Firmware Update
Overview
This download page is for Firmware in the displays.
Supported Displays
PA271Q
Update History
- Rev.1.3
- The picture uniformity and low luminance stability are improved.
- Shipment setting is changed with destination (160cd/m2 ; for US version only).
Checking the Necessity of Firmware Update
Check the Firmware version of the display from "OSD - INFORMATION - System information" on screen menu.
If either of the versions is older than the following versions, needs to update the Firmware.
Firmware Version |
---|
Rev.1.3 REVISION:R1.302 |
OSD Sytem Information
You can check the REVISION of your Firmware on the following OSD screen.
Updating
Updating Procedure by USB Memory.
Preparation
- USB Memory (Not supplied)
Updating of the firmware by USB memory depends Follow the instruction below to update the Firmware.
File Name | File Size |
---|---|
Firmware Update Procedure by USB Memory PA271Q_Firmware_Update_Procedure_by_USB_E.pdf |
109KB |
Go to Download
Note: Download the compressed file from below and unzip the FIRMWARE image file.
The unpacked file includes the following one image file (PAC file).
File Name | Unpacked File Name |
---|---|
Rev.1.3 Firmware download file PA271Q_R1302.zip (2.04MB) |
PA271Q_R1302.pac |