Capable of projecting on a large screen in a wide venue even with a compact body*
    * : Depending on the use environment
  • Wall Colour correction adjusts the colour tones when images are projected on a wall.
  • The lamp life has been extended by introducing the switchable lamp mode.
  • The mouse operation on a PC can be made through the remote control.
  • Security function prevents unauthorized use
  • Low noise design
  • Employing the built-in monaural speaker

A portable, compact body with sufficient brightness for large screen presentations in large conference rooms. Light and easy-to-use, the projector is a convenient business tool for use anywhere, anytime.

Functions and Features

With the auto focus function, the projector can be set up easily and quickly.

1.Insert the power cord into the outlet.
2.Set the projector in the proper position.
3.Start projecting images by automatically adjusting the focus and correcting any trapezoidal distortion.
With the auto focus function, the projector can be set up easily and quickly.

projection starts immediately after inserting the power cord into an outlet
Auto power on

By inserting the power cord into an outlet, projection will start immediately without pressing the power button. If the initial input selection is set to Auto, simply by turning on the power, the projector automatically judges the input signal and projects the images.

manual focus adjustment is not required
Auto focus

When turning on the power, adjusting the zoom operation, or removing the main unit, the focus sensor measures the distance between the projector and the screen and adjusts the focus of the projected images automatically.

correcting any trapezoidal distortion in the projected images
Auto Vertical Keystone Correction

Auto Vertical Keystone CorrectionIf the projector is installed at an angle to project images on a screen, it may result in trapezoidal distortion of the projected images. In this case, the acceleration sensor built into the main unit senses the inclination of the unit in the vertical direction and then corrects for any trapezoidal distortion in the projected images automatically to project square images.
(+/- 40 degrees from the projection angle).

Top of this page

A sliding lens cover is employed

A sliding lens coverThe opening and closing of the lens cover is connected to the AV mute function, so when the lens cover is closed during projection, the image and sound are stopped. This is a very useful function when you want to stop the use of the projector during a meeting.

Top of this page

Carbon meter for visualizing ecology

Carbon meterThe projector employs the Carbon Meter indicating the reduced amount of CO2 emissions in Eco Mode. Visually confirm the numerical value indicating the reduction in CO2 emissions in comparison with Eco Mode Off operation.

Top of this page

Direct power off function makes it possible to put the projector away very quickly

Direct power off function makes it possible to put the projector away very quicklyIt is possible to turn off the power of the projector by using the power supply tap with a switch during projecting images or after turning off the main power even if the cooling fan is still operating. Since it is not necessary to wait for the cooling fan to stop, the projector can be promptly put away.

Top of this page

Projecting images with more vivid colours

By employing the colour wheel with six segments (red, green, blue, cyan, white and yellow) and BrilliantColor with superior reproducibility of neutral colours, images of natural scenery can be projected more vividly.
Furthermore, variable colour reproduction according to the purposes of use is available by employing Variable Illumination, a technology varying the lamp intensity being irradiated to the respective segments of the colour wheel. NEC provides a setting that emphasizes the colour yellow.Projecting images with more vivid colours

The above illustrations are for display purposes only and differs from the actual product.

Top of this page

USB Memory Viewer Function is employed (NP64/NP54)

USB Memory Viewer FunctionProject image data saved on a USB memory device using the viewer function of the projector. Turn the projected images and change the sequence of display directly with the projector. Since the time for switching thumbnail indications and playing the slideshow automatically can be set in advance, project images flexibly depending on the occasion.*¹ Furthermore, by connecting the optional Bluetooth® USB adapter (NP01BA)*² to the projector, images can be transmitted to the projector from a PC or mobile phone equipped with the Bluetooth® wireless technology.*³
*1: Image formats such as GIF, JPEG, PNG, and BMP can be projected.
*2: The Bluetooth® USB adapter (NP01BA) is a dedicated adapter for our projectors. The USB adapter (NP01BA) may not be available in some regions.
*3: It is impossible to save the received images. Confirm that the device transmitting images supports the profile of the Bluetooth® USB adapter (NP01BA) by referring to the operation manual of the transmission device in advance.

