Beginning of this page.
Jump to main content.

Please note that JavaScript and style sheet are used in this website,
Due to unadaptability of the style sheet with the browser used in your computer, pages may not look as original.
Even in such a case, however, the contents can be used safely.

NEC NEC Display Solutions, Ltd.
Site menu starts here.
Skip site menu.
End of site menu.
Displaying present location in the site.
Home > Download > Projector | Software & Driver > File Description
Menu starts here.
Skip menu.
End of menu.
Main content starts here.

File Description

Firmware

HT1100 Update Software Previous

This software will update your firmware and setting data with the following features.
New features
  • To be applicable with Geometric Correction Tool.

LT265 / LT245 Update Software Previous

This software will update your firmware and setting data with the following features.
New features in Ver.1.06
  • The improvement of the wireless LAN connection performance.
  • The improvement of the performance of the connection with the specific access point.
  • The improvement of the HDTV image quality.
  • Supported optional USB memory (NP01MD).
  • The improvement of the performance of the connection with Image Express Utility2.0.
  • Picture from Image Express Utility can be frozen when FREEZE key is pressed by remote control at LAN mode.
  • Available for Image Express Utility 2.0(ver 2.04:Support of LT280/LT380/NP1000/NP2000)

Top of this page

MT860 Update Software Previous

This software will update your firmware and setting data with the following features.
New features in Ver.1.15
  • Power management function is improved.
in Ver.1.14
  • Additional support Device
Device Model Note
USB
Memory		 CruzerMini 256MB no
CruzerMini 128MB no
PenDrive no
Wireless LAN AmbiCom WL1100C Please use for over 5 degrees C around the PJ.
D-Link DCF-660W no
NETGEAR MA701 no

MT1065 / MT1060 Update Software Previous

This software will update your firmware and setting data with the following features.
New features in Ver.1.15
  • Power management function is improved.
in Ver.1.14
  • Additional support Device.
Device Model Note
USB
Memory		 CruzerMini 256MB no
CruzerMini 128MB no
PenDrive no
Wireless LAN AmbiCom WL1100C Please use for over 5 degrees C around the PJ.
D-Link DCF-660W no
NETGEAR MA701 no

Top of this page

MT1075 Update Software Previous

This software will update your firmware and setting data with the following features.
New features in Ver.1.04
  • Power management function is improved.

NP2000 / NP1000 Update Software Previous

This software will update your firmware and setting data with the following features.
New features in Ver.1.05
  • Corrections to the error status display for HTTP server / SNMP / PJLink
  • Corrections to bugs and problems with PJLink

VT770 Update Software Previous

This software will update your firmware and setting data with the following features.
New features in Ver.1.06
  • Supported optional USB memory (NP01MD).
in Ver.1.05
  • Support of USB READER "ImageMate USB 2.0 Reader/Writer SDDR-93-03"
  • Improvement of the San Disk products USB memory and USB card reader recognition.

Top of this page

WT600 Update Software Previous

This software will update your firmware and setting data with the following features.
New features in Ver.1.09
  • Supported optional USB memory (NP01MD).
  • Improvement of the San Disk products USB memory and USB card reader recognition.

WT615 / WT610 Update Software Previous

This software will update your firmware and setting data with the following features.
New features in Ver.1.09
  • Improvement of connection capability by Wireless LAN.
  • Improvement of connection capability with Image Express Utility 2.0.
  • Available for Image Express Utility 2.0 ( Ver.2.05 )

Top of this page

Software

NEC Software Utility Installation Guide (4rd edition) Previous

"NEC Software Utility Installation Guide" gives an overview and describes the use of the following software. Look over this guide in conjunction with the Help function of the software programs.
  • Dynamic Image Utility 2.0
  • Image Express Utility 1.0
  • Viewer PPT Converter 2.0

Desktop Control Utility 1.0 Previous

"Desktop Control Utility 1.0" is softwarethat operates the desktop screen of a personal computer at a remote location from the projector by using a network.
  • A commercially available USB mouse is connected to the projector to operate the personal computer.
  • By using Desktop Control Utility 1.0, you can project presentation materials (such as PowerPoint slideshows) from the projector without moving your personal computer to the conference room.

