This is the top of the page.
Displaying present location in the site.
  1. Home
  2. Projector
  3. Installation
  4. PH3501QL / PH2601QL
Main content starts here.

PH3501QL / PH2601QL

Professional Installation Projectors with Laser Light Source
PH3501QL / PH2601QL Laser Projector

Powerful 3-chip 1.38" DLP installation projectors with the latest RB laser light source supports new, demanding projection conditions and achieve a high brightness of 40,000 centre lumens*, a high resolution and a wide colour gamut.

  • *PH3501QL

PH3501QL / PH2601QL

DLP Medalion

HDBaseT HDMI DisplayPort

PH3501QL / PH2601QL

  • *Not including lens and NP-LV01BD

Functions and Features

High Brightness, High Resolution and Wide Colour Gamut

High Brightness by NEC’s Unique Light Source Design

Employing a highly heat-resistant phosphor wheel and highly reliable phosphor material, the projectors bring hassle free operation without light source replacement for up to 20,000 hours*. In addition, NEC’s unique light source design (RB Laser) achieves a high brightness of 40,000 center lumens** and a wide colour gamut at the same time.

  • *Time at which the laser light source is at half brightness; not a guarantee time.
  • **PH3501QL

High Resolution of True 4K

High Resolution of True 4K

The projectors employ a 1.38" True 4K (4,096 × 2,160) DLP chip that faithfully reproduces the input video by using a massive number of pixels to display 4K video dot-by-dot.

Dust Proof / Smoke Proof Optical Unit

The optical engine and laser light source unit have been designed to be completely sealed. This prevent microscopic particles like a smoke from intruding into the sealed optical unit and adhering to the optical components, which provides high reliability.

A dustproof design supported by NEC’s unique closed-loop cooling system

The Wide Colour Gamut that covers DCI-P3

The red and blue laser sources and green phosphor create the three primary colours. Thanks to this technology, the projector can output the DCI-P3 colour space without any filter to increase chromatic purity. In NEC’s unique laser-beam source layout, the high brightness and the wide colour gamut are compatible. It encompasses the colour gamut of ITU-R BT.709 and DCI-P3, which expands the possibilities of the picture production through the overwhelming colour gamut.

Multiscreen function

Cinema Quality Picture

Cinema Quality Picture

NEC’s unique video processor, which was developed with technology that was fostered in development of the Digital Cinema Projector and image processing knowledge that was accumulated over the long-term, brings excellent picture quality through rich gradation expression and high-definition through advanced video processing technology.

Other Features

  • Mechanical shutter to protect DMD and optical parts
  • Easy of lift
  • Metal Filter - No replacement required
  • ITU-R BT.2020-compatible support through emulation mode and HDR support
  • Rich 4K applicable interface and OPS slot option for expandability
  • Advanced colour calibration appropriate for the installation environment
  • User-generated 4K logo images can be registered
  • Widest application support portrait mode projection, 360 degree free tilt installation, and unique geometric adjustment offers unrivalled installation capability
  • Picture by picture function

