Beginning of this page.
Jump to main content.

Please note that JavaScript and style sheet are used in this website,
Due to unadaptability of the style sheet with the browser used in your computer, pages may not look as original.
Even in such a case, however, the contents can be used safely.

NEC NEC Display Solutions, Ltd.
Site menu starts here.
Skip site menu.
End of site menu.
Displaying present location in the site.
Home > DLP Cinema Projector > Series 2 DLP Cinema Projectors NC1200C
Menu starts here.
Skip menu.
End of menu.
DLP Cinema Projector NC1200C

Specifications

Model Name NC1200C
Projection system 3 chip DMD reflection method
DLP® Chip specifications
(size and resolution)
0.98 inches, 2048 x 1080
Brightness 9,700lm with USHIO DXL-20SN3 lamp
Supported Screen Sizes(maximum) Width 14m / 46ft *1
Contrast Ratio 2200:1 (full on/off)
Primary lens (option) NC-60LS12Z 1.2 to 1.8:1 zoom
NC-60LS14Z 1.4 to 2.05:1 zoom
NC-60LS16Z 1.59 to 2.53:1 zoom
NC-60LS19Z 1.9 to 3.25:1 zoom
NC-60LS24Z 2.4 to 3.9:1 zoom
NC-60LS39Z 3.9 to 6.52:1 zoom
Lens adjustment function Motorized focus, zoom, horizontal/vertical shift, light shutter (dowser) / Lens memory stores lens setting (shift/zoom/focus) / Range of shift is dependent on lens
Lamp Bulbs NEC certified digital Xenon lamp bulbs 2.0kW
Compatible standard film projector lamp bulbs
Cooling Method ・ Liquid cooling inside, air cooling with dust-preventing electrostatic filter
・ Total thermal dissipation: 13000BTU
・ Projector exhaust: Top mounted
・ Demand of exhaust dust: 350CFM (10m3/min)
External Controls LAN port [RJ-45] x 1 / USB port [Type A] x 1 / Serial port (RS-232C) [D-sub(9-pin) x 1 / General Purpose I/O [D-sub (37-pin)] x 1 / General purpose I/O for 3D (D-sub [15-pin] x 1)
Input Terminals HD-SDI port [BNC] x 4 / DVI port [DVI-digital] x 2
Noise level Less than 62 dB
Power Supply For C1 connections *2 200 to 240V AC 50/60Hz single phase,
(Projector power supply + Lamp power supply)
For C2 connections *3 100 to 240V AC 50/60Hz single phase(Projector power supply)
200 to 240V AC 50/60Hz single phase (Lamp Power Supply)
Operating environment Operational temperatures: 50°F - 95°F / 10°C - 35°C   Humidity: 10% - 85% (non-condensing)
Storage temperatures: 14°F - 122°F / -10°C - 50°C    Humidity: 10% - 85% (non-condensing)
Regulations USA: UL60950 FCC Class A / Canada: CSA60950 ICES-003 Class A /
Europe: EN60950 EN55022 1988. Class A/EN55024-1998/EN61000-3-11/EN61000-3-12 (Marking: TUV-GS, CE) /
Oceania: EN60950 AS/NZS3548 Class A 1995/+A 1/2:1997 / Japan: J60950 VCCI Class A (Marking PSE, S-TUV) /
Asia: EN60950 CISPR Pub22 / Korea: K00022 Class A/K00024/K61000-3-11 (Marking IMC)
External Dimensions 27.6 x 39 x 19.8inch /700 x 990 x 503mm   Excluding lens, lens hood and exhaust stack. Including feet
Weight 203lbs. / 92kg (excluding lens and lamp bulb)
*1 : Subject to installation conditions. Maximum screen size is under the conditions of 14-ft-L @ screen gain 1.8
*2 : When the AC power to the projector power supply and the lamp power supply are provided by a single cable
*3 : When the AC power to the projector power supply and the lamp power supply are provided by separate cables
Specifications are subject to change without prior notice.

External Diagram

External Diagram

Top of this page


End of main content.
Copyright NEC Display Solutions, Ltd. All rights reserved.