Top of this page

Dynamic Image Utility 2.0 Previous

  • Converts PowerPoint files, JPEG images, and other files and creates slides that can be displayed with the viewer function of the projector.
  • Captures portions of the image from the screens of word processors, spreadsheets, browsers, and other programs for use in presentations.
  • By saving the created slides on a flash memory card (*1) and inserting the card into the PC Card slot of the projector, the slides can be projected to the screen without connecting a personal computer.
  • The connection of personal computers and projectors by means of a network environment (*2) or connection with USB cable(*3) or serial cable allows the following uses. (In a network environment or USB cable connection(*3), support of multiple units is permitted.)
(1) Images and slides can be sent from the personal computer to the projector and then projected to the screen. When using Microsoft PowerPoint 2000/2002/2003, slides can be sent synchronized with the slide show page feed.
(2) A personal computer can be used to switch the projector power on/off, control the adjustment of image quality and other settings, and to display the remaining lamp life

eBeam Interactive Previous

Like a USB mouse, using the electronic pen enables you to operate the personal computer.
Furthermore, assuming that the projector screen as a white board, any characters and figures can be drawn on it using the electronic pen.

Top of this page

Geometric Correction Tool Previous

"The Geometric Correction Tool " corrects geometrical distortion of an image projected onto a special shaped screen such as a cylindrical screen, and a spherical screen from the projector. This program allows you to control the projector via a computer. .

Image Express Utility 1.0 Previous

  • Using a network environment (*2), this program enables the screen image displayed by the personal computer to be sent to the projector and then projected to a screen.
  • Two methods are available for sending the screen image to the projector. "Continuous Transmit" automatically sends the screen image of the personal computer at a fixed interval. "Single Frame Transmit" sends the screen image by clicking the screen button (or pressing a key).

Top of this page

Image Express Utility 2.0 Previous

"Image Express Utility 2.0" is a software tool used to send the screen of your personal computerto the projector via a network, without the signal cables.
  • NEC's original compression algorithm allows high-quality images to be sent over the networkat high speed, from your personal computer to the projector.
  • Images can be sent from a personal computer to not only one projector but also to two ormore projectors at the same time.

Image Express Utility 2 for Mac OS (Intel) Previous

  • "Image Express Utility 2 for Mac OS" is a software program to send images on the Macintoshscreen to a projector via wireless/wired LAN to project them on the screen.
  • "Image Express Utility 2 for Mac OS (Intel)" runs on Mac OS X 10.4.4 (Intel) or higher. It doesnot run on Mac OS (PowerPC).

Top of this page

Image Express Utility 2 for Mac OS (PowerPC) Previous

  • "Image Express Utility 2 for Mac OS" is a software program to send images on the Macintoshscreen to a projector via wireless/wired LAN to project them on the screen.
  • "Image Express Utility 2 for Mac OS" runs on Mac OS X 10.2.8 or higher.

Image Express Utility Lite Previous

    Image Express Utility Lite is software that projects a PC's display on a projector.
    It allows the PC's display to be transferred to a projector using the network with high quality and at high speed.
  • USB Display
    • Computer's screen image can be projected via a USB cable, without connecting a computer cable (VGA).
    • Just connecting the computer and the projector over a USB cable will make the USB Display function available (Plug & Play) even without installing Image Express Utility Lite on the computer.
  • Image transmission
    • The screen of your computer can be sent to the projector via a wired or wireless network without a computer cable (VGA).
    • By using "EASY CONNECTION" function, the complicated network settings can be simplified and the computer will automatically connect to the projector.
    • The screen of your computer can be sent to up to four projectors at the same time.
  • Geometric Correction Tool (GCT)
    • The Geometric Correction Tool (GCT) function allows you to correct distortion of images projected even from an angle.

PC Control Utility 1.0 Previous

Software used to control a projector with a personal computer. It can be changed the background image, which is displayed in the absence of an input signal.
* This function is used with the projector and the personal computer connected by a serial cable.

