Installation model meets the requirement for large screens in exhibitions and large venues with easily adjustable stacking function as well as high brightness and high image quality.
Functions and Features
Achieves High Brightness and High Image Quality
Projection of large images with a high brightness of 11000 lm
When you need higher brightness, up to 44000 lumens can be achieved by stacking projectors and using the stacking software.
- ＊When using four projectors. This will vary depending on factors like installation environment.
3-chip DLP system for high image quality
To produce high quality images, a 3 chip DLP system is used. This system produces lifelike image tones. The rich colour gradation reproduction improves the initial picture quality.
WUXGA (1920×1200) panel compatible with full HD displays
Utilises a high resolution WUXGA panel that enables the reproduction of even high-quality full HD content in its original beauty.
Cinema quality video using Hollywood Quality Video processing
HD-like vivid and crisp DVD images can be projected through Hollywood Quality Video which excels at following points and enrich your cinematic experience.
- Random and Mosquito Noise Reduction
- Video and Film Cadence Detection (3:2 and 2:2 pull down)
- Per-pixel Motion Adaptive Deinterlacing
- Detail Enhancement
- Full 10-bit processing, scaling and warping
|3 : 2 Pull down Detection||Diagonal Interpolation to remove "jaggies"|
New installation features
Supports dual layers stacking
Stacking to two layers can be facilitated by using the supplied columns. In this case, 22000 lumens of high brightness projection is available.
Five types of lenses available to suit the projection distance
Five types of lenses are available, from short focal types to long focal types. Since it accommodates screen sizes from 80 to 500 inches, you can choose lenses to suit the installation environment.
- *The lenses are not included with this unit.
Lens shutter that lets you blank the projected image when necessary
Lens memory function can adjust image to a preset memorized position using the inbuilt signal table even if the signal input changes
When the input is switched, the image displayed before switching is held so that you can see smooth image changing without black image.
This feature adjusts the image when projecting onto specially shaped screen as below to expand your installation options.
Multi screen function allowing for near seamless joins between screens
There are two methods to do this. One method involves no limit on the number of the projectors that can be used and that there is no limit to the display resolution. Manual edge blending is a standard function of the projector. *1
Another method, easy installation than the first method can also be used. It uses the detection of image distortion by use of a web camera and software, whereby the software will automatically perform the distortion correction.
- *1This method requires a high degree of installation precision and an appropriate graphics board that support edge blending is required.
Expandability for future-proofing your investment
An option slot to support next generation expansion modules including OPS-compliant SBCs and HD SDI card
Wide range of input/output terminals such as HDMI and DisplayPort
Compatible with PJLink and AMX beacon
PC Control Utility Pro 4* is compatible with Windows 7/Vista/XP
Compatible with wired LANs and wireless LANs (optional)
Dual lamp can support 24/7 operation
|Lens type||Fixed Short
|Zoom/Focus||Manual focus||Powered zoom and focus|
|Throw Ratio||0.67:1||0.9-1.1:1||1.39-1.87 : 1||1.87-2.56 : 1||2.56-4.16 : 1||4.16-6.96 : 1|
|Screen Size||80-200 inches||40-800||100-500 inch|
|Light Output||10300 ANSI lm||10600 ANSI lm||10600 ANSI lm||11000 ANSI lm||10100 ANSI lm||9800 ANSI lm|
|Vertical||0||-0.4 V to +0.5 V||-0.4 V to +0.55 V|
|Weight||6.5 kg||4.5 kg||6.0 kg||5.0 kg|
Terminal Panel (The panel is illuminated by LEDs)
Lens shift range
Throwing Distance and Screen Size (Aspect ratio 16:10)
|Lens model name|
|40" (0.86 x 0.54)||-||0.7-0.9||-||-||-||-|
|60" (1.29 x 0.81)||-||1.1-1.4||-||-||-||-|
|80" (1.72 x 1.08)||1.1||1.5-1.9||-||-||-||-|
|100" (2.15 x 1.35)||1.4||1.9-2.3||2.9-4.0||4.0-5.5||9.0||12.0-15.0|
|120" (2.59 x 1.62)||1.7||2.3-2.8||3.5-4.8||4.8-6.6||9.0-10.8||12.0-18.0|
|150" (3.23 x 2.02)||2.2||2.9-3.5||4.4-6.0||6.0-8.2||9.0-13.5||13.5-22.4|
|200" (4.31 x 2.69)||3.0||3.9-4.7||5.9-8.0||8.0-11.0||11.1-17.9||17.9-29.8|
|240" (5.17 x 3.23)||-||4.7-5.7||7.1-9.6||9.6-13.2||13.3-21.4||21.4-35.7|
|300" (6.46 x 4.04)||-||5.9-7.1||8.9-12.0||12.1-16.6||16.5-26.8||26.7-44.5|
|400" (8.62 x 5.39)||-||7.9-9.5||11.9-16.1||16.1-22.1||22.0-35.6||35.5-59.3|
|500" (10.77 x 6.73)||-||9.9-12.0||14.9-20.1||20.2-24.0||27.4-44.5||44.3-74.0|
|600" (8.62 x 5.39)||-||11.9-14.4||-||-||-||-|
|800" (10.77 x 6.73)||-||15.9-19.2||-||-||-||-|
- *The values in the tables are design values and may vary.