Specifications

Model NP-PH3501QL NP-PH2601QL
Method Reflection by 3 chip DMD
Specifications of main parts Main panel Size/Pixels*1 1.38", aspect ratio: 17:9 / 8,847,360*1 ( 4,096 dots × 2,160 lines)
Projection lenses Zoom/Focus/
Lens shifting
Powered
Light source  Red & Blue: Laser diode / Green: Phosphor
Light source recommended replace time
*2
FAN AUTO mode 20,000 hours (50% brightness)*2 20,000 hours (50% brightness)*2
FAN LOW mode 17,000 hours (50% brightness)*2 20,000 hours (50% brightness)*2
Brightness *3*4 40,000 centre lumens*5
(35,000 lumens)
30,000 centre lumens*5
(26,000 lumens)
Contrast ratio (White / Black) 30,000:1 with dynamic contrast
Quietness FAN AUTO mode 55 dB
FAN LOW mode 53 dB
Input connectors PC control terminal D-Sub 9-pin × 1 (RS-232C)
USB port USB type A × 1 (Service terminal)
LAN port (Ethernet) RJ-45 × 1 ( Wired LAN)
REMOTE terminal Stereo mini jack × 1
3D D-Sub 15-pin × 1 (Available in the future)
External control terminal D-Sub 37-pin × 1 (GP I/O port)
Usage environment Operating temperature 5 to 40°C*6, operating humidity: 10 to 85% (Non-Condensing)
Storage temperature –10 to 50°C, storage humidity: 10 to 85% (Non-Condensing)
Operating altitude 0 to 2,600 m
Power supply 200 – 240 V AC, 50 / 60 Hz
Power consumption with
NP-LV01BD
Normal 4,705 W 3,665 W
Standby ( NORMAL) 205 W
Input current Single: 30 A / Dual: 4.9 A + 25.1 A
Dimensions (W × D × H) 697 × 1,180 × 455 mm (Not including protruding portions and lens)
Weight 169.0 kg (Not including lens and NP-LV01BD)
Model NP-LV01BD
Colour reproducibility 10-bit colour processing (approx. 1.07 billion colours)
Maximum display resolution
(horizontal × vertical)
Digital 4K (4,096 × 2,160), Pixel clock frequency: less than 600 MHz
Keystone
correction
Horizontal Manual, Approx. ± 40 Max degrees
Vertical Manual, Approx. ± 30 Max degrees
Scanning
frequency
Horizontal (Digital) 15 kHz, 24 to 153 kHz to VESA standard
Vertical (Digital) 23.98, 24, 25, 29.97, 30, 48 Hz, 50 to 85 Hz, 100, 120 Hz to VESA standard
Input terminal HDMI® Video input Type A 19-pin × 2
Deep Colour: 8 bit, 10 bit, 12 bit, Colourimetry: RGB, YCbCr444, YCbCr422 HDCP*6 1.4 / 2.2, Lip sync, 4K
DisplayPort™ Video input DisplayPort 20-pin connector × 1
Main Link rates: 5.4 Gbps / 2.7 Gbps / 1.62 Gbps per lane, Main Link: 1/ 2 /4 Lane Deep Colour: 6 bit, 8 bit, 10 bit, Colourimetry: RGB, YCbCr444, YCbCr422 HDCP*6 1.3
3G / HD /
SD-SDI
Video input BNC 1 pin × 4 (Single / Dual / Quad input)
Input signal: SMPTE259M / SMPTE292M / SMPTE424M
Colourimetry: RGB, YCbCr444, YCbCr422
HDBaseT™ (Ethernet) Video input RJ45 × 1, 100BASE-TX
Deep Colour: 8 bit, 10 bit, 12 bit, Colourimetry: RGB, YCbCr444, YCbCr422 Lip sync, 4K
Slot OPS compatible slot × 1
For mounting separately sold options (SBC)
Usage environment Operating temperature 5 to 40°C, operating humidity: 10 to 85% ( Non-Condensing)
Storage temperature –10 to 50°C, storage humidity: 10 to 85% ( Non-Condensing)
Operating altitude 0 to 2,600 m
  • *1:Effective pixels are more than 99.99%.
  • *2:Except Phosphor wheel, Diffuser motor and FAN in Light source unit, and “Not guaranteed”.
  • *3:Compliant with ISO21118-2012.
  • *4:Indicates the average value of all products at shipping.
    This is the light output value that results from setting [PRESET] to [HIGH-BRIGHT] and setting [LIGHT ADJUST] to [100%].
    If any other mode is selected for [PRESET], the brightness becomes lower.
  • *5:Measured at centre area of projector screen.
  • *6:If you are unable to view material via the HDMI DisplayPort or HDBaseT input, this does not necessarily mean the projector is not functioning properly.
    With the implementation of HDCP, there may be cases in which certain content is protected with HDCP and might not be displayed due to the decision or intention of the HDCP community.
    (Digital Content Protection, LLC).
  • This product is classified as Class 1 of IEC60825-1 Third edition 2014 and as RG3 of IEC62471-5 First edition 2015.
  • These specifications and the product’s design are subject to change
    without notice.