Top of this page

PC Control Utility 3.0 Previous

"PC Control Utility 3.0" is software that allows you to operate the projector from the personalcomputer when the personal computer and the projector are connected with LAN (wired or wireless) or a serial cable(RS-232C).

PC Control Utility Pro 3.0 Previous

"PC Control Utility Pro 3.0" is a program for controlling the projector connected through various communications methods (LAN or serial), for operating and managing the projectors.

PC Control Utility Pro 4 Previous

The software controls the power on/off switching, the input signal switching, and other functions of the connected projector, and manages the lamp usage time and wide variety of other information.
The software also permits control of the projector according to a specified schedule, and can send e-mail when an error has occurred with the projector.

Top of this page

Viewer PPT Converter 2.0 Previous

  • Converts files created with Microsoft PowerPoint 95/97/2000/2002/2003 to an independent index format with a simple operation to enable direct playback with the viewer function of the projector.
  • When using Microsoft PowerPoint 2000/2002/2003, Viewer PPT Converter 2.0 can be started from PowerPoint (by means of add-in registration to PowerPoint).

Viewer PPT Converter 3.0 (Supported Windows 2000) Previous

"Viewer PPT Converter 3.0" is software that converts files created with PowerPoint 95/97/2000/2002/2003/2007 into an index file that can be displayed with the viewer function of the projector.
  • If PowerPoint 2000/2002/2003/2007 is installed in your personal computer, you can activate Viewer PPT Converter 3.0 from PowerPoint (PPT Converter add-in is automatically registeredto PowerPoint).

Viewer PPT Converter 3.0 Previous

"Viewer PPT Converter 3.0" is software that converts files created with PowerPoint 95/97/2000/2002/2003/2007/2010 into an index file that can be displayed with the viewer function of the projector.
  • If PowerPoint 2000/2002/2003/2007/2010 is installed in your personal computer, you can activate Viewer PPT Converter 3.0 from PowerPoint (PPT Converter add-in is automatically registeredto PowerPoint).

Top of this page

Viewer Utility Previous

Software used to change screen, image file, PowerPoint® file of the personal computer into the format which can be displayed using the viewer feature of the projector.

Virtual Remote Tool (Supported Windows2000) Previous

"Virtual Remote Tool" is software for operating a projector from a computer; the projector is connected with a computer connection cable (signal cable).

    The following projector operations are possible from the personal computer:
  • Power on / off
  • Input signal switching
  • Muting (temporarily disabling audio / video)
  • Freezing (locking the projected image)
  • Operating Remote Control
[Note]
Use the supplied VGA signal cable for your projector. This function may not work depending on the specifications of your connected computer or your graphics adaptor and the version of your driver.

Virtual Remote Tool Previous

This is software for operating a projector connected by LAN (wired or wireless), serial connections (RS-232C) or computer connection cable (signal cable) from the computer.
    The following projector operations are possible from the personal computer:
  • Power on / off
  • Input signal switching
  • Muting (temporarily disabling audio / video)
  • Freezing (locking the projected image)
  • Operating Remote Control
  • The logo image transmission
[Note]
Logo image transmission and computer cable connection are not possible depending on the projector types.
Use the supplied VGA signal cable for your projector. This function may not work depending on the specifications of your connected computer or your graphics adaptor and the version of your driver.

Patch

ArcSoft MediaImpression Version Upgrade Patch Previous

  • The patch to upgrade the ArcSoft MediaImpression contained in the Projector application CD-ROM.

Ulead Photo Explorer 8.0 SE Basic for NEC Projector Update Patch
for Windows Vista Previous

  • This is the Patch which enabels you to use Ulead Photo Explorer 8.0 SE Basic for NEC Projector (“PEX8”) on Windows Vista®.

Driver & Utility

NWL-100 Previous

Driver for NWL-100 with Windows 2000/XP personal computer.

Top of this page

End of main content.
Copyright NEC Display Solutions, Ltd. All rights reserved.