Terminal Panel


NP64/NP54Terminal Panel


NP63/NP43Terminal Panel

Top of this page

Throwing Distance and Screen Size

Throwing Distance and Screen Size

Screen Size
Throwing Distance (m) Bottom
Height (cm)
Wide Tele
33 - 1.44 7.0
1.45 1.76 8.5
60 2.20 2.66 12.7
2.94 3.56 16.9
3.69 4.46 21.2
120 4.43 5.36 25.4
5.55 6.71 31.8
180 6.67 8.06 38.1
200 7.42 8.96 42.4
240 8.91 10.75 50.8
300 11.14 13.45 63.6
The values in the tables are design values and may vary.

NEC Projector Throw Distance Calculator : A link is opened in a new window. NP64/NP63/NP54/NP43

Top of this page


model name NP64 NP63 NP54 NP43
DLP Chip 0.55 inch DLP (Aspect Ratio 4:3)
Resolution*1 1024 x 768 pixels
Lens Manual Zoom (Zoom ratio 1 to 1.2) / Auto Focus*2 (Effective Range : 1.5m to 5.5m), Manual Focus F2.2-2.34, f=20.4-24.5mm
Lamp (Eco Mode On / Eco Mode Off) 170W / 220W AC 170W / 200W AC
Lamp Life*3 (Eco Mode On / Eco Mode Off) 3500H / 2500H
Image Size (Projection Distance) 33 to 300 inch (1.44m to 13.45m)
Colour Reproduction 16.7 million colors simultaneously, Full colours
Light Output*4*5 Eco Mode Off 3000 ANSI lumens 2600 ANSI lumens 2300 ANSI lumens
Eco Mode On Approx.75% of Eco Mode Off Approx.85% of Eco Mode Off
Contrast Ratio (White / Black)*5 1600:1
Maximum Resolution UXGA (1600 x 1200) with scaling technology
Scan Rate Horizontal 15kHz to 100kHz (RGB : 24kHz or over)
Vertical 50Hz to 120Hz
(Signals with higher than refresh rate 85 Hz support resolutions of 1024 x 768 or lower.)
Keystone Correction Vertical Auto/Manual Approx.±Max 40 degrees
Input Terminals 1 Computer Input 1 D-Sub Mini 15pin VGA, SVGA, XGA, WXGA, SXGA, SXGA+, UXGA
RGB : 0.7Vp-p/75Ω
H/V Sync : 4.0Vp-p/TTL Level
Composite Sync : 4.0Vp-p/TTL Level
Sync on G : 1.0Vp-p/75Ω(with Sync) Negative Polarity
1 Stereo Mini Jack  Stereo L/R 0.5Vrms/22kΩ or over
1 Component Input 1 D-Sub Mini 15pin
(Shared with Computer IN)
Y : 1.0Vp-p/75Ω(with Sync)
Cb, Cr (Pb, Pr) : 0.7Vp-p/75Ω
Compatible signals : 480i, 480p, 720p, 1080i/60Hz, 576i, 576p, 1080i/50Hz
DVD Progressive (50/60Hz)
Audio Input is Shared with Computer IN Same as Computer IN
1 S-Video Input 1 Mini DIN-4pin Y : 1.0Vp-p/75Ω
C : 0.286Vp-p/75Ω
Audio Input is Shared with Computer IN Same as Computer IN
1 Video Input 1 RCA pin Compatible Video : 1.0Vp-p/75Ω
Compatible signals : NTSC/NTSC4.43/PAL/PAL-N/PAL-M/PAL-60/SECAM
Audio Input is Shared with Computer IN Same as Computer IN
USB Port Type A USB2.0
(for USB memory)
- USB2.0
(for USB memory)
Wireless communication Supports Bluetooth® wireless
communication technology
(Connect optional NP01BA*6
adapter to the USB port)
- Supports Bluetooth® wireless
communication technology
(Connect optional NP01BA*6
adapter to the USB port)
Control Terminals PC Control 1 Mini DIN-8Pin RS-232C
Built-In Speaker 0.3W Monaural
Quietness (Eco Mode On / Eco Mode Off) 32dB / 37dB
Environment Operational Temperatures 5°C to 40°C ([ECO MODE] is set automatically to [ON] at 35°C to 40°C / [ECO MODE] is set automatically to [ON] at 30°C to 40°C when used in HIGH ALTITUDE),
20% to 80% Humidity (Non-Condensing)
Storage Temperatures -10°C to 50°C, 20% to 80% Humidity (Non-Condensing)
Power Requirement NP64 : 100 to 240V AC, 50Hz/60Hz NP63G/NP63+ : 200 to 240V AC, 50Hz/60Hz NP54G/NP54+ : 200 to 240V AC, 50Hz/60Hz NP43 : 100 to 240V AC, 50Hz/60Hz
NP43G/NP43+ : 200 to 240V AC, 50Hz/60Hz
Input Current NP64 : 3.2A - 1.4A NP63G/NP63+ : 1.5A NP54G/NP54+ : 1.5A NP43 : 2.8A - 1.2A
