Beginning of this page.
Jump to main content.

Please note that JavaScript and style sheet are used in this website,
Due to unadaptability of the style sheet with the browser used in your computer, pages may not look as original.
Even in such a case, however, the contents can be used safely.

NEC NEC Display Solutions, Ltd.
Site menu starts here.
Skip site menu.
End of site menu.
Displaying present location in the site.
Home > DLP Cinema Projector > NC800C
Menu starts here.
Skip menu.
End of menu.

Perfect for screening rooms, post-production facilities and commercial cinemas with smaller screens, NEC's NC800C is the world's lightest digital cinema projector *1 for screens 4 *3 to 10 *2 metres wide. Using DC 2K DMDTM technology, and delivering pristine images at 2048 x 1080 pixel native resolution, the NC800C exceeds Texas Instruments' guidelines for contrast ratio, colorimetry and uniformity.

Suitable for screens up to 10M (32ft) *¹ *²
Precise 2K (2048 x 1080) resolution
High contrast 2000:1 images
Space saving
  • Best suited for Post Production, Studios and installations with limited space
Easy to operate
  • Industry’s FIRST memory functions for lens zoom, position/focus and lamp output *4
  • Industry’s FIRST Lamp changes from the back of projector *1
  • Direct selection buttons for 8 stored projector configurations
  • Projector can be controlled from an optional touch screen
  • Auto lamp brightness control
  • Built-in webserver allows basic control from any web browser
Easy to carry
  • Industry’s FIRST DLP Cinema Projector which can be transported without having to remove the lamp from the projector *1. Suited to rental application
Minimal maintenance
  • DLP chip shielding prevents dust, oil and smoke particles from settling on DLP chip surface *4

*1 Among DLP Cinema Projectors, according to a survey conducted by NEC in June, 2007.
*2 This can be achieved under the below instllation conditions.
1) At screen gain 1.8/14ft-1
2) Use NEC 1.25kW high efficiency lamp bulb
*3 At screen gain 1.3/14ft-l
*4 Subject to installation conditions.

Top of this page

Specifications

Projection method 3-chip DLP chip reflection method
DLP chip specifications 1.2", 12° tilt angle, 2048 x 1080 pixels
Light Output *1 6,400Lumens*2
Supported screen sizes minimum
-at screen gain 1.3 / 14ft-l  4 meters (13 feet) *3
maximum -at screen gain 1.8 / 14ft-l 10 meters(32 feet) *2 *3
-at screen gain 1.3 / 14ft-l  8 meters (26 feet) *3
Contrast ratio 2000 : 1 or above (full on / off) (T.B.D)
Primary lenses 1.25 to 1.45:1 zoom "L2K-12ZM" (Note : select according to magnifications
of installation environment)
1.45 to 1.80:1 zoom "L2K-14ZM"
1.45 to 2.05:1 zoom "NC-50LS14Z"
1.60 to 2.40:1 zoom "NC-50LS16Z"
1.80 to 2.40:1 zoom "L2K-18ZM"
1.85 to 3.00:1 zoom "NC-50LS18Z"
2.15 to 3.60:1 zoom "NC-50LS21Z"
2.20 to 3.00:1 zoom "L2K-22ZM"
3.00 to 4.30:1 zoom "L2K-30ZM"
4.30 to 6.00:1 zoom "L2K-43ZM"
5.50 to 8.50:1 zoom "L2K-55ZM"
Lamp bulbs NEC High efficiency Xenon lamp bulb
  • NEC 1.25kW lamp bulb "IS8LP4-E" (4 pcs lamps package)
  • NEC 1.25kW low brightness lamp bulb "NC-8LP125L" (1 pc lamps package)
  * NEC 1.25kW High efficiency lamp bulb packed in the projector at the shipment of factory
*Standard film lamp bulbs cannot be used for NC800C
DLP Cinema functions CineLinkTM, CineCanvasTM, CinePaletteTM, CineBlackTM
Lens adjustment functions Motorized focus, zoom, horizontal/vertical shift*, light shutter(dowser)
*Range of motorized shift is dependent on lens
Cooling method
  • Air cooling system with dust preventing electro-static filter.
  • Total thermal dissipation : 7766BTU
  • Projector exhaust: 50CFM (cubic foot per minute)
Fan noise 45 dB (when set to low brightness mode)
Power supply voltage 100 to 120V or 200 to 240V AC, 50/60Hz, single phase
Rated input current 12A Max (100 to 120V)
8.5A Max (200 to 240V)
Power consumption 1200 to 1440W (100 to 120V)
1700W (200 to 240V)
Environment Operational temperatures 10°C to 35°C (41°F to 95°F), humidity : 10% to 80% (non-condensing)
Storage temperatures -10°C to 50°C (14°F to 122°F), humidity : 10% to 80% (non-condensing)
Regulations
  <Safety> <EMC>
USA UL60950 FCC Class A
Canada CSA60950 ICES-003 Class A
Europe EN60950 EN55022 Class A
EN55024-1998
EN61000-3-2
EN61000-3-3
Oceania IEC60950 AS/NZS 3548 Class A
1995+A 1/2:1997
Japan J60950 VCCI Class A
Asia EN60950 CISPR.Pub22
External dimensions Projector : 670 (W) x 752 (D) x 423 (H) (mm)
26.3 (W) x 30.1 (D) x 16.7 (H) (inch)
  * Excluding lens, lens hood and handle.
  * Pedestal for NC800C shall not be supplied by NEC.
Weight Projector : Approx.68kg / 150lb
  * Excluding lens.
  * Pedestal for NC800C shall not be supplied by NEC.
*Specifications are subject to change without prior notice.
*1 Measured at center screen
*2 This can be achieved using NEC high efficiency 1.25Kw lamp bulb "IS8LP4-E"
*3 Subject to installation conditions