Terminals

Terminals

Cabinet dimensions

Cabinet dimensions

Optional lens specifications

Model name L2K-10F1 L4K-11ZM L4K-15ZM L4K-20ZM L2K-30ZM L2K-43ZM1 L2K-55ZM1
Lens Type Fixed Lens Zoom Lens Zoom Lens Zoom Lens Zoom Lens Zoom Lens Zoom Lens
Lens Memory No Yes
Zoom Powered
F# (Wide – Tele) 2.5 2.5– 2.5 2.5– 2.5 2.5– 2.5 2.5– 2.5 2.5– 2.5 2.5– 2.5
f 28.95 mm 38.5– 53.7 mm 47.5–65.6 mm 61.4–105.2 mm 85.0–121.63 mm 122.76–172.33 mm 156.54–243.12 mm
Throw ratio 0.99 1.33–1.84 1.62–2.24 2.11–3.57 2.89–4.19 4.17–5.88 5.33–8.34
Zoom Ratio 1.4 1.4 1.7 1.4 1.4 1.6
Screen Size 100"– 1000" 100"– 1000" 100"– 1000" 100"– 1000" 100"– 1000" 100"– 1000" 100"– 1000"
Light Output NP-PH3501QL 35,000 lm 36,100 lm 35,900 lm 35,000 lm 31,700 lm 31,500 lm 31,300 lm
NP-PH2601QL 26,000 lm 26,800 lm 26,700 lm 26,000 lm 23,500 lm 23,400 lm 23,300 lm
Lens Shift
@3840 × 2160
Vertical +0.34 V to
–0.34 V
+0.55 V to
–0.55 V
+0.55 V to
–0.55 V
+0.55 V to
–0.55 V
+0.34 V to
–0.34 V
+0.34 V to
–0.34 V
+0.37 V to
–0.37 V
Horizontal +0.12 H to
–0.12 H
+0.22 H to
–0.22 H
+0.22 H to
–0.22 H
+0.22 H to
–0.22 H
+0.12 H to
–0.12 H
+0.12 H to
–0.12 H
+0.14 H to
–0.14 H
Weight 6.8 kg 8.6 kg 7.7 kg 8.9 kg 7.0 kg 7.1 kg 7.6 kg

Note) Throw Ratio is 3,840 × 2,160 output value.

Accessories

Remote control (Included accessory)

Options

NP-LV01BDLV Kit
NP-LV01BD*
(Essential optional product)
* Be sure to use this projector in combination with the NP-LV01BD.

HDBaseT HDMI DisplayPort

Optional Lenses
L2K-10F1
L4K-11ZM
L4K-15ZM
L4K-20ZM
L2K-30ZM
L2K-43ZM1
L2K-55ZM1

  • *This device is used in combination with NP-LV01BD (sold separately) and the projector main unit.
  • *The picture sent from the connected device is then projected onto the screen.
  • *Note that it cannot be used with just the projector main unit.
  • *This brochure explains mainly the operation of the PH3501QL used in combination with NP-LV01BD.

Cinema Quality Picture logo is a trademark or registered trademark of NEC Display Solutions, Ltd. in Japan, in the United State and other countries.
The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing Administrator, Inc. in the United States and other countries.
DisplayPort, DisplayPort logo and VESA are trademarks owned by the Video Electronics Standards Association in the United States and other countries.
HDBaseT and the HDBaseT Alliance logo are trademarks of the HDBaseT Alliance. DLP and the DLP logo are trademarks or registered trademarks of Texas Instruments in the United States and other countries.
All other brand or product names are trademarks or registered trademarks of their respective holders.
All specifications are subject to change without notice. May, 2018
©2018 NEC Display Solutions, Ltd.
Further trademark information

Top of this page