video signal cable (DVI-D), Wireless remote control, Batteries, Clamps, Screws, Screw for option board slot, CD-ROM (user manual),
Option slot cover, Wall mount adapter, Wall mount adapter screw, Cushion for SP-RM
Optional Stand (ST-322), Speakers (SP-RM2),SBC (N8000-8830/N8000-8822),
HD-SDI Board (SB-01HC),3G-SDI Board (SB-04HC)

NOTE: Technical specifications are subject to change without notice.





  • N8000-8830
  • N8000-8822
HD-SDI Board
  • SB-01HC
    HD-SDI Board
3G-SDI Board
  • SB-04HC
    3G-SDI Board

Rear-mount speakers
  • SP-RM2
    Rear-mount speakers SP-RM2

  • ST-322
    Stand ST-322
  • Although TFT colour LCD panels are produced with advanced technologies of very high accuracy, there may be some missing or defective pixels. Please note these phenomena are unavoidable.
  • Be advised that processing original images, such as compressing or extending, for public display on a wide screen TV in a public area whether or not for profit may infringe rights protected under copyright laws.
  • To connect the display to an Apple's Mac Series, an adapter (optional) may be required. Confirm the shape of the connector on your Apple's Mac Series. No adapter is required for connecting to a model with the mini D-sub 15-pin VGA connector.
  • The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing Administrator, Inc. in the United States and other countries.
  • DisplayPort and DisplayPort Compliance Logo are trademarks owned by the Video Electronics Standards Association in the United States and other countries.
  • The specifications and designs described in this site may be changed without notice.
  • Colours printed on this site may differ slightly from the actual product.
  • Confirm the terms of the guarantee certificate and store it carefully.
  • Read the operation manual carefully for proper use of the product.
  • Images on the screen are pasted. Software shown on the screen is used for demonstration purposes only and may not be available commercially.
  • All brand and product names are registered trademarks of their respective holders.
    Further trademark information

Top of this page