NP43G/NP43+ : 1.4A
Eco Mode Off 100 - 130V 292W 287W 268W 266W
200 - 240V 277W 272W 255W 252W
Eco Mode On 100 - 130V 223W 221W 224W 221W
200 - 240V 213W 212W 214W 212W
Power-saving Mode 100 - 130V 3.2W
200 - 240V 3.7W
Heat Dissipation 996BTU (Max) 979BTU (Max) 914BTU (Max) 908BTU (Max)
Dimensions (W x H x D) 246mm x 72mm x 182㎜ (Not Including Protrusions, with Lens Cover Open)
Weight 1.7kg
Accessories Remote control, Signal cable (MiniD15-MiniD15), Power cable, Soft case, User's manual(CD-ROM), Quick setup guide, Important information
Regulations For United States UL Approved (UL 60950-1), Meets FCC Class B Requirements
For Canada C-UL Approved (CSA 60950-1), Meets DOC Canada Class B Requirements
For Asia/Oceania IEC60950-1, Meets AS/NZS CISPR.22 Class B
For Korea KC (safety : K60950-1, EMC : K00022, K00024, K61000-3-2)
For China GB4943, GB9254, GB17625.1
For Russia Gost R 60950-1, 51318.22, 51317.3.2./3.3.
*1 : Effective pixels are more than 99.99%.
*2 : Auto focus functions are accurate within the range of approximately 1.5m to about 5.5m. If the throwing distance is 1.5m, the screen size is 33 inches, while at a distance of 5.5m, the screen size is 149 inches. If the distance from the projector to the screen exceeds 5.5m, the focus must be adjusted manually. Depending on the colour of the screens or other environmental conditions, the operational range may be narrowed or the equipment may not operate properly. If a transparent screen is used, malfunctions may occur. Obstacles between the screen and the projector may cause the focus sensor to malfunction. When the main unit is moved slowly, this function may not activate. If the screen is moved, this function may not activate.
*3 : Lamp life is defined as the average time span for the brightness of the lamp to be reduced by half, it does not refer to the warranty period for the lamp.
*4 : This is the light output value (ANSI lumens) when the [PRESET] mode is set to [HIGH-BRIGHT]. If any other mode is selected as the [PRESET] mode, the light output value may drop slightly.
*5 : Compliance with ISO21118-2005
*6 : The Bluetooth® USB adapter (NP01BA) is a dedicated adapter for our projectors. The USB adapter (NP01BA) may not be available in some regions.
All specifications are subject to change without notice.

Top of this page



Top of this page



Replacement lamp
NP09LP (for NP64/NP63)

Replacement lamp NP09LP(for NP64/NP63)

Replacement lamp
NP08LP (for NP54/NP43)

Replacement lamp NP08LP(for NP54/NP43)

Ceiling mount kit

Ceiling mount kit NP02CM


Bluetooth® USB adaptor NP01BA (for NP64/NP54)

USB adaptor NP01BA

Soft Case
(basic accessory)

Soft Case

Top of this page

  • The projector can be unplugged during its cool down period after it is turned off.
    Parts of the projector will become heated during operation. Use caution when picking up the projector immediately after it has been operating.
  • Use caution when putting the projector in the soft case immediately after the projector has been operating. The projector cabinet is hot.

This product may not be available in some regions.
Model codes, specifications and available options may differ by region.
For detailed information, please contact the NEC sales company or dealer in your area.

The images in this web site are samples.
All brand and product names are registered trademarks of their respective holders.
Further trademark information