|Projector Type||3 chip DLP|
|DLP Size||0.96 inches (Aspect Ratio 16:10)|
|Resolution *1||1920 x 1200 pixels|
|Lens||See the chart of Throw Distance and Screen Size|
|Lens Shift *2
(NP26ZL, NP27ZL, NP28ZL, NP29ZL)
|Vertical : Max -0.4 to +0.55, Horizontal : Max±0.2|
|Lamp (Eco Mode On / Eco Mode Off)||320 W / 400W AC|
|Lamp Life *3 (Eco Mode On / Eco Mode Off)||2500 H / 2000 H|
|Image Size (Projection Distance)||See the chart of Lens specifications|
|Colour Reproduction||10-bit signal processing (1.07 billion colours) |
(VIEWER, NETWORK : 16.7 million colours)
|Light Output *4 *5
|Eco Mode Off||11000 ANSI lumens|
|Eco Mode On||Approx. 75% of Eco Mode Off|
|Contrast Ratio (White / Black) *6||2000:1 (with dynamic contrast on)|
|Maximum Resolution||WUXGA (1920 x 1200)|
|Scan Rate||Horizontal||15kHz to 108kHz (RGB : 24kHz or over) |
conforms to the VESA standard
|Vertical||48Hz to 120Hz (HDMI : 50Hz to 85Hz) |
conforms to the VESA standard
|Keystone Correction||Horizontal||Manual Approx.±Max 35 degrees|
|Vertical||Manual Approx.±Max 30 degrees|
|Input Terminals||Computer/Component||2 x D-Sub Mini 15-pin (1&2 IN), 1 x 5 BNC (3 IN)|
|HDMI||1 × HDMI Type A|
|DisplayPort||1 × DisplayPort|
|S-Video||1 × Mini DIN 4-pin|
|Video||1 × BNC|
|Output Terminals||D-Sub Mini 15-pin (only computer 1 input can be output)|
|USB Port||1 × Type A (for mouse, keyboard, USB memory)|
|Wireless LAN (USB Port)||1 ×Type A|
|Wired LAN Port||1 × RJ-45 (10BASE-T / 100BASE-TX)|
|Control Terminals||Remote||1 × Stereo Mini Jack|
|PC Control||1 × D-sub 9-pin|
|Environment||Operational Temperatures||0°C to 40°C ([ECO MODE] is set automatically to [ON] at 35°C to 40°C), |
20% to 80% Humidity (non-condensing)
|Storage Temperatures||-10°C ～ 60°C, 20% to 80% Humidity (non-condensing)|
|Power Requirement||100 to 240 V AC, 50 Hz/60 Hz|
|Input Current||11.2 A (100-130 V) - 5.4 A (200-240 V)|
(100 to 130 V AC /
200 to 240 V AC)
|Eco Mode Off Dual (Single)||1100 W / 1050 W (600 W / 580 W)|
|Eco Mode On Dual (Single)||880 W / 840 W (500 W / 490 W)|
|Standby Mode||Normal||90 W|
|Network Standby||60 W|
|Calorific Value||3754BTU (Max)|
|Dimensions (W x H x D)||558 mm x 235 mm x 578 mm (not including protrusions）|
|Weight (Not including Lens)||39.5 kg|
|Gross Dimensions (W x H x D)||700 mm x 333 mm x 653 mm|
|Gross Weight||50.5 kg|
|Accessories||Remote control, Batteries (AA x 2), |
CD-ROM (User's manual), Quick setup guide, Important information
Anti-theft cap for LAN unit, Power cord stopper
|Regulations||For United States||UL Approved (UL 60950-1), Meets FCC Class A Requirements|
|For Canada||C-UL Approved (CSA 60950-1), Meets DOC Canada Class A Requirements|
|For Europe||Meets EMC Directive (EN55022 Class A, EN55024, EN61000-3-2, EN61000-3-3), |
meets Low Voltage Directive (EN60950-1, TÜV GS approved)
|For Asia/Oceania||IEC60950-1, Meets AS/NZS CISPR.22 Class A|
|For Korea||KC (safety : K60950-1, EMC : K00022, K00024, K61000-3-2)|
|For China||GB4943, GB9254, GB17625.1|
|For Russia||Gost R 60950-1, 51318.22, 51317.3.2./3.3.|
|For Saudi Arabia||SASO IEC60950-1|
- *1:Effective pixels are more than 99.99%.
- *2:The Lens Shift function is not available for the NP25FL.
- *3:Lamp life is defined as the average time span for the brightness of the lamp to be reduced by half, it does not refer to the warranty period for the lamp.
- *4:This is the light output value (ANSI lumens) when the [PRESET] mode is set to [HIGH-BRIGHT]. If any other mode is selected as the [PRESET] mode, the light output value may drop slightly.
- *5:Compliance with ISO21118-2005
All specifications are subject to change without notice.
Remote Control (included accessory)
|Wireless LAN unit *
|Option lens |
NP25FL NP32ZL NP26ZL
NP27ZL NP28ZL NP29ZL
Replacement filter NP03FT
1.5G HD/SD-SDI board SB-01HC
3G/HD/SD-SDI board SB-04HC
- *Model name of the wireless LAN unit varies depending on the country where the unit is used (or to be used).
Further information: Table of Supported Areas and Countries for Wireless LAN Unit
This product may not be available in some regions.
Model codes, specifications and available options may differ by region.
For detailed information, please contact the NEC sales company or dealer in your area.
The images in this web site are samples.
HDMI, the HDMI Logo and High-Definition Multimedia Interface are trademarks or registered trademarks
of HDMI Licensing LLC.
DisplayPort and DisplayPort Certified Logo are trademarks of the Video Electronics Standards Association, registered in the U.S. and other countries.
Crestron and Crestron RoomView are trademarks or registered trademarks of Crestron Electronics,Inc.
Trademark PJLink is a trademark applied for trademark rights in Japan, the United States of America
and other countries and areas.
All brand and product names are registered trademarks of their respective holders.
Further trademark information