Top of this page

Input / Output terminal

Type Name Description Quantity
Input Terminals HDSDI port BNC 2
DVI port DVI-digital 2
External
control
PC card slot For compact flash memory
card or wireless LAN card

1

LAN port RJ-45 2
USB port Type A 1
Serial port(RS-232C) D-sub (9-pin) 1
General Purpose Input / Output D-sub (37-pin) 1
Remote control connector Stereo mini 1

Top of this page

Standard supplied accessories *1

  • Remote control unit × 1
  • Cable for remote control unit (16 m / 629 inch) × 1
  • Cable for remote control unit(4m / 157 in.) × 1
  • User’s manual
  • Power cord for NC800C projector

Top of this page

Optional accessories *1

  • Lamp house module with a new lamp bulb for NC800C IS "IS8LH-E"
  • Touch panel controller "NC-TP6402" & Holder arm kit "NC-TH6403"(w/AC adapter)
     *Air filter for NC800C shall be supplied with NEC Optional lamp house and lamp bulb.
  • Anamorphic lens x1.25 "AL 1.25-E"*2 manual anamorphic turret "AS 1.25-E"
     *Automatic anamorphic lens turret is not available with NC800C.
  • Lens adapter for NEC primary lenses "NC-50LA01"
  • Multi-Media Switcher for alternative content
    MM2000, Standalone type Multi-Media Switcher
     *Video Input Board and Analogue RGB Input Board are included in MM2000 Multi-Media Switcher.
     *MM2000B, Built-in type Multi-Media Switcher is not available with NC800C.
     *Standalone type Multi-Media switcher with Video input & Analogue RGB input "MM2000"
      【Optional Input Boards for Multi-Media Switcher】
    • Single HD/SDI Input Board "MM-SDI-E"
    • DVI-D Input Board "MM-DVI-E"
    • Analogue RGB Input Board "MM-RGB-E"
    • Video Input Board "MM-VIDEO-E"
      ・Pedestal for NC800C shall not be supplied by NEC.
*1 Standard supplied accessories and Optional accessories are subject to change without notice.
*2 Anamorphic lens cannot be used with following primary lenses due to the limitation of the anamorphic lens
    (for NC800C)
  • 1.25 to 1.45:1 zoom "L2K-12ZM"
  • 1.45 to 1.8:1 zoom "L2K-14ZM"
For Cinema Scope (CS) display with usage of above primary lenses, please use "scaling" function by masking top and bottom side of the screen without anamorphic lens.
If actual lens magnifications for CS display doesn't fit the attached primary lens, please change into a primary lens fittable for CS display.

Top of this page

Dimensions

Dimensions

Top of this page

System configration

System configration

DLP, DLP Cinema and their respective logos are registered trademarks or trademarks of Texas Instruments.
CineLink,CineCanvas,CinePalette and CineBlack are trademarks of Texas Instruments.
All other trademarks are the property of their respective owners.

Top of this page


End of main content.
Copyright NEC Display Solutions, Ltd. All rights reserved.