This is the top of the page.
Displaying present location in the site.
  1. Home
  2. Download
  3. Projector
  4. Software & Driver
  5. Software
  6. Geometric Correction Tool 3.0
Main content starts here.

Geometric Correction Tool 3.0

Disclaimer
The Geometric Correction Tool 3.0 (hereafter referred to as "the software") is designed to expand the use of NEC projectors in unique settings. The software is not included with the projector and must be downloaded separately. Great care has been taken to ensure that the software will work properly. However, use conditions vary depending on projector you use, projector application, or signals used. For this reason, NEC Display Solutions does not warrant that the functions contained in the software will meet your requirements. Before using the software, read the ReadMe file which provides notes and operation procedures. In no event shall NEC Display Solutions be liable for loss of business or profits, or for any indirect, incidental or consequential damages arising from the use of or inability to use the software. The software is owned and licensed by NEC Display Solutions. The software and its related materials are provided " as is ".

Version : Ver. 3.03

Overview

The Geometric Correction Tool 3.0 (hereafter called " the software ") corrects geometrical distortion of an image projected onto a special shaped screen such as a cylindrical screen, and a spherical screen from an NEC projector. This program allows you to control the projector via a computer (hereafter called " PC ").

Correction point to Ver. 3.03

Ver. 3.02 → Ver. 3.03

  • Support of Windows Vista
  • Alter corporate name to NEC Display Solutions,Ltd.

Operating Environment

Supported Projector (MODEL NO.)

  • GT5000 / GT6000
  • HL16000HD(N)/HL16000Dsx+(N)/HL12000HD/HL10000HD/HL12000/HL8000Dsx+ * 1
  • HT1100 (Firmware version. 1.04 or later) * 2
  • LT260K / LT245K
  • LT265 / LT245
  • LT380 / LT280
  • MMS1000 * 3
  • MT1065 / MT1060 (Firmware version. 1.09 or later) * 4
  • MT1075
  • NP2000 / NP1000
  • VT770 (Firmware version. 1.03 or later) * 5

Do not apply this software to the model which is not listed above.
It can cause damage to the projector.

  • *For more details

For more details on HL16000HD(N)/HL16000Dsx+(N)/HL12000HD/HL10000HD/HL12000/HL8000Dsx+, see * 1 "On HL16000HD(N)/HL16000Dsx+(N)/HL12000HD/HL10000HD/HL12000/HL8000Dsx+".
For more details on HT1100, see * 2 "On HT1100".
For more details on MMS1000, see * 3 "On MMS1000".
For more details on MT1060/MT1065, see * 4 "On MT1065/MT1060".
For more details on VT770, see * 5 " On VT770".

On HL16000HD(N)/HL16000Dsx+(N)/HL12000HD/HL10000HD/HL12000/HL8000Dsx+
To use this software, MM-WARP board must be equipped.

On HT1100
Verifying the version

  • TTurn on the projector and then select [Information] → [4] from the menu.
  • If [Firmware] in [Version] indicates " Ver1.04 " or later, the projector is supported by the software.
    To update the firmware, read the " Firmware : Update Software " section of [Sofware & Driver].
  • Select the [Detailed Mode] for LAN connection. When the [Simple Mode] is selected, the projector name will not be displayed in the [Projector List] window.

On MMS1000
To use this software, MM-WARP board must be equipped. The [U & D symmetry] and [R & L symmetry] of Correct Linearity function are not supported.

On MT1065 / MT1060
Verifying the version

  • Turn on the projector and then select [Help] → [Information] → [Page 4] from the menu.
  • If [Firmware] in [Version] indicates " Ver. 1.09 " or later, the projector is supported by the software.
  • If there is no [Page 4] in [Help]-[Information], you need to replace the firmware with the latest one.
    To update the firmware, read the " Firmware : Update Software " section of [Sofware & Driver].

On VT770
Verifying the version

  • Turn on the projector and then select [Information] → [4] from the menu.
  • If [Firmware] in [Version] indicates "Ver1.03" or later, the projector is supported by the software.
    To update the firmware, read the " Firmware : Update Software " section of [Sofware & Driver].

Supported OS

  • Windows 2000 Professional
  • Windows XP Home Edition
  • Windows XP Professional
  • Windows XP Tablet PC Edition
  • Windows Vista Home Basic (*)
  • Windows Vista Home Premium (*)
  • Windows Vista Business (*)
  • Windows Vista Enterprise (*)
  • Windows Vista Ultimate (*)
    (*)32bits version

System requirements

System requirements for running Microsoft Windows Vista/XP/2000

Connections

There are five ways to make connections as follows:

  1. Connection using a serial port :
    A serial cable is required.
  2. Connection using the USB port :
    A USB cable is required.
  3. Connection using a LAN port :
    A LAN cable is required.
  4. Connection using a wired LAN card :
    A wired LAN card and a LAN cable are required.
  5. Connection using a wireless LAN card :
    A wireless LAN card is required.

Status of supported connection

  (1)
Serial port
(2)
USB port
(3)
LAN port
(4)
Wired
LAN card
(5)
Wireless
LAN card
GT5000/GT6000 Yes Yes Yes Yes Yes
LT240K/LT260K Yes Yes No Yes Yes
MT1060/MT1065 Yes Yes No Yes Yes
HT1100 Yes No No Yes * No
VT770 Yes No No No No
MT1075 Yes Yes No Yes Yes
LT245/LT265 Yes No Yes No Yes
MMS1000/HL16000HD(N)/
HL16000Dsx+(N)/
HL12000HD/HL10000HD/
HL12000/HL8000Dsx+
Yes Yes Yes Yes Yes
LT280/LT380 Yes No Yes No Yes
NP1000/NP2000 Yes No Yes No Yes

Yes: Supported
No: Not supported

  • *Select the [Detailed Mode] for LAN connection.
    When the [Simple Mode] is selected, the projector name will not be displayed in the [Projector List] window.
  • The GT5000 and the GT6000 does not come with a USB cable.
  • The LT240K and the LT260K come with a USB cable.
  • The MT1060 and the MT1065 come with a USB cable.
  • The MT1075 comes with a USB cable.
  • A serial cable, LAN cable, wired LAN card and wireless LAN card are sold separately.
  • The MMS1000 and HL16000HD(N)/HL16000Dsx+(N)/HL12000HD/HL10000HD/HL12000/HL8000Dsx+ do not come with a USB cable.

Installation instruction

When installing / uninstalling software in Windows Vista, you must log on as a user with " Administrator" rights.
When installing / uninstalling software in Windows XP, you must log on as a user with "Computer Administrator" rights.
For Windows 2000, log on as a user with "Administrators" rights.

Go to download

Sorry, you cannot download these contents on this page from Cuba, Iran, Korea(North), Syria, Ukraine(Crimean region). These software programs and manuals subject to U.S. Export Administration Regulations. We shall not reexport or release them to the national below, without a license by BIS (a section of U.S. Government).

Notification: About the company name in the “Software License Agreement”
The company name described in the “Software License Agreement” for the software is the old company name.
Please read the company name as the new company name.
Old: NEC Display Solutions, Ltd.
New: Sharp NEC Display Solutions, Ltd.

Click the filename from the following list.

language file name file size
English The Geometric Correction Tool 3.0
GCT303.exe
6.74MB

Top of this page